X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=arch%2Farm%2Fdts%2Fexynos5250-snow.dts;h=29c13c1257e7773fe20c07a42c887b768100a875;hb=9ca7e6720e96e82be1de9ec0ba6bac9f1beeb02f;hp=35912526e71e32640f837fc2cb988f9cd758a419;hpb=59408eb2051d2432533480b6ff0788d323c553a6;p=u-boot

diff --git a/arch/arm/dts/exynos5250-snow.dts b/arch/arm/dts/exynos5250-snow.dts
index 35912526e7..29c13c1257 100644
--- a/arch/arm/dts/exynos5250-snow.dts
+++ b/arch/arm/dts/exynos5250-snow.dts
@@ -95,22 +95,6 @@
 		};
 	};
 
-
-	i2c4: i2c@12CA0000 {
-		cros_ec_old: cros-ec@1e {
-			reg = <0x1e>;
-			compatible = "google,cros-ec-i2c";
-			i2c-max-frequency = <100000>;
-			u-boot,i2c-offset-len = <0>;
-			ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>;
-		};
-
-		power-regulator@48 {
-			compatible = "ti,tps65090";
-			reg = <0x48>;
-		};
-	};
-
 	i2c-arbitrator {
 		compatible = "i2c-arb-gpio-challenge";
 		#address-cells = <1>;
@@ -206,6 +190,45 @@
 		};
 	};
 
+	i2c@12CD0000 {
+		ptn3460: lvds-bridge@20 {
+			compatible = "nxp,ptn3460";
+			reg = <0x20>;
+			sleep-gpios = <&gpy2 5 GPIO_ACTIVE_LOW>;
+			reset-gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
+			hotplug-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+			edid-emulation = <5>;
+
+			ports {
+				port@0 {
+					bridge_out: endpoint {
+						remote-endpoint = <&panel_in>;
+					};
+				};
+
+				port@1 {
+					bridge_in: endpoint {
+						remote-endpoint = <&dp_out>;
+					};
+				};
+			};
+		};
+
+		soundcodec@22 {
+			reg = <0x22>;
+			compatible = "maxim,max98095-codec";
+		};
+	};
+
+	i2c@12C90000 {
+		clock-frequency = <100000>;
+		tpm@20 {
+			reg = <0x20>;
+			u-boot,i2c-offset-len = <0>;
+			compatible = "infineon,slb9635tt";
+		};
+	};
+
 	spi@12d30000 {
 		spi-max-frequency = <50000000>;
 		firmware_storage_spi: flash@0 {
@@ -214,6 +237,27 @@
 		};
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 1000000 0>;
+		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
+		power-supply = <&fet1>;
+	};
+
+	panel: panel {
+		compatible = "auo,b116xw03";
+		power-supply = <&fet6>;
+		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+
 	spi@131b0000 {
 		spi-max-frequency = <1000000>;
 		spi-deactivate-delay = <100>;
@@ -238,26 +282,6 @@
 		status = "disabled";
 	};
 
-	i2c@12CD0000 {
-		soundcodec@22 {
-			reg = <0x22>;
-			compatible = "maxim,max98095-codec";
-		};
-
-		ptn3460-bridge@20 {
-			compatible = "nxp,ptn3460";
-			reg = <0x20>;
-			/*
-			 * TODO(sjg@chromium.org): Use GPIOs here
-			 * powerdown-gpio = <&gpy2 5 0>;
-			 * reset-gpio = <&gpx1 5 0>;
-			 * edid-emulation = <5>;
-			 * pinctrl-names = "default";
-			 * pinctrl-0 = <&ptn3460_gpios>;
-			 */
-		};
-	};
-
 	i2c@12C60000 {
 		max77686@09 {
 			reg = <0x9>;
@@ -348,6 +372,15 @@
 		samsung,dynamic-range = <0>;
 		samsung,ycbcr-coeff = <0>;
 		samsung,color-depth = <1>;
+		samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			port@0 {
+				dp_out: endpoint {
+					remote-endpoint = <&bridge_in>;
+				};
+			};
+		};
 	};
 
 };