X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=arch%2Farm%2Fcpu%2Farmv8%2Ffsl-layerscape%2FKconfig;h=2562f4a365188d5eab115902d1ac31605b680674;hb=fb806ad61f8ff10f3abb14dfadfe0f8989665445;hp=17b470dbd4ec01d852fe6005ff858023e699b56a;hpb=2c2e2c9e14462a34bb99ba281c7445c3174a0fe6;p=u-boot diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 17b470dbd4..2562f4a365 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -1,42 +1,88 @@ config ARCH_LS1012A bool + select ARMV8_SET_SMPEN select FSL_LSCH2 select SYS_FSL_DDR_BE select SYS_FSL_MMDC select SYS_FSL_ERRATUM_A010315 + select ARCH_EARLY_INIT_R + select BOARD_EARLY_INIT_F config ARCH_LS1043A bool + select ARMV8_SET_SMPEN select FSL_LSCH2 + select SYS_FSL_DDR select SYS_FSL_DDR_BE select SYS_FSL_DDR_VER_50 + select SYS_FSL_ERRATUM_A008850 + select SYS_FSL_ERRATUM_A009660 + select SYS_FSL_ERRATUM_A009663 + select SYS_FSL_ERRATUM_A009929 + select SYS_FSL_ERRATUM_A009942 select SYS_FSL_ERRATUM_A010315 select SYS_FSL_ERRATUM_A010539 + select SYS_FSL_HAS_DDR3 + select SYS_FSL_HAS_DDR4 + select ARCH_EARLY_INIT_R + select BOARD_EARLY_INIT_F config ARCH_LS1046A bool + select ARMV8_SET_SMPEN select FSL_LSCH2 + select SYS_FSL_DDR select SYS_FSL_DDR_BE - select SYS_FSL_DDR4 select SYS_FSL_DDR_VER_50 + select SYS_FSL_ERRATUM_A008336 + select SYS_FSL_ERRATUM_A008511 + select SYS_FSL_ERRATUM_A008850 + select SYS_FSL_ERRATUM_A009801 + select SYS_FSL_ERRATUM_A009803 + select SYS_FSL_ERRATUM_A009942 + select SYS_FSL_ERRATUM_A010165 select SYS_FSL_ERRATUM_A010539 + select SYS_FSL_HAS_DDR4 select SYS_FSL_SRDS_2 + select ARCH_EARLY_INIT_R + select BOARD_EARLY_INIT_F config ARCH_LS2080A bool + select ARMV8_SET_SMPEN + select ARM_ERRATA_826974 + select ARM_ERRATA_828024 + select ARM_ERRATA_829520 + select ARM_ERRATA_833471 select FSL_LSCH3 - select SYS_FSL_DDR4 + select SYS_FSL_DDR select SYS_FSL_DDR_LE select SYS_FSL_DDR_VER_50 select SYS_FSL_HAS_DP_DDR select SYS_FSL_HAS_SEC + select SYS_FSL_HAS_DDR4 select SYS_FSL_SEC_COMPAT_5 + select SYS_FSL_SEC_LE select SYS_FSL_SRDS_2 + select SYS_FSL_ERRATUM_A008336 + select SYS_FSL_ERRATUM_A008511 + select SYS_FSL_ERRATUM_A008514 + select SYS_FSL_ERRATUM_A008585 + select SYS_FSL_ERRATUM_A009635 + select SYS_FSL_ERRATUM_A009663 + select SYS_FSL_ERRATUM_A009801 + select SYS_FSL_ERRATUM_A009803 + select SYS_FSL_ERRATUM_A009942 + select SYS_FSL_ERRATUM_A010165 + select SYS_FSL_ERRATUM_A009203 + select ARCH_EARLY_INIT_R + select BOARD_EARLY_INIT_F config FSL_LSCH2 bool select SYS_FSL_HAS_SEC select SYS_FSL_SEC_COMPAT_5 + select SYS_FSL_SEC_BE select SYS_FSL_SRDS_1 select SYS_HAS_SERDES @@ -45,32 +91,102 @@ config FSL_LSCH3 select SYS_FSL_SRDS_1 select SYS_HAS_SERDES +config FSL_MC_ENET + bool "Management Complex network" + depends on ARCH_LS2080A + default y + select RESV_RAM + help + Enable Management Complex (MC) network + menu "Layerscape architecture" depends on FSL_LSCH2 || FSL_LSCH3 +config FSL_PCIE_COMPAT + string "PCIe compatible of Kernel DT" + depends on PCIE_LAYERSCAPE + default "fsl,ls1012a-pcie" if ARCH_LS1012A + default "fsl,ls1043a-pcie" if ARCH_LS1043A + default "fsl,ls1046a-pcie" if ARCH_LS1046A + default "fsl,ls2080a-pcie" if ARCH_LS2080A + help + This compatible is used to find pci controller node in Kernel DT + to complete fixup. + +config HAS_FEATURE_GIC64K_ALIGN + bool + default y if ARCH_LS1043A + +config HAS_FEATURE_ENHANCED_MSI + bool + default y if ARCH_LS1043A + menu "Layerscape PPA" config FSL_LS_PPA bool "FSL Layerscape PPA firmware support" depends on !ARMV8_PSCI - depends on ARCH_LS1043A || ARCH_LS1046A - select FSL_PPA_ARMV8_PSCI + select ARMV8_SEC_FIRMWARE_SUPPORT + select SEC_FIRMWARE_ARMV8_PSCI + select ARMV8_SEC_FIRMWARE_ERET_ADDR_REVERT if FSL_LSCH2 help The FSL Primary Protected Application (PPA) is a software component which is loaded during boot stage, and then remains resident in RAM and runs in the TrustZone after boot. Say y to enable it. +choice + prompt "FSL Layerscape PPA firmware loading-media select" + depends on FSL_LS_PPA + default SYS_LS_PPA_FW_IN_MMC if SD_BOOT + default SYS_LS_PPA_FW_IN_NAND if NAND_BOOT + default SYS_LS_PPA_FW_IN_XIP + +config SYS_LS_PPA_FW_IN_XIP + bool "XIP" + help + Say Y here if the PPA firmware locate at XIP flash, such + as NOR or QSPI flash. + +config SYS_LS_PPA_FW_IN_MMC + bool "eMMC or SD Card" + help + Say Y here if the PPA firmware locate at eMMC/SD card. + +config SYS_LS_PPA_FW_IN_NAND + bool "NAND" + help + Say Y here if the PPA firmware locate at NAND flash. + +endchoice -config FSL_PPA_ARMV8_PSCI - bool "PSCI implementation in PPA firmware" +config SYS_LS_PPA_FW_ADDR + hex "Address of PPA firmware loading from" depends on FSL_LS_PPA + default 0x40500000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT + default 0x580a00000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A + default 0x60500000 if SYS_LS_PPA_FW_IN_XIP + default 0x500000 if SYS_LS_PPA_FW_IN_MMC + default 0x500000 if SYS_LS_PPA_FW_IN_NAND + help - This config enables the ARMv8 PSCI implementation in PPA firmware. - This is a private PSCI implementation and different from those - implemented under the common ARMv8 PSCI framework. -endmenu + If the PPA firmware locate at XIP flash, such as NOR or + QSPI flash, this address is a directly memory-mapped. + If it is in a serial accessed flash, such as NAND and SD + card, it is a byte offset. -config SYS_FSL_MMDC - bool +config SYS_LS_PPA_ESBC_ADDR + hex "hdr address of PPA firmware loading from" + depends on FSL_LS_PPA && CHAIN_OF_TRUST + default 0x600c0000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A + default 0x40740000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A + default 0x40480000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1012A + default 0x580c40000 if SYS_LS_PPA_FW_IN_XIP && FSL_LSCH3 + help + If the PPA header firmware locate at XIP flash, such as NOR or + QSPI flash, this address is a directly memory-mapped. + If it is in a serial accessed flash, such as NAND and SD + card, it is a byte offset. + +endmenu config SYS_FSL_ERRATUM_A010315 bool "Workaround for PCIe erratum A010315" @@ -91,13 +207,8 @@ config MAX_CPUS cores, count the reserved ports. This will allocate enough memory in spin table to properly handle all cores. -config NUM_DDR_CONTROLLERS - int "Maximum DDR controllers" - default 3 if ARCH_LS2080A - default 1 - config SECURE_BOOT - bool + bool "Secure Boot" help Enable Freescale Secure Boot feature @@ -127,49 +238,123 @@ config SYS_FSL_SRDS_2 config SYS_HAS_SERDES bool -config SYS_FSL_DDR - bool "Freescale DDR driver" +endmenu + +menu "Layerscape clock tree configuration" + depends on FSL_LSCH2 || FSL_LSCH3 + +config SYS_FSL_CLK + bool "Enable clock tree initialization" + default y + +config CLUSTER_CLK_FREQ + int "Reference clock of core cluster" + depends on ARCH_LS1012A + default 100000000 help - Select Freescale General DDR driver, shared between most Freescale - PowerPC- based SoCs (such as mpc83xx, mpc85xx, mpc86xx) and ARM- - based Layerscape SoCs (such as ls2080a). + This number is the reference clock frequency of core PLL. + For most platforms, the core PLL and Platform PLL have the same + reference clock, but for some platforms, LS1012A for instance, + they are provided sepatately. -config SYS_FSL_DDR_BE - bool +config SYS_FSL_PCLK_DIV + int "Platform clock divider" + default 1 if ARCH_LS1043A + default 1 if ARCH_LS1046A + default 2 + help + This is the divider that is used to derive Platform clock from + Platform PLL, in another word: + Platform_clk = Platform_PLL_freq / this_divider + +config SYS_FSL_DSPI_CLK_DIV + int "DSPI clock divider" + default 1 if ARCH_LS1043A + default 2 + help + This is the divider that is used to derive DSPI clock from Platform + PLL, in another word DSPI_clk = Platform_PLL_freq / this_divider. + +config SYS_FSL_DUART_CLK_DIV + int "DUART clock divider" + default 1 if ARCH_LS1043A + default 2 + help + This is the divider that is used to derive DUART clock from Platform + clock, in another word DUART_clk = Platform_clk / this_divider. + +config SYS_FSL_I2C_CLK_DIV + int "I2C clock divider" + default 1 if ARCH_LS1043A + default 2 + help + This is the divider that is used to derive I2C clock from Platform + clock, in another word I2C_clk = Platform_clk / this_divider. + +config SYS_FSL_IFC_CLK_DIV + int "IFC clock divider" + default 1 if ARCH_LS1043A + default 2 + help + This is the divider that is used to derive IFC clock from Platform + clock, in another word IFC_clk = Platform_clk / this_divider. + +config SYS_FSL_LPUART_CLK_DIV + int "LPUART clock divider" + default 1 if ARCH_LS1043A + default 2 + help + This is the divider that is used to derive LPUART clock from Platform + clock, in another word LPUART_clk = Platform_clk / this_divider. + +config SYS_FSL_SDHC_CLK_DIV + int "SDHC clock divider" + default 1 if ARCH_LS1043A + default 1 if ARCH_LS1012A + default 2 help - Access DDR registers in big-endian. + This is the divider that is used to derive SDHC clock from Platform + clock, in another word SDHC_clk = Platform_clk / this_divider. +endmenu -config SYS_FSL_DDR_LE +config RESV_RAM bool help - Access DDR registers in little-endian. + Reserve memory from the top, tracked by gd->arch.resv_ram. This + reserved RAM can be used by special driver that resides in memory + after U-Boot exits. It's up to implementation to allocate and allow + access to this reserved memory. For example, the reserved RAM can + be at the high end of physical memory. The reserve RAM may be + excluded from memory bank(s) passed to OS, or marked as reserved. -config SYS_FSL_DDR_VER - int - default 50 if SYS_FSL_DDR_VER_50 +config SYS_FSL_ERRATUM_A008336 + bool -config SYS_FSL_DDR_VER_50 +config SYS_FSL_ERRATUM_A008514 bool -config SYS_FSL_DDRC_ARM_GEN3 +config SYS_FSL_ERRATUM_A008585 bool -config SYS_FSL_DDRC_GEN4 +config SYS_FSL_ERRATUM_A008850 bool -config SYS_FSL_DDR3 - bool "Freescale DDR3 controller" - depends on !SYS_FSL_DDR4 - select SYS_FSL_DDR - select SYS_FSL_DDRC_ARM_GEN3 - help - Enable Freescale DDR3 controller on ARM-based SoCs. +config SYS_FSL_ERRATUM_A009203 + bool -config SYS_FSL_DDR4 - bool "Freescale DDR4 controller" - select SYS_FSL_DDR - select SYS_FSL_DDRC_GEN4 - help - Enable Freescale DDR4 controller. +config SYS_FSL_ERRATUM_A009635 + bool -endmenu +config SYS_FSL_ERRATUM_A009660 + bool + +config SYS_FSL_ERRATUM_A009929 + bool + +config SYS_MC_RSV_MEM_ALIGN + hex "Management Complex reserved memory alignment" + depends on RESV_RAM + default 0x20000000 + help + Reserved memory needs to be aligned for MC to use. Default value + is 512MB.