X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=arch%2Farm%2Fmach-tegra%2FKconfig;h=51e50907d27a25177ebc9e6bbbcd9306e0a346c0;hb=1154541a528ac8bacdbdaccdb177dc64985fe7cb;hp=f4affa5512bcf8c5f78a75a8e0c7b020d1674821;hpb=09849f4a7779a247be8af5cfae44f7aad30e1222;p=u-boot

diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index f4affa5512..51e50907d2 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -1,28 +1,60 @@
 if TEGRA
 
+config SPL_GPIO_SUPPORT
+	default y
+
+config SPL_LIBCOMMON_SUPPORT
+	default y
+
+config SPL_LIBGENERIC_SUPPORT
+	default y
+
+config SPL_SERIAL_SUPPORT
+	default y
+
+config TEGRA_IVC
+	bool "Tegra IVC protocol"
+	help
+	  IVC (Inter-VM Communication) protocol is a Tegra-specific IPC
+	  (Inter Processor Communication) framework. Within the context of
+	  U-Boot, it is typically used for communication between the main CPU
+	  and various auxiliary processors.
+
 config TEGRA_COMMON
 	bool "Tegra common options"
+	select CLK
 	select DM
 	select DM_ETH
 	select DM_GPIO
 	select DM_I2C
 	select DM_KEYBOARD
-	select DM_PCI
-	select DM_PCI_COMPAT
+	select DM_MMC
 	select DM_PWM
+	select DM_RESET
 	select DM_SERIAL
 	select DM_SPI
 	select DM_SPI_FLASH
+	select MISC
 	select OF_CONTROL
 	select VIDCONSOLE_AS_LCD if DM_VIDEO
+	select BOARD_EARLY_INIT_F
+	imply CRC32_VERIFY
+
+config TEGRA_NO_BPMP
+	bool "Tegra common options for SoCs without BPMP"
+	select TEGRA_CAR
+	select TEGRA_CAR_CLOCK
+	select TEGRA_CAR_RESET
 
 config TEGRA_ARMV7_COMMON
 	bool "Tegra 32-bit common options"
 	select CPU_V7
 	select SPL
+	select SPL_BOARD_INIT if SPL
 	select SUPPORT_SPL
 	select TEGRA_COMMON
 	select TEGRA_GPIO
+	select TEGRA_NO_BPMP
 
 config TEGRA_ARMV8_COMMON
 	bool "Tegra 64-bit common options"
@@ -35,10 +67,15 @@ choice
 
 config TEGRA20
 	bool "Tegra20 family"
+	select ARM_ERRATA_716044
+	select ARM_ERRATA_742230
+	select ARM_ERRATA_751472
 	select TEGRA_ARMV7_COMMON
 
 config TEGRA30
 	bool "Tegra30 family"
+	select ARM_ERRATA_743622
+	select ARM_ERRATA_751472
 	select TEGRA_ARMV7_COMMON
 
 config TEGRA114
@@ -48,18 +85,25 @@ config TEGRA114
 config TEGRA124
 	bool "Tegra124 family"
 	select TEGRA_ARMV7_COMMON
+	imply REGMAP
+	imply SYSCON
 
 config TEGRA210
 	bool "Tegra210 family"
 	select TEGRA_GPIO
 	select TEGRA_ARMV8_COMMON
+	select TEGRA_NO_BPMP
 
 config TEGRA186
 	bool "Tegra186 family"
 	select DM_MAILBOX
+	select TEGRA186_BPMP
+	select TEGRA186_CLOCK
 	select TEGRA186_GPIO
+	select TEGRA186_RESET
 	select TEGRA_ARMV8_COMMON
 	select TEGRA_HSP
+	select TEGRA_IVC
 
 endchoice
 
@@ -86,4 +130,20 @@ source "arch/arm/mach-tegra/tegra124/Kconfig"
 source "arch/arm/mach-tegra/tegra210/Kconfig"
 source "arch/arm/mach-tegra/tegra186/Kconfig"
 
+config CMD_ENTERRCM
+	bool "Enable 'enterrcm' command"
+	default y
+	help
+	  Tegra's boot ROM supports a mode whereby code may be downloaded and
+	  flash-programmed over a USB connection. On dev boards, this is
+	  typically entered by holding down a "force recovery" button and
+	  resetting the CPU. However, not all boards have such a button (one
+	  example is the Compulab Trimslice), so a method to enter RCM from
+	  software is useful.
+
+	  Even on boards other than Trimslice, controlling this over a UART
+	  may be useful, e.g. to allow simple remote control without the need
+	  for mechanical button actuators, or hooking up relays/... to the
+	  button.
+
 endif