X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=README;h=d8cb3940d4f04810dcc6fe88a5f03f0b0cd5d8a8;hb=4a207e8b9a1ecc3e87d5a63bb5442dbcd50bd4b6;hp=e00a7c2a8a39b50e9b292ed1d5966f61e8c9559b;hpb=170ab11075d3be56e89d6444abf1148329130f4b;p=u-boot diff --git a/README b/README index e00a7c2a8a..d8cb3940d4 100644 --- a/README +++ b/README @@ -616,6 +616,14 @@ The following options need to be configured: boot loader that has already initialized the UART. Define this variable to flush the UART at init time. + CONFIG_SYS_NS16550_BROKEN_TEMT + + 16550 UART set the Transmitter Empty (TEMT) Bit when all output + has finished and the transmitter is totally empty. U-Boot waits + for this bit to be set to initialize the serial console. On some + broken platforms this bit is not set in SPL making U-Boot to + hang while waiting for TEMT. Define this option to avoid it. + - Console Interface: Depending on board, define exactly one serial port @@ -815,6 +823,8 @@ The following options need to be configured: CONFIG_CMD_EDITENV edit env variable CONFIG_CMD_EEPROM * EEPROM read/write support CONFIG_CMD_ELF * bootelf, bootvx + CONFIG_CMD_ENV_CALLBACK * display details about env callbacks + CONFIG_CMD_ENV_FLAGS * display details about env flags CONFIG_CMD_EXPORTENV * export the environment CONFIG_CMD_EXT2 * ext2 command support CONFIG_CMD_EXT4 * ext4 command support @@ -847,6 +857,7 @@ The following options need to be configured: CONFIG_CMD_LOADS loads CONFIG_CMD_MD5SUM print md5 message digest (requires CONFIG_CMD_MEMORY and CONFIG_MD5) + CONFIG_CMD_MEMINFO * Display detailed memory information CONFIG_CMD_MEMORY md, mm, nm, mw, cp, cmp, crc, base, loop, loopw, mtest CONFIG_CMD_MISC Misc functions like sleep etc @@ -1484,6 +1495,21 @@ CBFS (Coreboot Filesystem) support Normally display is black on white background; define CONFIG_SYS_WHITE_ON_BLACK to get it inverted. + CONFIG_LCD_ALIGNMENT + + Normally the LCD is page-aligned (tyically 4KB). If this is + defined then the LCD will be aligned to this value instead. + For ARM it is sometimes useful to use MMU_SECTION_SIZE + here, since it is cheaper to change data cache settings on + a per-section basis. + + CONFIG_CONSOLE_SCROLL_LINES + + When the console need to be scrolled, this is the number of + lines to scroll by. It defaults to 1. Increasing this makes + the console jump but can help speed up operation when scrolling + is slow. + CONFIG_LCD_BMP_RLE8 Support drawing of RLE8-compressed bitmaps on the LCD. @@ -1493,7 +1519,6 @@ CBFS (Coreboot Filesystem) support Enables an 'i2c edid' command which can read EDID information over I2C from an attached LCD display. - - Splash Screen Support: CONFIG_SPLASH_SCREEN If this option is set, the environment is checked for @@ -2187,6 +2212,11 @@ CBFS (Coreboot Filesystem) support serial# is unaffected by this, i. e. it remains read-only.] + The same can be accomplished in a more flexible way + for any variable by configuring the type of access + to allow for those variables in the ".flags" variable + or define CONFIG_ENV_FLAGS_LIST_STATIC. + - Protected RAM: CONFIG_PRAM @@ -2357,6 +2387,15 @@ CBFS (Coreboot Filesystem) support run-time determined information about the hardware to the environment. These will be named board_name, board_rev. + CONFIG_DELAY_ENVIRONMENT + + Normally the environment is loaded when the board is + intialised so that it is available to U-Boot. This inhibits + that so that the environment is not available until + explicitly loaded later by U-Boot code. With CONFIG_OF_CONTROL + this is instead controlled by the value of + /config/load-environment. + - DataFlash Support: CONFIG_HAS_DATAFLASH @@ -2383,6 +2422,11 @@ CBFS (Coreboot Filesystem) support CONFIG_SF_DEFAULT_MODE (see include/spi.h) CONFIG_SF_DEFAULT_SPEED in Hz + CONFIG_CMD_SF_TEST + + Define this option to include a destructive SPI flash + test ('sf test'). + - SystemACE Support: CONFIG_SYSTEMACE @@ -2670,10 +2714,13 @@ FIT uImage format: CONFIG_FB_ADDR Define CONFIG_FB_ADDR if you want to use specific - address for frame buffer. - Then system will reserve the frame buffer address to - defined address instead of lcd_setmem (this function - grabs the memory for frame buffer by panel's size). + address for frame buffer. This is typically the case + when using a graphics controller has separate video + memory. U-Boot will then place the frame buffer at + the given address instead of dynamically reserving it + in system RAM by calling lcd_setmem(), which grabs + the memory for the frame buffer depending on the + configured panel size. Please see board_init_f function. @@ -2772,6 +2819,12 @@ FIT uImage format: CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME Filename to read to load U-Boot when reading from FAT + CONFIG_SPL_MPC83XX_WAIT_FOR_NAND + Set this for NAND SPL on PPC mpc83xx targets, so that + start.S waits for the rest of the SPL to load before + continuing (the hardware starts execution after just + loading the first page rather than the full 4K). + CONFIG_SPL_NAND_BASE Include nand_base.c in the SPL. Requires CONFIG_SPL_NAND_DRIVERS. @@ -2829,6 +2882,10 @@ FIT uImage format: CONFIG_SPL_LIBGENERIC_SUPPORT Support for lib/libgeneric.o in SPL binary + CONFIG_SPL_PAD_TO + Linker address to which the SPL should be padded before + appending the SPL payload. + CONFIG_SPL_TARGET Final target image containing SPL and payload. Some SPLs use an arch-specific makefile fragment instead, for @@ -2968,9 +3025,6 @@ Configuration Settings: non page size aligned address and this could cause major problems. -- CONFIG_SYS_TFTP_LOADADDR: - Default load address for network file downloads - - CONFIG_SYS_LOADS_BAUD_CHANGE: Enable temporary baudrate change while serial download @@ -3112,6 +3166,49 @@ Configuration Settings: cases. This setting can be used to tune behaviour; see lib/hashtable.c for details. +- CONFIG_ENV_FLAGS_LIST_DEFAULT +- CONFIG_ENV_FLAGS_LIST_STATIC + Enable validation of the values given to enviroment variables when + calling env set. Variables can be restricted to only decimal, + hexadecimal, or boolean. If CONFIG_CMD_NET is also defined, + the variables can also be restricted to IP address or MAC address. + + The format of the list is: + type_attribute = [s|d|x|b|i|m] + access_atribute = [a|r|o|c] + attributes = type_attribute[access_atribute] + entry = variable_name[:attributes] + list = entry[,list] + + The type attributes are: + s - String (default) + d - Decimal + x - Hexadecimal + b - Boolean ([1yYtT|0nNfF]) + i - IP address + m - MAC address + + The access attributes are: + a - Any (default) + r - Read-only + o - Write-once + c - Change-default + + - CONFIG_ENV_FLAGS_LIST_DEFAULT + Define this to a list (string) to define the ".flags" + envirnoment variable in the default or embedded environment. + + - CONFIG_ENV_FLAGS_LIST_STATIC + Define this to a list (string) to define validation that + should be done if an entry is not found in the ".flags" + environment variable. To override a setting in the static + list, simply add an entry for the same variable name to the + ".flags" variable. + +- CONFIG_ENV_ACCESS_IGNORE_FORCE + If defined, don't allow the -f switch to env set override variable + access flags. + The following definitions that deal with the placement and management of environment data (variable area); in general, we support the following configurations: @@ -3387,6 +3484,16 @@ use the "saveenv" command to store a valid environment. space for already greatly restricted images, including but not limited to NAND_SPL configurations. +- CONFIG_DISPLAY_BOARDINFO + Display information about the board that U-Boot is running on + when U-Boot starts up. The board function checkboard() is called + to do this. + +- CONFIG_DISPLAY_BOARDINFO_LATE + Similar to the previous option, but display this information + later, once stdio is running and output goes to the LCD, if + present. + Low Level (hardware related) configuration options: --------------------------------------------------- @@ -3709,14 +3816,9 @@ Low Level (hardware related) configuration options: be used if available. These functions may be faster under some conditions but may increase the binary size. -- CONFIG_X86_NO_RESET_VECTOR - If defined, the x86 reset vector code is excluded. You will need - to do this when U-Boot is running from Coreboot. - -- CONFIG_X86_NO_REAL_MODE - If defined, x86 real mode code is omitted. This assumes a - 32-bit environment where such code is not needed. You will - need to do this when U-Boot is running from Coreboot. +- CONFIG_X86_RESET_VECTOR + If defined, the x86 reset vector code is included. This is not + needed when U-Boot is running from Coreboot. Freescale QE/FMAN Firmware Support: