X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=bacula%2Fsrc%2Fstored%2Fbacula-sd.conf.in;h=4c0ad8b5980b5f00ba1487ccf2e4d3dac50d38e0;hb=bc9b9b481e86991abd879d30aa03b64b4c68d578;hp=37f415e4a2d6e1eca2d7b7173f8a08a1218af21f;hpb=6cee586a50e25cb35eaa872aaa2f992409f72972;p=bacula%2Fbacula diff --git a/bacula/src/stored/bacula-sd.conf.in b/bacula/src/stored/bacula-sd.conf.in index 37f415e4a2..4c0ad8b598 100644 --- a/bacula/src/stored/bacula-sd.conf.in +++ b/bacula/src/stored/bacula-sd.conf.in @@ -15,7 +15,7 @@ Storage { # definition of myself SDPort = @sd_port@ # Director's port WorkingDirectory = "@working_dir@" Pid Directory = "@piddir@" - Subsys Directory = "@subsysdir@" + Maximum Concurrent Jobs = 20 } # @@ -26,6 +26,16 @@ Director { Password = "@sd_password@" } +# +# Restricted Director, used by tray-monitor to get the +# status of the storage daemon +# +Director { + Name = @hostname@-mon + Password = "@mon_sd_password@" + Monitor = yes +} + # # Devices supported by this Storage daemon # To connect, the Director's bacula-dir.conf must have the @@ -35,40 +45,162 @@ Director { Device { Name = FileStorage Media Type = File - Archive Device = /tmp - LabelMedia = yes; # lets Bacula label unlabelled media + Archive Device = @archivedir@ + LabelMedia = yes; # lets Bacula label unlabeled media Random Access = Yes; AutomaticMount = yes; # when device opened, read it RemovableMedia = no; AlwaysOpen = no; } +# +# An autochanger device with two drives +# +#Autochanger { +# Name = Autochanger +# Device = Drive-1 +# Device = Drive-2 +# Changer Command = "@scriptdir@/mtx-changer %c %o %S %a %d" +# Changer Device = /dev/sg0 +#} + #Device { -# Name = "HP DLT 80" -# Media Type = DLT8000 -# Archive Device = @TAPEDRIVE@ +# Name = Drive-1 # +# Drive Index = 0 +# Media Type = DLT-8000 +# Archive Device = /dev/nst0 # AutomaticMount = yes; # when device opened, read it # AlwaysOpen = yes; # RemovableMedia = yes; +# RandomAccess = no; +# AutoChanger = yes +# # +# # Enable the Alert command only if you have the mtx package loaded +# # Note, apparently on some systems, tapeinfo resets the SCSI controller +# # thus if you turn this on, make sure it does not reset your SCSI +# # controller. I have never had any problems, and smartctl does +# # not seem to cause such problems. +# # +# Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'" +# If you have smartctl, enable this, it has more info than tapeinfo +# Alert Command = "sh -c 'smartctl -H -l error %c'" #} #Device { -# Name = SDT-7000 # -# Media Type = DDS-2 -# Archive Device = @TAPEDRIVE@ +# Name = Drive-2 # +# Drive Index = 1 +# Media Type = DLT-8000 +# Archive Device = /dev/nst1 # AutomaticMount = yes; # when device opened, read it # AlwaysOpen = yes; # RemovableMedia = yes; +# RandomAccess = no; +# AutoChanger = yes +# # Enable the Alert command only if you have the mtx package loaded +# Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'" +# If you have smartctl, enable this, it has more info than tapeinfo +# Alert Command = "sh -c 'smartctl -H -l error %c'" #} +# +# A Linux or Solaris tape drive +# #Device { -# Name = Floppy -# Media Type = Floppy -# Archive Device = /mnt/floppy +# Name = DDS-4 # +# Media Type = DDS-4 +# Archive Device = @TAPEDRIVE@ +# AutomaticMount = yes; # when device opened, read it +# AlwaysOpen = yes; # RemovableMedia = yes; +# RandomAccess = no; +## Changer Command = "@scriptdir@/mtx-changer %c %o %S %a %d" +## Changer Device = /dev/sg0 +## AutoChanger = yes +# # Enable the Alert command only if you have the mtx package loaded +## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'" +## If you have smartctl, enable this, it has more info than tapeinfo +## Alert Command = "sh -c 'smartctl -H -l error %c'" +#} + +# +# A FreeBSD tape drive +# +#Device { +# Name = DDS-4 +# Description = "DDS-4 for FreeBSD" +# Media Type = DDS-4 +# Archive Device = /dev/nsa1 +# AutomaticMount = yes; # when device opened, read it +# AlwaysOpen = yes +# Offline On Unmount = no +# Hardware End of Medium = no +# BSF at EOM = yes +# Backward Space Record = no +# Fast Forward Space File = no +# TWO EOF = yes +# If you have smartctl, enable this, it has more info than tapeinfo +# Alert Command = "sh -c 'smartctl -H -l error %c'" +#} + +# +# A OnStream tape drive. +# You need the kernel osst driver 0.9.14 or later, and +# do "mt -f /dev/nosst0 defblksize 32768" once as root. +# +#Device { +# Name = OnStream +# Description = "OnStream drive on Linux" +# Media Type = OnStream +# Archive Device = @TAPEDRIVE@ +# AutomaticMount = yes; # when device opened, read it +# AlwaysOpen = yes +# Offline On Unmount = no +## The min/max blocksizes of 32768 are *required* +# Minimum Block Size = 32768 +# Maximum Block Size = 32768 +# If you have smartctl, enable this, it has more info than tapeinfo +# Alert Command = "sh -c 'smartctl -H -l error %c'" +#} + +# +# A DVD device +# +#Device { +# Name = "DVD Writer" +# Media Type = DVD +# Device Type = DVD +# Archive Device = /dev/hdc +# LabelMedia = yes; # lets Bacula label unlabeled media # Random Access = Yes; # AutomaticMount = yes; # when device opened, read it +# RemovableMedia = yes; # AlwaysOpen = no; +# MaximumPartSize = 800M; +# RequiresMount = yes; +# MountPoint = /mnt/cdrom; +# MountCommand = "/bin/mount -t iso9660 -o ro %a %m"; +# UnmountCommand = "/bin/umount %m"; +# SpoolDirectory = /tmp/backup; +# WritePartCommand = "@scriptdir@/dvd-handler %a write %e %v" +# FreeSpaceCommand = "@scriptdir@/dvd-handler %a free" +#} + +# +# For OpenBSD OS >= 3.6 +# +#Device { +# Name = DDS-3 +# Media Type = DDS-3 +# Archive Device = /dev/nrst0 +# Use MTIOCGET= no +# BSF at EOM = yes +# TWO EOF = no +# AutomaticMount = yes; +# AlwaysOpen = yes; +# RemovableMedia = yes; +# RandomAccess = no; +# If you have smartctl, enable this, it has more info than tapeinfo +# Alert Command = "sh -c 'smartctl -H -l error %c'" #} # @@ -82,6 +214,9 @@ Device { # AutomaticMount = yes; # when device opened, read it # AlwaysOpen = Yes; # RemovableMedia = yes; +# RandomAccess = no; +# If you have smartctl, enable this, it has more info than tapeinfo +# Alert Command = "sh -c 'smartctl -H -l error %c'" #} #