X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=arch%2Farm%2Fdts%2Fzynq-7000.dtsi;h=b618a3f484f0e507948bdff1017cc01ec40a4e26;hb=dc557e9a1fe00ca9d884bd88feef5bebf23fede4;hp=a8bbe487546577acc5d7c520258ada83df057f6e;hpb=08305feb8e0448ed86611cf8a593f65c00724945;p=u-boot

diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi
index a8bbe48754..b618a3f484 100644
--- a/arch/arm/dts/zynq-7000.dtsi
+++ b/arch/arm/dts/zynq-7000.dtsi
@@ -2,7 +2,7 @@
  * Xilinx Zynq 7000 DTSI
  * Describes the hardware common to all Zynq 7000-based boards.
  *
- * Copyright (C) 2013 Xilinx, Inc.
+ *  Copyright (C) 2011 - 2015 Xilinx
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -53,7 +53,8 @@
 		regulator-always-on;
 	};
 
-	amba {
+	amba: amba {
+		u-boot,dm-pre-reloc;
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -95,8 +96,10 @@
 		gpio0: gpio@e000a000 {
 			compatible = "xlnx,zynq-gpio-1.0";
 			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
 			clocks = <&clkc 42>;
 			gpio-controller;
+			interrupt-controller;
 			interrupt-parent = <&intc>;
 			interrupts = <0 20 4>;
 			reg = <0xe000a000 0x1000>;
@@ -127,7 +130,6 @@
 		intc: interrupt-controller@f8f01000 {
 			compatible = "arm,cortex-a9-gic";
 			#interrupt-cells = <3>;
-			#address-cells = <1>;
 			interrupt-controller;
 			reg = <0xF8F01000 0x1000>,
 			      <0xF8F00100 0x100>;
@@ -136,6 +138,7 @@
 		L2: cache-controller@f8f02000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xF8F02000 0x1000>;
+			interrupts = <0 2 4>;
 			arm,data-latency = <3 2 2>;
 			arm,tag-latency = <2 2 2>;
 			cache-unified;
@@ -191,22 +194,38 @@
 			#size-cells = <0>;
 		};
 
+		qspi: spi@e000d000 {
+			clock-names = "ref_clk", "pclk";
+			clocks = <&clkc 10>, <&clkc 43>;
+			compatible = "xlnx,zynq-qspi-1.0";
+			status = "disabled";
+			interrupt-parent = <&intc>;
+			interrupts = <0 19 4>;
+			reg = <0xe000d000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		gem0: ethernet@e000b000 {
-			compatible = "cdns,gem";
+			compatible = "cdns,zynq-gem", "cdns,gem";
 			reg = <0xe000b000 0x1000>;
 			status = "disabled";
 			interrupts = <0 22 4>;
 			clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
 			clock-names = "pclk", "hclk", "tx_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		gem1: ethernet@e000c000 {
-			compatible = "cdns,gem";
+			compatible = "cdns,zynq-gem", "cdns,gem";
 			reg = <0xe000c000 0x1000>;
 			status = "disabled";
 			interrupts = <0 45 4>;
 			clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>;
 			clock-names = "pclk", "hclk", "tx_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		sdhci0: sdhci@e0100000 {
@@ -217,7 +236,7 @@
 			interrupt-parent = <&intc>;
 			interrupts = <0 24 4>;
 			reg = <0xe0100000 0x1000>;
-		} ;
+		};
 
 		sdhci1: sdhci@e0101000 {
 			compatible = "arasan,sdhci-8.9a";
@@ -227,18 +246,17 @@
 			interrupt-parent = <&intc>;
 			interrupts = <0 47 4>;
 			reg = <0xe0101000 0x1000>;
-		} ;
+		};
 
 		slcr: slcr@f8000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "xlnx,zynq-slcr", "syscon";
+			compatible = "xlnx,zynq-slcr", "syscon", "simple-mfd";
 			reg = <0xF8000000 0x1000>;
 			ranges;
 			clkc: clkc@100 {
 				#clock-cells = <1>;
 				compatible = "xlnx,ps7-clkc";
-				ps-clk-frequency = <33333333>;
 				fclk-enable = <0>;
 				clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
 						"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
@@ -253,6 +271,19 @@
 						"dbg_trc", "dbg_apb";
 				reg = <0x100 0x100>;
 			};
+
+			rstc: rstc@200 {
+				compatible = "xlnx,zynq-reset";
+				reg = <0x200 0x48>;
+				#reset-cells = <1>;
+				syscon = <&slcr>;
+			};
+
+			pinctrl0: pinctrl@700 {
+				compatible = "xlnx,pinctrl-zynq";
+				reg = <0x700 0x200>;
+				syscon = <&slcr>;
+			};
 		};
 
 		dmac_s: dmac@f8003000 {
@@ -275,7 +306,12 @@
 
 		devcfg: devcfg@f8007000 {
 			compatible = "xlnx,zynq-devcfg-1.0";
+			interrupt-parent = <&intc>;
+			interrupts = <0 8 4>;
 			reg = <0xf8007000 0x100>;
+			clocks = <&clkc 12>, <&clkc 15>, <&clkc 16>, <&clkc 17>, <&clkc 18>;
+			clock-names = "ref_clk", "fclk0", "fclk1", "fclk2", "fclk3";
+			syscon = <&slcr>;
 		};
 
 		global_timer: timer@f8f00200 {
@@ -288,7 +324,7 @@
 
 		ttc0: timer@f8001000 {
 			interrupt-parent = <&intc>;
-			interrupts = < 0 10 4 0 11 4 0 12 4 >;
+			interrupts = <0 10 4>, <0 11 4>, <0 12 4>;
 			compatible = "cdns,ttc";
 			clocks = <&clkc 6>;
 			reg = <0xF8001000 0x1000>;
@@ -296,7 +332,7 @@
 
 		ttc1: timer@f8002000 {
 			interrupt-parent = <&intc>;
-			interrupts = < 0 37 4 0 38 4 0 39 4 >;
+			interrupts = <0 37 4>, <0 38 4>, <0 39 4>;
 			compatible = "cdns,ttc";
 			clocks = <&clkc 6>;
 			reg = <0xF8002000 0x1000>;
@@ -304,11 +340,11 @@
 
 		scutimer: timer@f8f00600 {
 			interrupt-parent = <&intc>;
-			interrupts = < 1 13 0x301 >;
+			interrupts = <1 13 0x301>;
 			compatible = "arm,cortex-a9-twd-timer";
-			reg = < 0xf8f00600 0x20 >;
+			reg = <0xf8f00600 0x20>;
 			clocks = <&clkc 4>;
-		} ;
+		};
 
 		usb0: usb@e0002000 {
 			compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";