X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=arch%2Farm%2Fcpu%2Farm926ejs%2Fmxs%2Fspl_mem_init.c;h=a744e5d4990a9c4776080293781393257df4bac5;hb=c8381bf435ddb104594df00411a8ebd049dd753c;hp=07db27927f47aaaa22b9cb9e72eb272d953b91c1;hpb=ec7023db8dc95966919589541f1ca09355a3f7a5;p=u-boot

diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
index 07db27927f..a744e5d499 100644
--- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
+++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
@@ -4,23 +4,7 @@
  * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
  * on behalf of DENX Software Engineering GmbH
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #include <common.h>
@@ -108,6 +92,7 @@ static uint32_t dram_vals[] = {
 
 __weak void mxs_adjust_memory_params(uint32_t *dram_vals)
 {
+	debug("SPL: Using default SDRAM parameters\n");
 }
 
 #ifdef CONFIG_MX28
@@ -115,8 +100,10 @@ static void initialize_dram_values(void)
 {
 	int i;
 
+	debug("SPL: Setting mx28 board specific SDRAM parameters\n");
 	mxs_adjust_memory_params(dram_vals);
 
+	debug("SPL: Applying SDRAM parameters\n");
 	for (i = 0; i < ARRAY_SIZE(dram_vals); i++)
 		writel(dram_vals[i], MXS_DRAM_BASE + (4 * i));
 }
@@ -125,6 +112,7 @@ static void initialize_dram_values(void)
 {
 	int i;
 
+	debug("SPL: Setting mx23 board specific SDRAM parameters\n");
 	mxs_adjust_memory_params(dram_vals);
 
 	/*
@@ -136,6 +124,7 @@ static void initialize_dram_values(void)
 	 * HW_DRAM_CTL8 is setup as the last element.
 	 * So skip the initialization of these HW_DRAM_CTL registers.
 	 */
+	debug("SPL: Applying SDRAM parameters\n");
 	for (i = 0; i < ARRAY_SIZE(dram_vals); i++) {
 		if (i == 8 || i == 27 || i == 28 || i == 35)
 			continue;
@@ -162,6 +151,8 @@ static void mxs_mem_init_clock(void)
 	const unsigned char divider = 21;
 #endif
 
+	debug("SPL: Initialising FRAC0\n");
+
 	/* Gate EMI clock */
 	writeb(CLKCTRL_FRAC_CLKGATE,
 		&clkctrl_regs->hw_clkctrl_frac0_set[CLKCTRL_FRAC0_EMI]);
@@ -186,6 +177,7 @@ static void mxs_mem_init_clock(void)
 		&clkctrl_regs->hw_clkctrl_clkseq_clr);
 
 	early_delay(10000);
+	debug("SPL: FRAC0 Initialised\n");
 }
 
 static void mxs_mem_setup_cpu_and_hbus(void)
@@ -193,6 +185,8 @@ static void mxs_mem_setup_cpu_and_hbus(void)
 	struct mxs_clkctrl_regs *clkctrl_regs =
 		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
 
+	debug("SPL: Setting CPU and HBUS clock frequencies\n");
+
 	/* Set fractional divider for ref_cpu to 480 * 18 / 19 = 454MHz
 	 * and ungate CPU clock */
 	writeb(19 & CLKCTRL_FRAC_FRAC_MASK,
@@ -225,6 +219,8 @@ static void mxs_mem_setup_vdda(void)
 	struct mxs_power_regs *power_regs =
 		(struct mxs_power_regs *)MXS_POWER_BASE;
 
+	debug("SPL: Configuring VDDA\n");
+
 	writel((0xc << POWER_VDDACTRL_TRG_OFFSET) |
 		(0x7 << POWER_VDDACTRL_BO_OFFSET_OFFSET) |
 		POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW,
@@ -256,13 +252,22 @@ static void mx23_mem_setup_vddmem(void)
 	struct mxs_power_regs *power_regs =
 		(struct mxs_power_regs *)MXS_POWER_BASE;
 
+	debug("SPL: Setting mx23 VDDMEM\n");
+
+	/* We must wait before and after disabling the current limiter! */
+	early_delay(10000);
+
 	clrbits_le32(&power_regs->hw_power_vddmemctrl,
 		POWER_VDDMEMCTRL_ENABLE_ILIMIT);
 
+	early_delay(10000);
+
 }
 
 static void mx23_mem_init(void)
 {
+	debug("SPL: Initialising mx23 SDRAM Controller\n");
+
 	/*
 	 * Reset/ungate the EMI block. This is essential, otherwise the system
 	 * suffers from memory instability. This thing is mx23 specific and is
@@ -285,7 +290,13 @@ static void mx23_mem_init(void)
 	setbits_le32(MXS_DRAM_BASE + 0x20, 1 << 16);
 
 	clrbits_le32(MXS_DRAM_BASE + 0x40, 1 << 17);
-	early_delay(20000);
+
+	/* Wait for EMI_STAT bit DRAM_HALTED */
+	for (;;) {
+		if (!(readl(MXS_EMI_BASE + 0x10) & (1 << 1)))
+			break;
+		early_delay(1000);
+	}
 
 	/* Adjust EMI port priority. */
 	clrsetbits_le32(0x80020000, 0x1f << 16, 0x2);
@@ -302,6 +313,8 @@ static void mx28_mem_init(void)
 	struct mxs_pinctrl_regs *pinctrl_regs =
 		(struct mxs_pinctrl_regs *)MXS_PINCTRL_BASE;
 
+	debug("SPL: Initialising mx28 SDRAM Controller\n");
+
 	/* Set DDR2 mode */
 	writel(PINCTRL_EMI_DS_CTRL_DDR_MODE_DDR2,
 		&pinctrl_regs->hw_pinctrl_emi_ds_ctrl_set);