X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=README;h=f39accfe5307ca7f1f94dbd8c6a8e13486f2604e;hb=b545a98f5dc5635d55b5b3878cbb44142e863017;hp=00127a75ef76854d01062c90800c1c7cb7be7026;hpb=f71cbfe3ca5d2ad20159871700e8e248c8818ba8;p=u-boot

diff --git a/README b/README
index 00127a75ef..f39accfe53 100644
--- a/README
+++ b/README
@@ -567,6 +567,7 @@ The following options need to be configured:
 		CONFIG_ARM_ERRATA_743622
 		CONFIG_ARM_ERRATA_751472
 		CONFIG_ARM_ERRATA_794072
+		CONFIG_ARM_ERRATA_761320
 
 		If set, the workarounds for these ARM errata are applied early
 		during U-Boot startup. Note that these options force the
@@ -1013,7 +1014,7 @@ The following options need to be configured:
 		CONFIG_CMD_CDP		* Cisco Discover Protocol support
 		CONFIG_CMD_MFSL		* Microblaze FSL support
 		CONFIG_CMD_XIMG		  Load part of Multi Image
-
+		CONFIG_CMD_UUID		* Generate random UUID or GUID string
 
 		EXAMPLE: If you want all functions except of network
 		support you can write:
@@ -1526,6 +1527,16 @@ The following options need to be configured:
 		this to the maximum filesize (in bytes) for the buffer.
 		Default is 4 MiB if undefined.
 
+		DFU_DEFAULT_POLL_TIMEOUT
+		Poll timeout [ms], is the timeout a device can send to the
+		host. The host must wait for this timeout before sending
+		a subsequent DFU_GET_STATUS request to the device.
+
+		DFU_MANIFEST_POLL_TIMEOUT
+		Poll timeout [ms], which the device sends to the host when
+		entering dfuMANIFEST state. Host waits this timeout, before
+		sending again an USB request to the device.
+
 - Journaling Flash filesystem support:
 		CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE,
 		CONFIG_JFFS2_NAND_DEV
@@ -3243,6 +3254,10 @@ FIT uImage format:
 		supports MMC, NAND and YMODEM loading of U-Boot and NAND
 		NAND loading of the Linux Kernel.
 
+		CONFIG_SPL_OS_BOOT
+		Enable booting directly to an OS from SPL.
+		See also: doc/README.falcon
+
 		CONFIG_SPL_DISPLAY_PRINT
 		For ARM, enable an optional function to print more information
 		about the running system.
@@ -3315,6 +3330,10 @@ FIT uImage format:
 		Support for NAND boot using simple NAND drivers that
 		expose the cmd_ctrl() interface.
 
+		CONFIG_SPL_MTD_SUPPORT
+		Support for the MTD subsystem within SPL.  Useful for
+		environment on NAND support within SPL.
+
 		CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 		Set for the SPL on PPC mpc8xxx targets, support for
 		drivers/ddr/fsl/libddr.o in SPL binary.