X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=arch%2Farm%2Fmach-uniphier%2FKconfig;h=cc759b3e01dc0cc41bddcd19f7bc063caa9aeb3d;hb=c42ee367fdab51eb9add12e73e8a25306030bd44;hp=ae763ad94e3f266a767672111844f9163ff3ab46;hpb=d77fa2ff766bbb4b867e791187f78b6033071613;p=u-boot

diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig
index ae763ad94e..cc759b3e01 100644
--- a/arch/arm/mach-uniphier/Kconfig
+++ b/arch/arm/mach-uniphier/Kconfig
@@ -3,63 +3,87 @@ if ARCH_UNIPHIER
 config SYS_CONFIG_NAME
 	default "uniphier"
 
+config ARCH_UNIPHIER_32BIT
+	bool
+	select CPU_V7
+	select CPU_V7_HAS_NONSEC
+	select ARMV7_NONSEC
+	select ARCH_SUPPORT_PSCI
+
 choice
         prompt "UniPhier SoC select"
-        default ARCH_UNIPHIER_PRO4
-
-config ARCH_UNIPHIER_SLD3
-	bool "UniPhier PH1-sLD3 SoC"
-	select CPU_V7
+        default ARCH_UNIPHIER_V7_MULTI
 
 config ARCH_UNIPHIER_LD4_SLD8
-	bool "UniPhier PH1-LD4/PH1-sLD8 SoC"
-	select CPU_V7
-
-config ARCH_UNIPHIER_PRO4
-	bool "UniPhier PH1-Pro4 SoC"
-	select CPU_V7
+	bool "UniPhier LD4/sLD8 SoCs"
+	select ARCH_UNIPHIER_32BIT
 
-config ARCH_UNIPHIER_PRO5_PXS2_LD6B
-	bool "UniPhier PH1-Pro5/ProXstream2/PH1-LD6b SoC"
-	select CPU_V7
+config ARCH_UNIPHIER_V7_MULTI
+	bool "UniPhier Pro4/Pro5/PXs2/LD6b SoCs"
+	select ARCH_UNIPHIER_32BIT
 
-config ARCH_UNIPHIER_LD11
-	bool "UniPhier PH1-LD11 SoC"
+config ARCH_UNIPHIER_V8_MULTI
+	bool "UniPhier V8 SoCs"
+	depends on !SPL
 	select ARM64
-	select SPL_SEPARATE_BSS
-
-config ARCH_UNIPHIER_LD20
-	bool "UniPhier PH1-LD20 SoC"
-	select ARM64
-	select SPL_SEPARATE_BSS
+	select CMD_UNZIP
 
 endchoice
 
 config ARCH_UNIPHIER_LD4
-	bool "Enable UniPhier PH1-LD4 SoC support"
+	bool "Enable UniPhier LD4 SoC support"
 	depends on ARCH_UNIPHIER_LD4_SLD8
 	default y
 
 config ARCH_UNIPHIER_SLD8
-	bool "Enable UniPhier PH1-sLD8 SoC support"
+	bool "Enable UniPhier sLD8 SoC support"
 	depends on ARCH_UNIPHIER_LD4_SLD8
 	default y
 
+config ARCH_UNIPHIER_PRO4
+	bool "Enable UniPhier Pro4 SoC support"
+	depends on ARCH_UNIPHIER_V7_MULTI
+	default y
+
 config ARCH_UNIPHIER_PRO5
-	bool "Enable UniPhier PH1-Pro5 SoC support"
-	depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
+	bool "Enable UniPhier Pro5 SoC support"
+	depends on ARCH_UNIPHIER_V7_MULTI
 	default y
 
 config ARCH_UNIPHIER_PXS2
-	bool "Enable UniPhier ProXstream2 SoC support"
-	depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
+	bool "Enable UniPhier Pxs2 SoC support"
+	depends on ARCH_UNIPHIER_V7_MULTI
 	default y
 
 config ARCH_UNIPHIER_LD6B
-	bool "Enable UniPhier PH1-LD6b SoC support"
-	depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
+	bool "Enable UniPhier LD6b SoC support"
+	depends on ARCH_UNIPHIER_V7_MULTI
 	default y
 
+config ARCH_UNIPHIER_LD11
+	bool "Enable UniPhier LD11 SoC support"
+	depends on ARCH_UNIPHIER_V8_MULTI
+	default y
+
+config ARCH_UNIPHIER_LD20
+	bool "Enable UniPhier LD20 SoC support"
+	depends on ARCH_UNIPHIER_V8_MULTI
+	select OF_BOARD_SETUP
+	default y
+
+config ARCH_UNIPHIER_PXS3
+	bool "Enable UniPhier PXs3 SoC support"
+	depends on ARCH_UNIPHIER_V8_MULTI
+	default y
+
+config CACHE_UNIPHIER
+	bool "Enable the UniPhier L2 cache controller"
+	depends on ARCH_UNIPHIER_32BIT
+	select SYS_CACHE_SHIFT_7
+	default y
+	help
+	  This option allows to use the UniPhier System Cache as L2 cache.
+
 config MICRO_SUPPORT_CARD
 	bool "Use Micro Support Card"
 	help
@@ -78,7 +102,8 @@ config CMD_PINMON
 
 config CMD_DDRPHY_DUMP
 	bool "Enable dump command of DDR PHY parameters"
-	depends on ARCH_UNIPHIER_LD4 || ARCH_UNIPHIER_PRO4 || ARCH_UNIPHIER_SLD8
+	depends on ARCH_UNIPHIER_LD4 || ARCH_UNIPHIER_PRO4 || \
+		ARCH_UNIPHIER_SLD8 || ARCH_UNIPHIER_LD11
 	default y
 	help
 	  The command "ddrphy" shows the resulting parameters of DDR PHY
@@ -92,4 +117,6 @@ config CMD_DDRMPHY_DUMP
 	  The command "ddrmphy" shows the resulting parameters of DDR Multi PHY
 	  training; it is useful for the evaluation of DDR Multi PHY training.
 
+config SYS_SOC
+	default "uniphier-v7" if ARCH_UNIPHIER_LD4_SLD8 || ARCH_UNIPHIER_V7_MULTI
 endif