X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=README;h=e772c1af008845bbaf01e3f899d702e98678fa84;hb=4f92ed5fc083631ac7aef6c027cdf1177befd204;hp=59f4cd2872a3307a94a0917cda00903078bfad24;hpb=2770bcb21c82835a5351176e5b2a9221d7fc8ef9;p=u-boot

diff --git a/README b/README
index 59f4cd2872..e772c1af00 100644
--- a/README
+++ b/README
@@ -262,12 +262,13 @@ The following options need to be configured:
 		PowerPC based boards:
 		---------------------
 
-		CONFIG_ADCIOP		CONFIG_GEN860T		CONFIG_PCI405
-		CONFIG_ADS860		CONFIG_GENIETV		CONFIG_PCIPPC2
-		CONFIG_AMX860		CONFIG_GTH		CONFIG_PCIPPC6
-		CONFIG_AP1000		CONFIG_gw8260		CONFIG_pcu_e
-		CONFIG_AR405		CONFIG_hermes		CONFIG_PIP405
-		CONFIG_BAB7xx		CONFIG_hymod		CONFIG_PM826
+		CONFIG_ADCIOP		CONFIG_FPS860L		CONFIG_OXC
+		CONFIG_ADS860		CONFIG_GEN860T		CONFIG_PCI405
+		CONFIG_AMX860		CONFIG_GENIETV		CONFIG_PCIPPC2
+		CONFIG_AP1000		CONFIG_GTH		CONFIG_PCIPPC6
+		CONFIG_AR405		CONFIG_gw8260		CONFIG_pcu_e
+		CONFIG_BAB7xx		CONFIG_hermes		CONFIG_PIP405
+		CONFIG_BC3450		CONFIG_hymod		CONFIG_PM826
 		CONFIG_c2mon		CONFIG_IAD210		CONFIG_ppmc8260
 		CONFIG_CANBT		CONFIG_ICU862		CONFIG_QS823
 		CONFIG_CCM		CONFIG_IP860		CONFIG_QS850
@@ -299,19 +300,19 @@ The following options need to be configured:
 		CONFIG_FADS860T		CONFIG_NX823		CONFIG_WALNUT
 		CONFIG_FLAGADM		CONFIG_OCRTC		CONFIG_ZPC1900
 		CONFIG_FPS850L		CONFIG_ORSG		CONFIG_ZUMA
-		CONFIG_FPS860L		CONFIG_OXC
 
 		ARM based boards:
 		-----------------
 
 		CONFIG_ARMADILLO,	CONFIG_AT91RM9200DK,	CONFIG_CERF250,
 		CONFIG_CSB637,		CONFIG_DELTA,		CONFIG_DNP1110,
-	 	CONFIG_EP7312,		CONFIG_H2_OMAP1610,	CONFIG_HHP_CRADLE,
-		CONFIG_IMPA7,		CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610, 
+		CONFIG_EP7312,		CONFIG_H2_OMAP1610,	CONFIG_HHP_CRADLE,
+		CONFIG_IMPA7,	    CONFIG_INNOVATOROMAP1510,	CONFIG_INNOVATOROMAP1610,
 		CONFIG_KB9202,		CONFIG_LART,		CONFIG_LPD7A400,
 		CONFIG_LUBBOCK,		CONFIG_OSK_OMAP5912,	CONFIG_OMAP2420H4,
-		CONFIG_SHANNON,		CONFIG_P2_OMAP730,	CONFIG_SMDK2400,
-		CONFIG_SMDK2410,	CONFIG_TRAB,		CONFIG_VCMA9
+		CONFIG_PLEB2,		CONFIG_SHANNON,		CONFIG_P2_OMAP730,
+		CONFIG_SMDK2400,	CONFIG_SMDK2410,	CONFIG_TRAB,
+		CONFIG_VCMA9
 
 		MicroBlaze based boards:
 		------------------------
@@ -322,6 +323,7 @@ The following options need to be configured:
 		------------------------
 
 		CONFIG_PCI5441 CONFIG_PK1C20
+		CONFIG_EP1C20 CONFIG_EP1S10 CONFIG_EP1S40
 
 
 - CPU Module Type: (if CONFIG_COGENT is defined)
@@ -388,12 +390,12 @@ The following options need to be configured:
 		frequency is this value multiplied by 13 MHz.
 
 		CFG_MONAHANS_TURBO_RUN_MODE_RATIO
-		
+
 		Defines the Monahans turbo mode to oscillator
 		ratio. Valid values are 1 (default if undefined) and
-		2. The core frequency as calculated above is multiplied 
+		2. The core frequency as calculated above is multiplied
 		by this value.
-		
+
 - Linux Kernel Interface:
 		CONFIG_CLOCKS_IN_MHZ
 
@@ -1488,6 +1490,12 @@ The following options need to be configured:
 		of the backslashes before semicolons and special
 		symbols.
 
+- Commandline Editing and History:
+		CONFIG_CMDLINE_EDITING
+
+		Enable editiong and History functions for interactive
+		commandline input operations
+
 - Default Environment:
 		CONFIG_EXTRA_ENV_SETTINGS
 
@@ -3309,6 +3317,8 @@ On ARM, the following registers are used:
 
     ==> U-Boot will use R8 to hold a pointer to the global data
 
+NOTE: DECLARE_GLOBAL_DATA_PTR must be used with file-global scope,
+or current versions of GCC may "optimize" the code too much.
 
 Memory Management:
 ------------------