X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=arch%2Fmips%2FKconfig;h=d97930e577bb057a45ce62249871244440c9bdcf;hb=af1b7286d8b2712cff5779d8a1565afed9d9d8e6;hp=7162f3c1ec115294b3fc1df07042d0db24bd99e7;hpb=1d3d0f1f1cd8bac8ea0135c92a2bcd5020abfb1d;p=u-boot diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 7162f3c1ec..d97930e577 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -5,8 +5,8 @@ config SYS_ARCH default "mips" config SYS_CPU - default "mips32" if CPU_MIPS32_R1 || CPU_MIPS32_R2 - default "mips64" if CPU_MIPS64_R1 || CPU_MIPS64_R2 + default "mips32" if CPU_MIPS32 + default "mips64" if CPU_MIPS64 choice prompt "Target select" @@ -20,16 +20,28 @@ config TARGET_QEMU_MIPS select SUPPORTS_CPU_MIPS32_R2 select SUPPORTS_CPU_MIPS64_R1 select SUPPORTS_CPU_MIPS64_R2 + select ROM_EXCEPTION_VECTORS config TARGET_MALTA bool "Support malta" + select DM + select DM_SERIAL select DYNAMIC_IO_PORT_BASE + select MIPS_CM + select MIPS_L2_CACHE + select OF_CONTROL + select OF_ISA_BUS select SUPPORTS_BIG_ENDIAN select SUPPORTS_LITTLE_ENDIAN select SUPPORTS_CPU_MIPS32_R1 select SUPPORTS_CPU_MIPS32_R2 + select SUPPORTS_CPU_MIPS32_R6 + select SUPPORTS_CPU_MIPS64_R1 + select SUPPORTS_CPU_MIPS64_R2 + select SUPPORTS_CPU_MIPS64_R6 select SWAP_IO_SPACE select MIPS_L1_CACHE_SHIFT_6 + select ROM_EXCEPTION_VECTORS config TARGET_VCT bool "Support vct" @@ -37,6 +49,7 @@ config TARGET_VCT select SUPPORTS_CPU_MIPS32_R1 select SUPPORTS_CPU_MIPS32_R2 select SYS_MIPS_CACHE_INIT_RAM_LOAD + select ROM_EXCEPTION_VECTORS config TARGET_DBAU1X00 bool "Support dbau1x00" @@ -45,6 +58,7 @@ config TARGET_DBAU1X00 select SUPPORTS_CPU_MIPS32_R1 select SUPPORTS_CPU_MIPS32_R2 select SYS_MIPS_CACHE_INIT_RAM_LOAD + select ROM_EXCEPTION_VECTORS select MIPS_TUNE_4KC config TARGET_PB1X00 @@ -53,6 +67,7 @@ config TARGET_PB1X00 select SUPPORTS_CPU_MIPS32_R1 select SUPPORTS_CPU_MIPS32_R2 select SYS_MIPS_CACHE_INIT_RAM_LOAD + select ROM_EXCEPTION_VECTORS select MIPS_TUNE_4KC config ARCH_ATH79 @@ -65,10 +80,45 @@ config MACH_PIC32 select OF_CONTROL select DM +config TARGET_BOSTON + bool "Support Boston" + select DM + select DM_SERIAL + select OF_CONTROL + select MIPS_CM + select MIPS_L1_CACHE_SHIFT_6 + select MIPS_L2_CACHE + select SUPPORTS_BIG_ENDIAN + select SUPPORTS_LITTLE_ENDIAN + select SUPPORTS_CPU_MIPS32_R1 + select SUPPORTS_CPU_MIPS32_R2 + select SUPPORTS_CPU_MIPS32_R6 + select SUPPORTS_CPU_MIPS64_R1 + select SUPPORTS_CPU_MIPS64_R2 + select SUPPORTS_CPU_MIPS64_R6 + select ROM_EXCEPTION_VECTORS + +config TARGET_XILFPGA + bool "Support Imagination Xilfpga" + select OF_CONTROL + select DM + select DM_SERIAL + select DM_GPIO + select DM_ETH + select SUPPORTS_LITTLE_ENDIAN + select SUPPORTS_CPU_MIPS32_R1 + select SUPPORTS_CPU_MIPS32_R2 + select MIPS_L1_CACHE_SHIFT_4 + select ROM_EXCEPTION_VECTORS + help + This supports IMGTEC MIPSfpga platform + endchoice source "board/dbau1x00/Kconfig" +source "board/imgtec/boston/Kconfig" source "board/imgtec/malta/Kconfig" +source "board/imgtec/xilfpga/Kconfig" source "board/micronas/vct/Kconfig" source "board/pb1x00/Kconfig" source "board/qemu-mips/Kconfig" @@ -104,7 +154,7 @@ config CPU_MIPS32_R1 depends on SUPPORTS_CPU_MIPS32_R1 select 32BIT help - Choose this option to build an U-Boot for release 1 or later of the + Choose this option to build an U-Boot for release 1 through 5 of the MIPS32 architecture. config CPU_MIPS32_R2 @@ -112,7 +162,15 @@ config CPU_MIPS32_R2 depends on SUPPORTS_CPU_MIPS32_R2 select 32BIT help - Choose this option to build an U-Boot for release 2 or later of the + Choose this option to build an U-Boot for release 2 through 5 of the + MIPS32 architecture. + +config CPU_MIPS32_R6 + bool "MIPS32 Release 6" + depends on SUPPORTS_CPU_MIPS32_R6 + select 32BIT + help + Choose this option to build an U-Boot for release 6 or later of the MIPS32 architecture. config CPU_MIPS64_R1 @@ -120,7 +178,7 @@ config CPU_MIPS64_R1 depends on SUPPORTS_CPU_MIPS64_R1 select 64BIT help - Choose this option to build a kernel for release 1 or later of the + Choose this option to build a kernel for release 1 through 5 of the MIPS64 architecture. config CPU_MIPS64_R2 @@ -128,11 +186,33 @@ config CPU_MIPS64_R2 depends on SUPPORTS_CPU_MIPS64_R2 select 64BIT help - Choose this option to build a kernel for release 2 or later of the + Choose this option to build a kernel for release 2 through 5 of the + MIPS64 architecture. + +config CPU_MIPS64_R6 + bool "MIPS64 Release 6" + depends on SUPPORTS_CPU_MIPS64_R6 + select 64BIT + help + Choose this option to build a kernel for release 6 or later of the MIPS64 architecture. endchoice +menu "General setup" + +config ROM_EXCEPTION_VECTORS + bool "Build U-Boot image with exception vectors" + help + Enable this to include exception vectors in the U-Boot image. This is + required if the U-Boot entry point is equal to the address of the + CPU reset exception vector (e.g. U-Boot as ROM loader in Qemu, + U-Boot booted from parallel NOR flash). + Disable this, if the U-Boot image is booted from DRAM (e.g. by SPL). + In that case the image size will be reduced by 0x500 bytes. + +endmenu + menu "OS boot interface" config MIPS_BOOT_CMDLINE_LEGACY @@ -175,19 +255,25 @@ config SUPPORTS_CPU_MIPS32_R1 config SUPPORTS_CPU_MIPS32_R2 bool +config SUPPORTS_CPU_MIPS32_R6 + bool + config SUPPORTS_CPU_MIPS64_R1 bool config SUPPORTS_CPU_MIPS64_R2 bool +config SUPPORTS_CPU_MIPS64_R6 + bool + config CPU_MIPS32 bool - default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 + default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 || CPU_MIPS32_R6 config CPU_MIPS64 bool - default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 + default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 || CPU_MIPS64_R6 config MIPS_TUNE_4KC bool @@ -198,6 +284,12 @@ config MIPS_TUNE_14KC config MIPS_TUNE_24KC bool +config MIPS_TUNE_34KC + bool + +config MIPS_TUNE_74KC + bool + config 32BIT bool @@ -210,6 +302,51 @@ config SWAP_IO_SPACE config SYS_MIPS_CACHE_INIT_RAM_LOAD bool +config MIPS_INIT_STACK_IN_SRAM + bool + default n + help + Select this if the initial stack frame could be setup in SRAM. + Normally the initial stack frame is set up in DRAM which is often + only available after lowlevel_init. With this option the initial + stack frame and the early C environment is set up before + lowlevel_init. Thus lowlevel_init does not need to be implemented + in assembler. + +config SYS_DCACHE_SIZE + int + default 0 + help + The total size of the L1 Dcache, if known at compile time. + +config SYS_DCACHE_LINE_SIZE + int + default 0 + help + The size of L1 Dcache lines, if known at compile time. + +config SYS_ICACHE_SIZE + int + default 0 + help + The total size of the L1 ICache, if known at compile time. + +config SYS_ICACHE_LINE_SIZE + int + default 0 + help + The size of L1 Icache lines, if known at compile time. + +config SYS_CACHE_SIZE_AUTO + def_bool y if SYS_DCACHE_SIZE = 0 && SYS_ICACHE_SIZE = 0 && \ + SYS_DCACHE_LINE_SIZE = 0 && SYS_ICACHE_LINE_SIZE = 0 + help + Select this (or let it be auto-selected by not defining any cache + sizes) in order to allow U-Boot to automatically detect the sizes + of caches at runtime. This has a small cost in code size & runtime + so if you know the cache configuration for your system at compile + time it would be beneficial to configure it. + config MIPS_L1_CACHE_SHIFT_4 bool @@ -230,9 +367,31 @@ config MIPS_L1_CACHE_SHIFT default "4" if MIPS_L1_CACHE_SHIFT_4 default "5" +config MIPS_L2_CACHE + bool + help + Select this if your system includes an L2 cache and you want U-Boot + to initialise & maintain it. + config DYNAMIC_IO_PORT_BASE bool +config MIPS_CM + bool + help + Select this if your system contains a MIPS Coherence Manager and you + wish U-Boot to configure it or make use of it to retrieve system + information such as cache configuration. + +config MIPS_CM_BASE + hex + default 0x1fbf8000 + help + The physical base address at which to map the MIPS Coherence Manager + Global Configuration Registers (GCRs). This should be set such that + the GCRs occupy a region of the physical address space which is + otherwise unused, or at minimum that software doesn't need to access. + endif endmenu