X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=README;h=f14fb7bad2a6a0427da196528a6d17e0d642d389;hb=c918261c6d9f265f88baf70f8a73dfe6f0cb9596;hp=3f3666879137a846c9fb616af281173f555931cb;hpb=5c395393cc9b85b14c5481dbcab6b67b54f31622;p=u-boot diff --git a/README b/README index 3f36668791..f14fb7bad2 100644 --- a/README +++ b/README @@ -153,6 +153,8 @@ Directory Hierarchy: - at32ap Files specific to Atmel AVR32 AP CPUs - i386 Files specific to i386 CPUs - ixp Files specific to Intel XScale IXP CPUs + - leon2 Files specific to Gaisler LEON2 SPARC CPU + - leon3 Files specific to Gaisler LEON3 SPARC CPU - mcf52x2 Files specific to Freescale ColdFire MCF52x2 CPUs - mcf5227x Files specific to Freescale ColdFire MCF5227x CPUs - mcf532x Files specific to Freescale ColdFire MCF5329 CPUs @@ -186,6 +188,7 @@ Directory Hierarchy: - lib_mips Files generic to MIPS architecture - lib_nios Files generic to NIOS architecture - lib_ppc Files generic to PowerPC architecture +- lib_sparc Files generic to SPARC architecture - libfdt Library files to support flattened device trees - net Networking code - post Power On Self Test @@ -372,19 +375,6 @@ The following options need to be configured: boards with QUICC Engines require OF_QE to set UCC mac addresses - CONFIG_OF_HAS_BD_T - - * CONFIG_OF_LIBFDT - enables the "fdt bd_t" command - * CONFIG_OF_FLAT_TREE - The resulting flat device tree - will have a copy of the bd_t. Space should be - pre-allocated in the dts for the bd_t. - - CONFIG_OF_HAS_UBOOT_ENV - - * CONFIG_OF_LIBFDT - enables the "fdt env" command - * CONFIG_OF_FLAT_TREE - The resulting flat device tree - will have a copy of u-boot's environment variables - CONFIG_OF_BOARD_SETUP Board code has addition modification that it wants to make @@ -633,7 +623,6 @@ The following options need to be configured: CONFIG_CMD_SPI * SPI serial bus support CONFIG_CMD_USB * USB support CONFIG_CMD_VFD * VFD support (TRAB) - CONFIG_CMD_BSP * Board SPecific functions CONFIG_CMD_CDP * Cisco Discover Protocol support CONFIG_CMD_FSL * Microblaze FSL support @@ -682,6 +671,7 @@ The following options need to be configured: CONFIG_RTC_MPC8xx - use internal RTC of MPC8xx CONFIG_RTC_PCF8563 - use Philips PCF8563 RTC + CONFIG_RTC_MC13783 - use MC13783 RTC CONFIG_RTC_MC146818 - use MC146818 RTC CONFIG_RTC_DS1307 - use Maxim, Inc. DS1307 RTC CONFIG_RTC_DS1337 - use Maxim, Inc. DS1337 RTC @@ -751,6 +741,9 @@ The following options need to be configured: CONFIG_E1000 Support for Intel 8254x gigabit chips. + CONFIG_E1000_FALLBACK_MAC + default MAC for empty eeprom after production. + CONFIG_EEPRO100 Support for Intel 82557/82559/82559ER chips. Optional CONFIG_EEPRO100_SROM_WRITE enables eeprom @@ -1151,6 +1144,20 @@ The following options need to be configured: of the "hostname" environment variable is passed as option 12 to the DHCP server. + CONFIG_BOOTP_DHCP_REQUEST_DELAY + + A 32bit value in microseconds for a delay between + receiving a "DHCP Offer" and sending the "DHCP Request". + This fixes a problem with certain DHCP servers that don't + respond 100% of the time to a "DHCP request". E.g. On an + AT91RM9200 processor running at 180MHz, this delay needed + to be *at least* 15,000 usec before a Windows Server 2003 + DHCP server would reply 100% of the time. I recommend at + least 50,000 usec to be safe. The alternative is to hope + that one of the retries will be successful but note that + the DHCP timeout and retry process takes a longer than + this delay. + - CDP Options: CONFIG_CDP_DEVICE_ID @@ -1407,6 +1414,11 @@ The following options need to be configured: Currently supported on some MPC8xxx processors. For an example, see include/configs/mpc8349emds.h. + CONFIG_MXC_SPI + + Enables the driver for the SPI controllers on i.MX and MXC + SoCs. Currently only i.MX31 is supported. + - FPGA Support: CONFIG_FPGA Enables FPGA subsystem. @@ -1548,6 +1560,10 @@ The following options need to be configured: before giving up the operation. If not defined, a default value of 5 is used. + CONFIG_ARP_TIMEOUT + + Timeout waiting for an ARP reply in milliseconds. + - Command Interpreter: CONFIG_AUTO_COMPLETE @@ -1990,8 +2006,11 @@ Configuration Settings: - CFG_BOOTMAPSZ: Maximum size of memory mapped by the startup code of the Linux kernel; all data that must be processed by - the Linux kernel (bd_info, boot arguments, eventually - initrd image) must be put below this limit. + the Linux kernel (bd_info, boot arguments, FDT blob if + used) must be put below this limit, unless "bootm_low" + enviroment variable is defined and non-zero. In such case + all data for the Linux kernel must be between "bootm_low" + and "bootm_low" + CFG_BOOTMAPSZ. - CFG_MAX_FLASH_BANKS: Max number of Flash memory banks @@ -2036,6 +2055,13 @@ Configuration Settings: This option also enables the building of the cfi_flash driver in the drivers directory +- CFG_FLASH_USE_BUFFER_WRITE + Use buffered writes to flash. + +- CONFIG_FLASH_SPANSION_S29WS_N + s29ws-n MirrorBit flash has non-standard addresses for buffered + write commands. + - CFG_FLASH_QUIET_TEST If this option is defined, the common CFI flash doesn't print it's warning upon not recognized FLASH banks. This @@ -2729,6 +2755,20 @@ Some configuration options can be set using Environment Variables: bootfile - Name of the image to load with TFTP + bootm_low - Memory range available for image processing in the bootm + command can be restricted. This variable is given as + a hexadecimal number and defines lowest address allowed + for use by the bootm command. See also "bootm_size" + environment variable. Address defined by "bootm_low" is + also the base of the initial memory mapping for the Linux + kernel -- see the descripton of CFG_BOOTMAPSZ. + + bootm_size - Memory range available for image processing in the bootm + command can be restricted. This variable is given as + a hexadecimal number and defines the size of the region + allowed for use by the bootm command. See also "bootm_low" + environment variable. + autoload - if set to "no" (any string beginning with 'n'), "bootp" will just load perform a lookup of the configuration from the BOOTP server, but not try to