X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=arch%2Fx86%2Fcpu%2Fstart.S;h=a5cba1cf2a766680e3e1b8ab6290bee2aa8a0191;hb=806f86bd826e7a0fbefd4f34c550df400905992a;hp=7ef8b880ec600971207ad33caed4208b36c6cdc5;hpb=da3a95d60bb4476776126f453a0dc2c522d5d711;p=u-boot diff --git a/arch/x86/cpu/start.S b/arch/x86/cpu/start.S index 7ef8b880ec..a5cba1cf2a 100644 --- a/arch/x86/cpu/start.S +++ b/arch/x86/cpu/start.S @@ -18,6 +18,14 @@ #include #include +/* + * Define this to boot U-Boot from a 32-bit program which sets the GDT + * differently. This can be used to boot directly from any stage of coreboot, + * for example, bypassing the normal payload-loading feature. + * This is only useful for development. + */ +#undef LOAD_FROM_32_BIT + .section .text .code32 .globl _start @@ -41,17 +49,36 @@ _x86boot_start: wbinvd /* Tell 32-bit code it is being entered from an in-RAM copy */ - movw $GD_FLG_WARM_BOOT, %bx + movl $GD_FLG_WARM_BOOT, %ebx + + /* + * Zero the BIST (Built-In Self Test) value since we don't have it. + * It must be 0 or the previous loader would have reported an error. + */ + movl $0, %ebp + jmp 1f + + /* Add a way for tools to discover the _start entry point */ + .align 4 + .long 0x12345678 _start: /* * This is the 32-bit cold-reset entry point, coming from start16. - * Set %bx to 0 to indicate this. + * Set %ebx to GD_FLG_COLD_BOOT to indicate this. */ - movw $GD_FLG_COLD_BOOT, %bx -1: + movl $GD_FLG_COLD_BOOT, %ebx + /* Save BIST */ movl %eax, %ebp +1: + + /* Save table pointer */ + movl %ecx, %esi + +#ifdef LOAD_FROM_32_BIT + lgdt gdt_ptr2 +#endif /* Load the segement registers to match the GDT loaded in start16.S */ movl $(X86_GDT_ENTRY_32BIT_DS * X86_GDT_ENTRY_SIZE), %eax @@ -89,8 +116,7 @@ car_init_ret: * * top-> CONFIG_SYS_CAR_ADDR + CONFIG_SYS_CAR_SIZE * MRC area - * global_data - * x86 global descriptor table + * global_data with x86 global descriptor table * early malloc area * stack * bottom-> CONFIG_SYS_CAR_ADDR @@ -101,62 +127,45 @@ car_init_ret: #endif #else /* - * When we get here after car_init(), esp points to a temporary stack - * and esi holds the HOB list address returned by the FSP. + * U-Boot enters here twice. For the first time it comes from + * car_init_done() with esp points to a temporary stack and esi + * set to zero. For the second time it comes from fsp_init_done() + * with esi holding the HOB list address returned by the FSP. */ #endif + /* Set up global data */ + mov %esp, %eax + call board_init_f_alloc_reserve + mov %eax, %esp + call board_init_f_init_reserve + +#ifdef CONFIG_DEBUG_UART + call debug_uart_init +#endif - /* Reserve space on stack for global data */ - subl $GENERATED_GBL_DATA_SIZE, %esp - - /* Align global data to 16-byte boundary */ - andl $0xfffffff0, %esp - post_code(POST_START_STACK) - - /* Zero the global data since it won't happen later */ - xorl %eax, %eax - movl $GENERATED_GBL_DATA_SIZE, %ecx - movl %esp, %edi - rep stosb - + /* Get address of global_data */ + mov %fs:0, %edx #ifdef CONFIG_HAVE_FSP + /* Store the HOB list if we have one */ test %esi, %esi jz skip_hob + movl %esi, GD_HOB_LIST(%edx) - /* Store HOB list */ - movl %esp, %edx - addl $GD_HOB_LIST, %edx - movl %esi, (%edx) - + /* + * After fsp_init() returns, the stack has already been switched to a + * place within system memory as defined by CONFIG_FSP_TEMP_RAM_ADDR. + * Enlarge the size of malloc() pool before relocation since we have + * plenty of memory now. + */ + subl $CONFIG_FSP_SYS_MALLOC_F_LEN, %esp + movl %esp, GD_MALLOC_BASE(%edx) skip_hob: +#else + /* Store table pointer */ + movl %esi, GD_TABLE(%edx) #endif - /* Setup first parameter to setup_gdt, pointer to global_data */ - movl %esp, %eax - - /* Reserve space for global descriptor table */ - subl $X86_GDT_SIZE, %esp - - /* Align temporary global descriptor table to 16-byte boundary */ - andl $0xfffffff0, %esp - movl %esp, %ecx - -#if defined(CONFIG_SYS_MALLOC_F_LEN) - /* Set up the pre-relocation malloc pool */ - subl $CONFIG_SYS_MALLOC_F_LEN, %esp - movl %eax, %edx - addl $GD_MALLOC_BASE, %edx - movl %esp, (%edx) -#endif - /* Store BIST into global_data */ - movl %eax, %edx - addl $GD_BIST, %edx - movl %ebp, (%edx) - - /* Set second parameter to setup_gdt() */ - movl %ecx, %edx - - /* Setup global descriptor table so gd->xyz works */ - call setup_gdt + /* Store BIST */ + movl %ebp, GD_BIST(%edx) /* Set parameter to board_init_f() to boot flags */ post_code(POST_START_DONE) @@ -183,37 +192,7 @@ board_init_f_r_trampoline: /* Stack grows down from top of SDRAM */ movl %eax, %esp - /* Reserve space on stack for global data */ - subl $GENERATED_GBL_DATA_SIZE, %esp - - /* Align global data to 16-byte boundary */ - andl $0xfffffff0, %esp - - /* Setup first parameter to memcpy() and setup_gdt() */ - movl %esp, %eax - - /* Setup second parameter to memcpy() */ - fs movl 0, %edx - - /* Set third parameter to memcpy() */ - movl $GENERATED_GBL_DATA_SIZE, %ecx - - /* Copy global data from CAR to SDRAM stack */ - call memcpy - - /* Reserve space for global descriptor table */ - subl $X86_GDT_SIZE, %esp - - /* Align global descriptor table to 16-byte boundary */ - andl $0xfffffff0, %esp - - /* Set second parameter to setup_gdt() */ - movl %esp, %edx - - /* Setup global descriptor table so gd->xyz works */ - call setup_gdt - - /* Set if we need to disable CAR */ + /* See if we need to disable CAR */ .weak car_uninit movl $car_uninit, %eax cmpl $0, %eax @@ -253,3 +232,71 @@ multiboot_header: .long 0 /* entry addr */ .long CONFIG_SYS_TEXT_BASE + +#ifdef LOAD_FROM_32_BIT + /* + * The following Global Descriptor Table is just enough to get us into + * 'Flat Protected Mode' - It will be discarded as soon as the final + * GDT is setup in a safe location in RAM + */ +gdt_ptr2: + .word 0x1f /* limit (31 bytes = 4 GDT entries - 1) */ + .long gdt_rom2 /* base */ + + /* Some CPUs are picky about GDT alignment... */ + .align 16 +.globl gdt_rom2 +gdt_rom2: + /* + * The GDT table ... + * + * Selector Type + * 0x00 NULL + * 0x08 Unused + * 0x10 32bit code + * 0x18 32bit data/stack + */ + /* The NULL Desciptor - Mandatory */ + .word 0x0000 /* limit_low */ + .word 0x0000 /* base_low */ + .byte 0x00 /* base_middle */ + .byte 0x00 /* access */ + .byte 0x00 /* flags + limit_high */ + .byte 0x00 /* base_high */ + + /* Unused Desciptor - (matches Linux) */ + .word 0x0000 /* limit_low */ + .word 0x0000 /* base_low */ + .byte 0x00 /* base_middle */ + .byte 0x00 /* access */ + .byte 0x00 /* flags + limit_high */ + .byte 0x00 /* base_high */ + + /* + * The Code Segment Descriptor: + * - Base = 0x00000000 + * - Size = 4GB + * - Access = Present, Ring 0, Exec (Code), Readable + * - Flags = 4kB Granularity, 32-bit + */ + .word 0xffff /* limit_low */ + .word 0x0000 /* base_low */ + .byte 0x00 /* base_middle */ + .byte 0x9b /* access */ + .byte 0xcf /* flags + limit_high */ + .byte 0x00 /* base_high */ + + /* + * The Data Segment Descriptor: + * - Base = 0x00000000 + * - Size = 4GB + * - Access = Present, Ring 0, Non-Exec (Data), Writable + * - Flags = 4kB Granularity, 32-bit + */ + .word 0xffff /* limit_low */ + .word 0x0000 /* base_low */ + .byte 0x00 /* base_middle */ + .byte 0x93 /* access */ + .byte 0xcf /* flags + limit_high */ + .byte 0x00 /* base_high */ +#endif