X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=arch%2Farm%2Fmach-uniphier%2FKconfig;h=5739325da71b91004a4b168970647525120670c7;hb=e1a71f8b339220fa74c9cd5d36ae9c444c492e83;hp=2e824bb7b858d3fb0b85f7c26360d5ea547a3120;hpb=b58d3512442357cb023bce69f55c08b9fd21beaa;p=u-boot

diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig
index 2e824bb7b8..5739325da7 100644
--- a/arch/arm/mach-uniphier/Kconfig
+++ b/arch/arm/mach-uniphier/Kconfig
@@ -1,20 +1,5 @@
 if ARCH_UNIPHIER
 
-config SPL_LIBCOMMON_SUPPORT
-	default y
-
-config SPL_LIBGENERIC_SUPPORT
-	default y
-
-config SPL_MMC_SUPPORT
-	default y if !ARCH_UNIPHIER_64BIT
-
-config SPL_NAND_SUPPORT
-	default y if !ARM64
-
-config SPL_SERIAL_SUPPORT
-	default y
-
 config SYS_CONFIG_NAME
 	default "uniphier"
 
@@ -28,66 +13,87 @@ config ARCH_UNIPHIER_32BIT
 config ARCH_UNIPHIER_64BIT
 	bool
 	select ARM64
-	select SPL_SEPARATE_BSS
-	select ARMV8_MULTIENTRY
-	select ARMV8_SPIN_TABLE
+	select CMD_UNZIP
+	select SPL_SEPARATE_BSS if SPL
+	select ARMV8_MULTIENTRY if SPL
+	select ARMV8_SPIN_TABLE if SPL
 
 choice
         prompt "UniPhier SoC select"
         default ARCH_UNIPHIER_PRO4
 
 config ARCH_UNIPHIER_SLD3
-	bool "UniPhier PH1-sLD3 SoC"
+	bool "UniPhier sLD3 SoC"
 	select ARCH_UNIPHIER_32BIT
 
 config ARCH_UNIPHIER_LD4_SLD8
-	bool "UniPhier PH1-LD4/PH1-sLD8 SoC"
+	bool "UniPhier LD4/sLD8 SoCs"
 	select ARCH_UNIPHIER_32BIT
 
 config ARCH_UNIPHIER_PRO4
-	bool "UniPhier PH1-Pro4 SoC"
+	bool "UniPhier Pro4 SoC"
 	select ARCH_UNIPHIER_32BIT
 
 config ARCH_UNIPHIER_PRO5_PXS2_LD6B
-	bool "UniPhier PH1-Pro5/ProXstream2/PH1-LD6b SoC"
+	bool "UniPhier Pro5/PXs2/LD6b SoCs"
 	select ARCH_UNIPHIER_32BIT
 
-config ARCH_UNIPHIER_LD11
-	bool "UniPhier PH1-LD11 SoC"
+config ARCH_UNIPHIER_LD11_SINGLE
+	bool "UniPhier LD11 SoC"
 	select ARCH_UNIPHIER_64BIT
 
-config ARCH_UNIPHIER_LD20
-	bool "UniPhier PH1-LD20 SoC"
+config ARCH_UNIPHIER_LD20_SINGLE
+	bool "UniPhier LD20 SoC"
+	select ARCH_UNIPHIER_64BIT
+
+config ARCH_UNIPHIER_V8_MULTI
+	bool "UniPhier V8 SoCs"
+	depends on !SPL
 	select ARCH_UNIPHIER_64BIT
-	select OF_BOARD_SETUP
 
 endchoice
 
 config ARCH_UNIPHIER_LD4
-	bool "Enable UniPhier PH1-LD4 SoC support"
+	bool "Enable UniPhier LD4 SoC support"
 	depends on ARCH_UNIPHIER_LD4_SLD8
 	default y
 
 config ARCH_UNIPHIER_SLD8
-	bool "Enable UniPhier PH1-sLD8 SoC support"
+	bool "Enable UniPhier sLD8 SoC support"
 	depends on ARCH_UNIPHIER_LD4_SLD8
 	default y
 
 config ARCH_UNIPHIER_PRO5
-	bool "Enable UniPhier PH1-Pro5 SoC support"
+	bool "Enable UniPhier Pro5 SoC support"
 	depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
 	default y
 
 config ARCH_UNIPHIER_PXS2
-	bool "Enable UniPhier ProXstream2 SoC support"
+	bool "Enable UniPhier Pxs2 SoC support"
 	depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
 	default y
 
 config ARCH_UNIPHIER_LD6B
-	bool "Enable UniPhier PH1-LD6b SoC support"
+	bool "Enable UniPhier LD6b SoC support"
 	depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
 	default y
 
+config ARCH_UNIPHIER_LD11
+	bool "Enable UniPhier LD11 SoC support" if ARCH_UNIPHIER_V8_MULTI
+	depends on ARCH_UNIPHIER_LD11_SINGLE || ARCH_UNIPHIER_V8_MULTI
+	default y
+
+config ARCH_UNIPHIER_LD20
+	bool "Enable UniPhier LD20 SoC support" if ARCH_UNIPHIER_V8_MULTI
+	depends on ARCH_UNIPHIER_LD20_SINGLE || ARCH_UNIPHIER_V8_MULTI
+	select OF_BOARD_SETUP
+	default y
+
+config ARCH_UNIPHIER_PXS3
+	bool "Enable UniPhier PXs3 SoC support"
+	depends on ARCH_UNIPHIER_V8_MULTI
+	default y
+
 config CACHE_UNIPHIER
 	bool "Enable the UniPhier L2 cache controller"
 	depends on ARCH_UNIPHIER_32BIT
@@ -114,7 +120,8 @@ config CMD_PINMON
 
 config CMD_DDRPHY_DUMP
 	bool "Enable dump command of DDR PHY parameters"
-	depends on ARCH_UNIPHIER_LD4 || ARCH_UNIPHIER_PRO4 || ARCH_UNIPHIER_SLD8
+	depends on ARCH_UNIPHIER_LD4 || ARCH_UNIPHIER_PRO4 || \
+		ARCH_UNIPHIER_SLD8 || ARCH_UNIPHIER_LD11
 	default y
 	help
 	  The command "ddrphy" shows the resulting parameters of DDR PHY