X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=README;h=f39accfe5307ca7f1f94dbd8c6a8e13486f2604e;hb=b545a98f5dc5635d55b5b3878cbb44142e863017;hp=f51f17ec693f2ae01387df144c64361d9710b7a6;hpb=6b1e1254f326940e5b65c7029f71b964bdf28fd4;p=u-boot

diff --git a/README b/README
index f51f17ec69..f39accfe53 100644
--- a/README
+++ b/README
@@ -566,6 +566,8 @@ The following options need to be configured:
 		CONFIG_ARM_ERRATA_742230
 		CONFIG_ARM_ERRATA_743622
 		CONFIG_ARM_ERRATA_751472
+		CONFIG_ARM_ERRATA_794072
+		CONFIG_ARM_ERRATA_761320
 
 		If set, the workarounds for these ARM errata are applied early
 		during U-Boot startup. Note that these options force the
@@ -1012,7 +1014,7 @@ The following options need to be configured:
 		CONFIG_CMD_CDP		* Cisco Discover Protocol support
 		CONFIG_CMD_MFSL		* Microblaze FSL support
 		CONFIG_CMD_XIMG		  Load part of Multi Image
-
+		CONFIG_CMD_UUID		* Generate random UUID or GUID string
 
 		EXAMPLE: If you want all functions except of network
 		support you can write:
@@ -1525,6 +1527,16 @@ The following options need to be configured:
 		this to the maximum filesize (in bytes) for the buffer.
 		Default is 4 MiB if undefined.
 
+		DFU_DEFAULT_POLL_TIMEOUT
+		Poll timeout [ms], is the timeout a device can send to the
+		host. The host must wait for this timeout before sending
+		a subsequent DFU_GET_STATUS request to the device.
+
+		DFU_MANIFEST_POLL_TIMEOUT
+		Poll timeout [ms], which the device sends to the host when
+		entering dfuMANIFEST state. Host waits this timeout, before
+		sending again an USB request to the device.
+
 - Journaling Flash filesystem support:
 		CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE,
 		CONFIG_JFFS2_NAND_DEV
@@ -1741,7 +1753,7 @@ CBFS (Coreboot Filesystem) support
 
 		If this option is set, then U-Boot will prevent the environment
 		variable "splashimage" from being set to a problematic address
-		(see README.displaying-bmps and README.arm-unaligned-accesses).
+		(see README.displaying-bmps).
 		This option is useful for targets where, due to alignment
 		restrictions, an improperly aligned BMP image will cause a data
 		abort. If you think you will not have problems with unaligned
@@ -3242,6 +3254,10 @@ FIT uImage format:
 		supports MMC, NAND and YMODEM loading of U-Boot and NAND
 		NAND loading of the Linux Kernel.
 
+		CONFIG_SPL_OS_BOOT
+		Enable booting directly to an OS from SPL.
+		See also: doc/README.falcon
+
 		CONFIG_SPL_DISPLAY_PRINT
 		For ARM, enable an optional function to print more information
 		about the running system.
@@ -3314,6 +3330,10 @@ FIT uImage format:
 		Support for NAND boot using simple NAND drivers that
 		expose the cmd_ctrl() interface.
 
+		CONFIG_SPL_MTD_SUPPORT
+		Support for the MTD subsystem within SPL.  Useful for
+		environment on NAND support within SPL.
+
 		CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 		Set for the SPL on PPC mpc8xxx targets, support for
 		drivers/ddr/fsl/libddr.o in SPL binary.
@@ -3470,6 +3490,9 @@ typically in board_init_f() and board_init_r().
 Configuration Settings:
 -----------------------
 
+- CONFIG_SYS_SUPPORT_64BIT_DATA: Defined automatically if compiled as 64-bit.
+		Optionally it can be defined to support 64-bit memory commands.
+
 - CONFIG_SYS_LONGHELP: Defined when you want long help messages included;
 		undefine this when you're short of memory.
 
@@ -3742,12 +3765,6 @@ Configuration Settings:
 	its config.mk file). If you find problems enabling this option on
 	your board please report the problem and send patches!
 
-- CONFIG_SYS_SYM_OFFSETS
-	This is set by architectures that use offsets for link symbols
-	instead of absolute values. So bss_start is obtained using an
-	offset _bss_start_ofs from CONFIG_SYS_TEXT_BASE, rather than
-	directly. You should not need to touch this setting.
-
 - CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC (OMAP only)
 	This is set by OMAP boards for the max time that reset should
 	be asserted. See doc/README.omap-reset-time for details on how