X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=arch%2Farm%2Fcpu%2Fixp%2Fstart.S;h=a305ff5e0ae4ea47b1fc9a7ec06125c3cb8ab447;hb=7086e91b0e9930139e703c8f9f857b52baf2bef4;hp=c12f1a7db8a5bb99c78ccaaf7f7ef4bd53245704;hpb=198166877768cf4d0197289a524df8a6ca0e2f19;p=u-boot

diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S
index c12f1a7db8..a305ff5e0a 100644
--- a/arch/arm/cpu/ixp/start.S
+++ b/arch/arm/cpu/ixp/start.S
@@ -98,7 +98,11 @@ _fiq:			.word fiq
 
 .globl _TEXT_BASE
 _TEXT_BASE:
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
+	.word	CONFIG_SPL_TEXT_BASE
+#else
 	.word	CONFIG_SYS_TEXT_BASE
+#endif
 
 /*
  * These are defined in the board-specific linker script.
@@ -110,9 +114,13 @@ _TEXT_BASE:
 _bss_start_ofs:
 	.word __bss_start - _start
 
+.globl _image_copy_end_ofs
+_image_copy_end_ofs:
+	.word __image_copy_end - _start
+
 .globl _bss_end_ofs
 _bss_end_ofs:
-	.word __bss_end__ - _start
+	.word __bss_end - _start
 
 .globl _end_ofs
 _end_ofs:
@@ -245,21 +253,14 @@ reset:
 	orr	r0,r0,#0x13
 	msr	cpsr,r0
 
-/* Set initial stackpointer in SDRAM to call board_init_f */
-call_board_init_f:
-	ldr	sp, =(CONFIG_SYS_INIT_SP_ADDR)
-	bic	sp, sp, #7 /* 8-byte alignment for ABI compliance */
-	ldr	r0,=0x00000000
-	bl	board_init_f
+	bl	_main
 
 /*------------------------------------------------------------------------------*/
 
 /*
  * void relocate_code (addr_sp, gd, addr_moni)
  *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
+ * This function relocates the monitor code.
  */
 	.globl	relocate_code
 relocate_code:
@@ -267,21 +268,16 @@ relocate_code:
 	mov	r5, r1	/* save addr of gd */
 	mov	r6, r2	/* save addr of destination */
 
-	/* Set up the stack						    */
-stack_setup:
-	mov	sp, r4
-
 	adr	r0, _start
-	cmp	r0, r6
-	moveq	r9, #0		/* no relocation. relocation offset(r9) = 0 */
-	beq	clear_bss		/* skip relocation */
+	subs	r9, r6, r0		/* r9 <- relocation offset */
+	beq	relocate_done		/* skip relocation */
 	mov	r1, r6			/* r1 <- scratch for copy_loop */
-	ldr	r3, _bss_start_ofs
+	ldr	r3, _image_copy_end_ofs
 	add	r2, r0, r3		/* r2 <- source end address	    */
 
 copy_loop:
-	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
+	ldmia	r0!, {r10-r11}		/* copy from source address [r0]    */
+	stmia	r1!, {r10-r11}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
 	blo	copy_loop
 
@@ -290,7 +286,6 @@ copy_loop:
 	 * fix .rel.dyn relocations
 	 */
 	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r6, r0		/* r9 <- relocation offset */
 	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
 	add	r10, r10, r0		/* r10 <- sym table in FLASH */
 	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
@@ -326,42 +321,9 @@ fixnext:
 	blo	fixloop
 #endif
 
-clear_bss:
-#ifndef CONFIG_SPL_BUILD
-	ldr	r0, _bss_start_ofs
-	ldr	r1, _bss_end_ofs
-	mov	r4, r6			/* reloc addr */
-	add	r0, r0, r4
-	add	r1, r1, r4
-	mov	r2, #0x00000000		/* clear			    */
-
-clbss_l:cmp	r0, r1			/* clear loop... */
-	bhs	clbss_e			/* if reached end of bss, exit */
-	str	r2, [r0]
-	add	r0, r0, #4
-	b	clbss_l
-clbss_e:
-
-	bl coloured_LED_init
-	bl red_led_on
-#endif
+relocate_done:
 
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-	ldr	r0, _board_init_r_ofs
-	adr	r1, _start
-	add	lr, r0, r1
-	add	lr, lr, r9
-	/* setup parameters for board_init_r */
-	mov	r0, r5		/* gd_t */
-	mov	r1, r6		/* dest_addr */
-	/* jump to it ... */
-	mov	pc, lr
-
-_board_init_r_ofs:
-	.word board_init_r - _start
+	bx	lr
 
 _rel_dyn_start_ofs:
 	.word __rel_dyn_start - _start
@@ -370,6 +332,11 @@ _rel_dyn_end_ofs:
 _dynsym_start_ofs:
 	.word __dynsym_start - _start
 
+	.globl	c_runtime_cpu_setup
+c_runtime_cpu_setup:
+
+	bx	lr
+
 /****************************************************************************/
 /*									    */
 /* Interrupt handling							    */