X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=README;h=bb5b46e33791c787cf492deac85c45a0a7142214;hb=e80955f07de03fef0196353e77534b2300193c1c;hp=aa17e4650c0c04aa1042aca275b186ccede03aa7;hpb=4c52783b3d024e153c4972b97332e314bc3bdc46;p=u-boot diff --git a/README b/README index aa17e4650c..bb5b46e337 100644 --- a/README +++ b/README @@ -164,6 +164,7 @@ Directory Hierarchy: - lib_mips Files generic to MIPS architecture - lib_nios Files generic to NIOS architecture - lib_ppc Files generic to PowerPC architecture +- libfdt Library files to support flattened device trees - net Networking code - post Power On Self Test - rtc Real Time Clock drivers @@ -430,12 +431,23 @@ The following options need to be configured: expect it to be in bytes, others in MB. Define CONFIG_MEMSIZE_IN_BYTES to make it in bytes. - CONFIG_OF_FLAT_TREE + CONFIG_OF_LIBFDT / CONFIG_OF_FLAT_TREE New kernel versions are expecting firmware settings to be - passed using flat open firmware trees. - The environment variable "disable_of", when set, disables this - functionality. + passed using flattened device trees (based on open firmware + concepts). + + CONFIG_OF_LIBFDT + * New libfdt-based support + * Adds the "fdt" command + * The bootm command does _not_ modify the fdt + + CONFIG_OF_FLAT_TREE + * Deprecated, see CONFIG_OF_LIBFDT + * Original ft_build.c-based support + * Automatically modifies the dft as part of the bootm command + * The environment variable "disable_of", when set, + disables this functionality. CONFIG_OF_FLAT_TREE_MAX_SIZE @@ -448,13 +460,16 @@ The following options need to be configured: CONFIG_OF_HAS_BD_T - The resulting flat device tree will have a copy of the bd_t. - Space should be pre-allocated in the dts for the bd_t. + * CONFIG_OF_LIBFDT - enables the "fdt bd_t" command + * CONFIG_OF_FLAT_TREE - The resulting flat device tree + will have a copy of the bd_t. Space should be + pre-allocated in the dts for the bd_t. CONFIG_OF_HAS_UBOOT_ENV - The resulting flat device tree will have a copy of u-boot's - environment variables + * CONFIG_OF_LIBFDT - enables the "fdt bd_t" command + * CONFIG_OF_FLAT_TREE - The resulting flat device tree + will have a copy of u-boot's environment variables CONFIG_OF_BOARD_SETUP @@ -703,6 +718,7 @@ The following options need to be configured: CFG_CMD_VFD * VFD support (TRAB) CFG_CMD_BSP * Board SPecific functions CFG_CMD_CDP * Cisco Discover Protocol support + CFG_CMD_FSL * Microblaze FSL support ----------------------------------------------- CFG_CMD_ALL all @@ -721,6 +737,8 @@ The following options need to be configured: #define CONFIG_COMMANDS (CFG_CMD_ALL & ~CFG_CMD_NET) + Other Commands: + fdt (flattened device tree) command: CONFIG_OF_LIBFDT Note: Don't enable the "icache" and "dcache" commands (configuration option CFG_CMD_CACHE) unless you know @@ -1207,7 +1225,12 @@ The following options need to be configured: clock chips. See common/cmd_i2c.c for a description of the command line interface. - CONFIG_HARD_I2C selects the CPM hardware driver for I2C. + CONFIG_I2C_CMD_TREE is a recommended option that places + all I2C commands under a single 'i2c' root command. The + older 'imm', 'imd', 'iprobe' etc. commands are considered + deprecated and may disappear in the future. + + CONFIG_HARD_I2C selects a hardware I2C controller. CONFIG_SOFT_I2C configures u-boot to use a software (aka bit-banging) driver instead of CPM or similar hardware @@ -1312,6 +1335,52 @@ The following options need to be configured: in u-boot bd_info structure based on u-boot environment variable "i2cfast". (see also i2cfast) + CONFIG_I2C_MULTI_BUS + + This option allows the use of multiple I2C buses, each of which + must have a controller. At any point in time, only one bus is + active. To switch to a different bus, use the 'i2c dev' command. + Note that bus numbering is zero-based. + + CFG_I2C_NOPROBES + + This option specifies a list of I2C devices that will be skipped + when the 'i2c probe' command is issued (or 'iprobe' using the legacy + command). If CONFIG_I2C_MULTI_BUS is set, specify a list of bus-device + pairs. Otherwise, specify a 1D array of device addresses + + e.g. + #undef CONFIG_I2C_MULTI_BUS + #define CFG_I2C_NOPROBES {0x50,0x68} + + will skip addresses 0x50 and 0x68 on a board with one I2C bus + + #define CONFIG_I2C_MULTI_BUS + #define CFG_I2C_MULTI_NOPROBES {{0,0x50},{0,0x68},{1,0x54}} + + will skip addresses 0x50 and 0x68 on bus 0 and address 0x54 on bus 1 + + CFG_SPD_BUS_NUM + + If defined, then this indicates the I2C bus number for DDR SPD. + If not defined, then U-Boot assumes that SPD is on I2C bus 0. + + CFG_RTC_BUS_NUM + + If defined, then this indicates the I2C bus number for the RTC. + If not defined, then U-Boot assumes that RTC is on I2C bus 0. + + CFG_DTT_BUS_NUM + + If defined, then this indicates the I2C bus number for the DTT. + If not defined, then U-Boot assumes that DTT is on I2C bus 0. + + CONFIG_FSL_I2C + + Define this option if you want to use Freescale's I2C driver in + drivers/fsl_i2c.c. + + - SPI Support: CONFIG_SPI Enables SPI driver (so far only tested with @@ -1470,8 +1539,8 @@ The following options need to be configured: Enable auto completion of commands using TAB. - Note that this feature has NOT been implemented yet - for the "hush" shell. + Note that this feature has NOT been implemented yet + for the "hush" shell. CFG_HUSH_PARSER @@ -2209,6 +2278,24 @@ Low Level (hardware related) configuration options: CFG_POCMR2_MASK_ATTRIB: (MPC826x only) Overrides the default PCI memory map in cpu/mpc8260/pci.c if set. +- CONFIG_SPD_EEPROM + Get DDR timing information from an I2C EEPROM. Common with pluggable + memory modules such as SODIMMs + SPD_EEPROM_ADDRESS + I2C address of the SPD EEPROM + +- CFG_SPD_BUS_NUM + If SPD EEPROM is on an I2C bus other than the first one, specify here. + Note that the value must resolve to something your driver can deal with. + +- CFG_83XX_DDR_USES_CS0 + Only for 83xx systems. If specified, then DDR should be configured + using CS0 and CS1 instead of CS2 and CS3. + +- CFG_83XX_DDR_USES_CS0 + Only for 83xx systems. If specified, then DDR should be configured + using CS0 and CS1 instead of CS2 and CS3. + - CONFIG_ETHER_ON_FEC[12] Define to enable FEC[12] on a 8xx series processor. @@ -3114,11 +3201,11 @@ loadaddr=200000 oftaddr=0x300000 => bootm $loadaddr - $oftaddr ## Booting image at 00200000 ... - Image Name: Linux-2.6.17-dirty - Image Type: PowerPC Linux Kernel Image (gzip compressed) - Data Size: 1029343 Bytes = 1005.2 kB + Image Name: Linux-2.6.17-dirty + Image Type: PowerPC Linux Kernel Image (gzip compressed) + Data Size: 1029343 Bytes = 1005.2 kB Load Address: 00000000 - Entry Point: 00000000 + Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Booting using flat device tree at 0x300000