X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=arch%2Farm%2Finclude%2Fasm%2Farch-sunxi%2Fdram_sun8i_h3.h;h=2770986b613f94e60ebbb8408614420a5f899f9e;hb=4f0e44e46615e3c827dcd1ec59677be1058d394c;hp=25d07d9863c92b103b6b7a6dd6ce75810de888d6;hpb=0b8404332ed08799ca0630e4cc868df039f206e3;p=u-boot diff --git a/arch/arm/include/asm/arch-sunxi/dram_sun8i_h3.h b/arch/arm/include/asm/arch-sunxi/dram_sun8i_h3.h index 25d07d9863..2770986b61 100644 --- a/arch/arm/include/asm/arch-sunxi/dram_sun8i_h3.h +++ b/arch/arm/include/asm/arch-sunxi/dram_sun8i_h3.h @@ -15,7 +15,8 @@ struct sunxi_mctl_com_reg { u32 cr; /* 0x00 control register */ - u8 res0[0x8]; /* 0x04 */ + u32 cr_r1; /* 0x04 rank 1 control register (R40 only) */ + u8 res0[0x4]; /* 0x08 */ u32 tmr; /* 0x0c (unused on H3) */ u32 mcr[16][2]; /* 0x10 */ u32 bwcr; /* 0x90 bandwidth control register */ @@ -63,6 +64,17 @@ struct sunxi_mctl_com_reg { #define MCTL_CR_DUAL_RANK (0x1 << 0) #define MCTL_CR_SINGLE_RANK (0x0 << 0) +/* + * CR_R1 is a register found in the R40's DRAM controller. It sets various + * parameters for rank 1. Bits [11:0] have the same meaning as the bits in + * MCTL_CR, but they apply to rank 1 only. This implies we can have + * different chips for rank 1 than rank 0. + * + * As address line A15 and CS1 chip select for rank 1 are muxed on the same + * pin, if single rank is used, A15 must be muxed in. + */ +#define MCTL_CR_R1_MUX_A15 (0x1 << 21) + #define PROTECT_MAGIC (0x94be6fa3) struct sunxi_mctl_ctl_reg { @@ -72,7 +84,8 @@ struct sunxi_mctl_ctl_reg { u32 clken; /* 0x0c */ u32 pgsr[2]; /* 0x10 PHY general status registers */ u32 statr; /* 0x18 */ - u8 res1[0x14]; /* 0x1c */ + u8 res1[0x10]; /* 0x1c */ + u32 lp3mr11; /* 0x2c */ u32 mr[4]; /* 0x30 mode registers */ u32 pllgcr; /* 0x40 */ u32 ptr[5]; /* 0x44 PHY timing registers */ @@ -120,7 +133,8 @@ struct sunxi_mctl_ctl_reg { struct { /* 0x300 DATX8 modules*/ u32 mdlr; /* 0x00 master delay line register */ u32 lcdlr[3]; /* 0x04 local calibrated delay line registers */ - u32 bdlr[12]; /* 0x10 bit delay line registers */ + u32 bdlr[11]; /* 0x10 bit delay line registers */ + u32 sdlr; /* 0x3c output enable bit delay registers */ u32 gtr; /* 0x40 general timing register */ u32 gcr; /* 0x44 general configuration register */ u32 gsr[3]; /* 0x48 general status registers */