X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=arch%2Farm%2Flib%2Fboard.c;h=024646cae5a7e8f8d459c620fe595e19e7484a4d;hb=ac486e3ba16c37514d135c359f61ed6e32a2921d;hp=7434b34f9c3d03103b54729e9fa0664443b3ae80;hpb=bc4e14c43c48b9c8084e177651338e4fa4938881;p=u-boot

diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index 7434b34f9c..024646cae5 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -48,6 +48,8 @@
 #include <nand.h>
 #include <onenand_uboot.h>
 #include <mmc.h>
+#include <libfdt.h>
+#include <fdtdec.h>
 #include <post.h>
 #include <logbuff.h>
 
@@ -71,16 +73,11 @@ extern int  AT91F_DataflashInit(void);
 extern void dataflash_print_info(void);
 #endif
 
-#ifdef CONFIG_DRIVER_RTL8019
-extern void rtl8019_get_enetaddr (uchar * addr);
-#endif
-
 #if defined(CONFIG_HARD_I2C) || \
     defined(CONFIG_SOFT_I2C)
 #include <i2c.h>
 #endif
 
-
 /************************************************************************
  * Coloured LED functionality
  ************************************************************************
@@ -233,6 +230,9 @@ init_fnc_t *init_sequence[] = {
 #endif
 #if defined(CONFIG_BOARD_EARLY_INIT_F)
 	board_early_init_f,
+#endif
+#ifdef CONFIG_OF_CONTROL
+	fdtdec_check_fdt,
 #endif
 	timer_init,		/* initialize timer */
 #ifdef CONFIG_FSL_ESDHC
@@ -266,6 +266,8 @@ void board_init_f(ulong bootflag)
 	ulong reg;
 #endif
 
+	bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_F, "board_init_f");
+
 	/* Pointer is writable since we allocated a register for it */
 	gd = (gd_t *) ((CONFIG_SYS_INIT_SP_ADDR) & ~0x07);
 	/* compiler optimization barrier needed for GCC >= 3.4 */
@@ -274,6 +276,16 @@ void board_init_f(ulong bootflag)
 	memset((void *)gd, 0, sizeof(gd_t));
 
 	gd->mon_len = _bss_end_ofs;
+#ifdef CONFIG_OF_EMBED
+	/* Get a pointer to the FDT */
+	gd->fdt_blob = _binary_dt_dtb_start;
+#elif defined CONFIG_OF_SEPARATE
+	/* FDT is at end of image */
+	gd->fdt_blob = (void *)(_end_ofs + _TEXT_BASE);
+#endif
+	/* Allow the early environment to override the fdt address */
+	gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16,
+						(uintptr_t)gd->fdt_blob);
 
 	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
 		if ((*init_fnc_ptr)() != 0) {
@@ -281,6 +293,14 @@ void board_init_f(ulong bootflag)
 		}
 	}
 
+#ifdef CONFIG_OF_CONTROL
+	/* For now, put this check after the console is ready */
+	if (fdtdec_prepare_fdt()) {
+		panic("** CONFIG_OF_CONTROL defined but no FDT - please see "
+			"doc/README.fdt-control");
+	}
+#endif
+
 	debug("monitor len: %08lX\n", gd->mon_len);
 	/*
 	 * Ram is setup, size stored in gd !!
@@ -445,6 +465,7 @@ void board_init_r(gd_t *id, ulong dest_addr)
 	gd = id;
 
 	gd->flags |= GD_FLG_RELOC;	/* tell others: relocation done */
+	bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_R, "board_init_r");
 
 	monitor_flash_len = _end_ofs;
 
@@ -453,7 +474,15 @@ void board_init_r(gd_t *id, ulong dest_addr)
 
 	debug("monitor flash len: %08lX\n", monitor_flash_len);
 	board_init();	/* Setup chipselects */
-
+	/*
+	 * TODO: printing of the clock inforamtion of the board is now
+	 * implemented as part of bdinfo command. Currently only support for
+	 * davinci SOC's is added. Remove this check once all the board
+	 * implement this.
+	 */
+#ifdef CONFIG_CLOCKS
+	set_cpu_clk_info(); /* Setup clock information */
+#endif
 #ifdef CONFIG_SERIAL_MULTI
 	serial_initialize();
 #endif
@@ -526,9 +555,6 @@ void board_init_r(gd_t *id, ulong dest_addr)
 	arm_pci_init();
 #endif
 
-	/* IP Address */
-	gd->bd->bi_ip_addr = getenv_IPaddr("ipaddr");
-
 	stdio_init();	/* get the devices list going. */
 
 	jumptable_init();
@@ -566,16 +592,8 @@ void board_init_r(gd_t *id, ulong dest_addr)
 
 	/* Initialize from environment */
 	load_addr = getenv_ulong("loadaddr", 16, load_addr);
-#if defined(CONFIG_CMD_NET)
-	{
-		char *s = getenv("bootfile");
-
-		if (s != NULL)
-			copy_filename(BootFile, s, sizeof(BootFile));
-	}
-#endif
 
-#ifdef BOARD_LATE_INIT
+#ifdef CONFIG_BOARD_LATE_INIT
 	board_late_init();
 #endif