X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=bacula%2Ftechnotes-1.39;h=0e6b0395d1cdc93670e407a1ba4a57f4781a71c1;hb=0c4c4ce55844125ac6b079b254636f69a76e742b;hp=a81bb4f30b0a3b4bbfdaa414a80bec09e533f789;hpb=c9551616bc6691b48a2c9094f761243532ff987c;p=bacula%2Fbacula diff --git a/bacula/technotes-1.39 b/bacula/technotes-1.39 index a81bb4f30b..0e6b0395d1 100644 --- a/bacula/technotes-1.39 +++ b/bacula/technotes-1.39 @@ -1,6 +1,518 @@ Technical notes on version 1.39 General: +22Nov06 +kes Cleanup some of the error termination code in migration. +kes Separate read/write source strings to keep track of where + storage devices are used in a job. +kes Implement a new method of keeping track of which storage + device is used in a Job. USTORE keeps both a pointer to the + resource and to the source string. +kes Modify all code to use new storage set subroutines in job.c +kes Modify migrate.c so that the definitive selection of the storage + resource is done in the do_migration_init() routine prior to + the job going into the job queue. This permits accurate + deadlock detection (same read and write storage resource). +kes Remove bfill from btape (I think it was a left over stub). +22Nov06 +kes Make sure that the storage for a job is pulled first from + the Pool and if not from the Job. +kes Ensure that either the Pool or the Job specifies a Storage + resource. +21Nov06 +kes Start applying new FSFE copyright. +20Nov06 +kes Add additional error messages in acquiring a drive for read. +kes Make WritePartAfterJob the default so that the last DVD part + always gets written to the DVD by default. +kes Add additional error messages in migration. +kes Suppress redundant error messages in migration (possibly more to do). +kes Apply Martin's fix (updated to 1.39) that takes into account + run storage overrides in the Director status display. +kes Implement, but turn off the submitted code that sets the EOT + model on FreeBSD machines. Turning on this code is too risky at + this point in the development. +19Nov06 +kes Implement unique dbid routine for migration to prevent the same + JobId from being migrated twice. This should fix bug #709. +18Nov06 +kes Apply Jaime Ventura's 'mail on success' patch. +kes Add a SMALLOC_SANITY_CHECK for Arno, which aborts Bacula + if memory usage gets too big. +kes Tweak migration to ensure that read/write devices are different. +17Nov06 +kes Create an AUTHORS file to list Bacula contributors. +kes Add Richard Stallman's four GPL freedoms to LICENSE +kes Require the conf file to have a valid NextPool for writing the + migration output. +16Nov06 +ebl Enable RecycleCount in catalog. +ebl Fix "echo python | bconsole" segfault +14Nov06 +kes Implement code to pass the MediaId to the SD. The SD then uses + this MediaId when creating JobMedia records. This fixes a bug + with Migration where the MediaId got set to the second Volume + read rather than the write Volume. Possibly (unlikely) fixes + bug #709. +kes Remove NextPool from Job resource. +kes Edit a few numbers in the restore dialog with commas. +kes Note, the DIR<->SD protocol has changed. +13Nov06 +kes Replace () by {} in configure.in for proper HP configuration. +kes Shorten some lines over 80 characters in filed/backup.c +kes Cast sizeof() in filed/backup.c to avoid compiler warning. + +Version 1.39.28 released: +12Nov06 +kes Change error message 'illegal' to 'invalid' -- bug #707 +kes Add rather primitive device resource deadlock detection in + the job queue handler. It detects the same read and write device + for migration and cancels the job. +kes Start adding a unique_dbid_hander() routine in migration to avoid + duplicate mediaids and duplicate jobids. +kes Add patch from bug #708 to permit relative paths such as ../xxx + in the restore tree routine. +kes Add Eric Bollengier's patch to reduce locking time in the SD after + despooling, and thus many jobs finish faster. +kes Correct locking order of reservations lock and device mutex in + reserve.c -- this should correct Arno's deadlock that occurred + when doing mount/unmount at the same time a job is reserving a + drive. +05Nov06 +rbn Fixed problems with encryption when combined with compression + or sparse files. Unfortunately this means that all previous + encrypted backups can't be restored. +rbn Fixed problem in bfgets with Windows and Mac end of lines. +rbn Fixed bug in Windows version of close_bpipe() that cause programs + like bsmtp() to hang waiting for the pipe to be closed. Fixed + binary file type problems in open_bpipe(). +rbn Fixed a number of bugs in the mysql DB scripts. +03Nov06 +ebl Fix broken runscript on director. (RunBefore, RunAfter) +ebl Use M_ERROR instead of M_FATAL in runscript.c +31Oct06 +ebl Small fix src/dird/job.c to add JobErrors count to catalog. +rbn Ignore UTF-8 marker at the start of .conf files. +rbn Add stab2cv to 3rd party dependencies. This is a utility I + wrote that is licensed under the GPL and available on SourceForge. + It converts the stab debugging info generated by gcc into Codeview + format. Currently it just translates function names to global + symbols. This is sufficient to get reasonable stack traces from + Dr Watson and to look at minidumps. +rbn Fix bug # 699 - winbacula client crashes whilerunning bat scripts. +rbn Enable Windows XP look and feel for the tray icons and wx-console. +rbn Add Windows specific FileSet example to bacula-dir.conf. +rbn Reorganize Start menu so that documentation and configuration are + in subfolders. +21Oct06 +rbn Change daemons and utilities so that if -c is omitted from the + command line AND there is no configuration file in the current + directory then the 'standard' configuration file (eg + /etc/bacula/bacula-*.conf) will be used. If the argument to -c + doesn't contain any path separators AND there is no configuration + file by that name in the current directory then the 'standard' + configuration file directory will be searched for a file by that + name. +rbn Fixed restore on Windows so that backslashes as path separators works. +rbn Add missing query.sql file to Windows installer. +rbn Fixed Windows versions of catalog backup scripts. +20Oct06 +kes Fix optional files in Makefile.in of src/filed that caused + a syntax error when using no optional files. +15Oct06 +lf Fix a cosmetic bug in filed.c that caused spurious OpenSSL error + messages; there is no reason to attempt to load a private key. + from master key files. + +Version 1.39.26 released: +12Oct06 +kes Apply the three patches from Richard Mortimer. + bacula-reposition.patch, bacula-tape-reopen.patch, and + bacula-eod.patch. This corrects tape positioning on older devices, + and also a problem with btape. +kes Apply fix from bug report #696 where writing to a FIFO does not + work due to a dumb typo. +kes Unlock the tape door before the file descriptor is released. This + should fix lots of somewhat subtle failures when using an autochanger. +11Oct06 +kes Correct mtx-changer bug that I introduced in a recent commit, and + pointed out by Robert Nelson -- thanks. +rbn Fix Windows' daemons so that messages print to stdout if not + running as a service. +rbn Add daemon name to trace file name (eg bacula-dir.trace). +rbn Fix environment variable expansion in directory names on Windows. +rbn Fix autochanger support in fill command. +rbn Update SQL scripts to match Unix versions. +rbn Fix daemon usage displays. +rbn Cleanup bacula-dir.conf template. +rbn Install openssl.cnf so that the openssl.exe installed in the + Bacula\bin directory can be used to generate keys and + certificates for TLS and encryption. +rbn Fix cleanup of spool files on Windows. +rbn Remove /silent option from daemons on Windows. The new default + is the same as the old /silent. To enable the message boxes that + previously were suppressed by /silent you must add /debug instead. + NOTE: As a result of this change, the first time you upgrade from + a previous version of 1.39.x you will receive the message + boxes when the remove of the old services succeeds. This + is the same behaviour as when migrating from a version prior + to 1.39.0. + However, going forward, these message boxes will not appear on + upgrades or new installs. +rbn Add new /debug option. This option enables the message boxes that + previously were suppressed by the /silent option. In addition the + daemons running as services will open a console window if this + option is used. +rbn Fix bug with service not being removed on migrated installs. This + should correct those cases where the file daemon install was failing + when upgrading from versions prior to 1.39.x. +08Oct06 +kes Turn on heap reporting in Dir with zero debug level. +kes Send a message to the sys log when Bacula forces a SEG FAULT, and + send the same message to stdout. +07Oct06 +kes Begin work on new GUI 'console'. +kes Make configure look in non-standard MySQL library directory + for Solaris. +kes Make mtx-changer automatically configure the autochanger wait + procedure for Solaris, FreeBSD, and Linux. Previously, only Linux + was implemented. +kes Correct drop_sqlite_tables.in script to not delete the database. +kes When writing to a log file, close and reopen the file descriptor + if there is an error writing the file. +kes Modify the autochanger loaded?, load, and unload commands to print + the full text of any mtx output if there is an error. Helps to + ease diagnosis of autochanger problems. +kes Correct a few Win32 errno returns in the VSS code so that hopefully + a resonable Win32 error message will be printed. +kes Convert a few strcat()... to bstrncat() in the Win32 code. +06Oct06 +rbn Added Windows version of bsmtp. +rbn Fixed path search for Windows so that Bacula\bin is automatically + searched for programs and scripts. +rbn Fixed bugs in mtx-changer.cmd and made template bacula-sd.conf + Windows specific. + +Version 1.39.24 released: +02Oct06 +kes Apply dvd find volume patch from Richard Mortimer. +kes Eliminate the dvd specific mount routines using only the + dev->mount/unmount. +kes Make update_free_space a method of DEVICE and rename + update_freespace. +01Oct06 +kes Require a messages command acl to be able to receive messages + in a console. +kes Add console, system, and scan job types in util.c. +28Sep06 +kes Print the Volume purged message only for real jobs to keep + from cluttering up the daemon messages. +kes Lock the tape drive door while Bacula is using the device. +kes Add back the 'No Jobs running' message to FD and SD status because + my regression script depends on it, and I'm too lazy to change the + scripts. +kes Start using structure assignments (not too happy about it ...). +kes Fix a bug in the tools Makefile that broke on Solaris. +kes Unload any autochanger drive during a 'release' command. +26Sep06 +kes Enhance error message when restoring without bootstrap file. +kes Check restored size only for regular files. +kes Store Python job level in job record in Dir. +kes Add back code to open tape device nonblocking, but if rewind fails + release file descriptor. +kes Modify acquire.c to first try autoloading the device. Also, ask operator + to mount tape if drive cannot be opened. +rbn Made Windows service tray status windows resizable. +rbn Fixed horizontal scrolling of text in status window. +rbn Preserve horizontal and vertical scroll position while + updating. This prevents the display being reset to the + top line every 5 seconds. +rbn Fix Windows cross-compile compatibilty problems with + *nix variants such as OS X without the zic command. +rbn Eliminate dependency on man2html. +25Sep06 +kes Update src/win32/dll/bacula.def for change in BPIPE definition for + Win32 build. +kes Fix a compiler warning in compat.cpp +kes Change strcpy to bstrncpy in compat.cpp +kes Remove some broken code in bdb_list.c +kes Fix, hopefully the last, ACL problem in the restore command. +kes Update the README.mingw32 +kes Add new version of upgrade-win32-client.txt to examples directory. + Submitted by Michel Meyers. +kes Print an INFO message in the job report when a Volume is marked Purged. +rbn Fixed handling of external program and script execution + so that the format of the command line is more flexible. + Now executable path names containing spaces are translated + to the equivalent short name automatically. The result is + passed to cmd.exe with the quotes removed. +24Sep06 +kes Apply the recycle patch from Richard Mortimer. +kes Convert a few if statements in dev.c to switch statements. +kes Start using print_errmsg instead of bstrerror(). +kes Print a job message in SD when a job is marked to be canceled. +23Sep06 +kes All code added back. Fixed block.c read/write to loop only 3 + times. This apparently keeps the OS from crashing (at least + most of the time). +kes The kernel bug still persists. Backup something then immediately + do a bscan on the same tape, and the kernel will crash. +kes Simplifed tape open(). It no longer uses nonblocking mode, which + means that opening with no tape loaded will probably take at least + 6 minutes before an error is reported. +kes Do not use MTSETDRVBUFFER if not running as root. Do a MTRESET + when doing set_os_device_parameters. +kes Report open error in mount.c +kes Remove all .exe files from the installer directory on make clean. +20Sep06 +kes Start adding back removed code. +kes Back out a number of changes because backups to tape crash my + system. +kes Remove the inetd code from the File daemon. +18Sep06 +kes Add -c option to pg_dump so that it initializes tables when + restored. +kes Fix FirstWritten time on Volume to be obtained from SD so that + it is the actual time the volume was first written. +kes Minor Makefile changes. +kes Handle EBUSY during read(). Improve how EBUSY is handled in write(). +ebl Add yes keyword to prune/purge command +16Sep06 +kes Correct a test in block.c that prevented restore of a DVD from + looking at the last part in the spool directory. +kes Make some error messages clearer mostly by using the word DVD + in the message. Improve infor message in read_record for DVDs. +kes Remove DVD kludges in dircmd.c label/relabel. +kes Move the dvd relabel code from dircmd.c into + write_new_volume_label_to_dvd() adding a relabel argument. +kes Rewrite the truncate_dvd() code to be much simpler and + more logical. First blow away any spool part, then create a + new empty part and write to the DVD. +kes Rewrite the can_write_on_non_blank_dvd() code making it + only ensure that no valid data is on the DVD -- i.e. it + can be overwritten. +15Sep06 +kes Minor Makefile fixes. +kes Put attach_dcr_to_dev in a subroutine. +kes Make attaching/detaching to/from a device use a flag and + only detach if actually attached. +kes Add dvd-simulator.in to scripts directory and add to configure. +kes Fix code in acquire.c that checks fd != 0 to use dev->is_open(). + This could be a cause of a number of drive reservation problems. + Note, this code is now in attach_dcr_to_dev(). +kes Suppress doing Volume updates if it is a system job. This should + prevent the DVD label blocking. +kes Clear the freespace ok flag in a couple of strategic places. +14Sep06 +kes Put removing zero sized spool part file in subroutine and + call from release_device(). +kes Add Richard's patch for relabel to dircmd.c, but save and restore + dev Volume name. +kes Rework a lot of subroutines in dev.c to take dcr as an + argument. This is done to eliminate the usage of attached_dcrs + in lseek(). +kes Change truncated_dvd to blank_dvd, which seems more suitable. +kes Apply most of Richard Mortimer's truncate patch. +kes Create lseek() method for DEVICE that takes dcr as an + argument. This is to eliminate the use of attached_dcrs in + lseek(). The calls to lseek_dev() must still be changed. +13Sep06 +kes Apply Richard Mortimer's patches for printing an error + message in btape when a DVD is used, and to initialize traceback. +kes Added error message to btape when trying to access a file. +kes Move prototype of update_slots() to protos.h. +12Sep06 +kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus, + and FDJobStatus to the Director Python variables. +kes Make sure valid argument passed to str_to_utime() where Arno + had a seg fault. +kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan. + I.e. part of two different patches. +11Sep06 +kes Modify disk changer to simulate some of the error conditions + of mtx-changer. +kes Make sure the close() call in the SD tools is just before the + getchar() call. +kes Implement dir_get_volume_info() in bls using the patch from + Richard Mortimer but call find_num_dvd_parts(). +kes Implement find_num_dvd_parts() that mounts and scans a DVD + and counts the parts. +kes Move the omode code in open_dvd() up so that the cannot + write on blank disk can check can be bypassed for read mode. + Not yet implemented. +10Sep06 +kes Disable normal data spooling for DVD writing which uses + a different spooling mechanism. +kes Apply patch from Richard Mortimer to ensure that the number + of DVD parts is correctly updated. +rbn Save installer details log in the Bacula directory as + install.log. +rbn Add installer generation of client and storage templates + suitable for @inclusion on the director. +rbn Mark previously installed Win32 components read-only since + deselection doesn't do anything. + +Version 1.39.22 beta released: +08Sep06 +kes Fix logic error in handling error return from mtx-changer + script. +kes Make status from SD aware of -1 (unknown) Slot status. +kes At Eric's suggestion make both the 'slots' and 'drive' commands + to the Storage daemon work even if the drive is busy. +kes Make two separate Win32 menu links for starting bconsole and + wx-console in winbacula.nsi +kes Apply DVD part_spooled patch from Richard Mortimer + richm@oldelvet.org.uk +kes Put installer/Readme.txt into Win32 EOL format for Notebook. +rbn Fixed problems migrating settings from previous releases in + Win32 installer. Add Readme.txt with an option to show it on + the installer Finish page. +07Sep06 +kes Use get_catalog_resource() to open catalog database + to ensure that ACLs are respected and that user is + correctly prompted for database. +kes Integrate multiple console/director patch from + Carsten Paeth calle@calle.in-berlin.de +ebl Add character substitution in Job/JobDefs WriteBootStrap. + You can use now 'WriteBootStrap = '/path/%c_%n.bsr'' +kes Apply patch supplied in bug #656 to pass priority field + in the run dialog to the Director in gnome console +kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully + this will fix bug #627 where Bacula eventually gets + confused about what Volume it wants. +kes Add a new close_part() class in the SD to save the device + state around open/close_part/open for DVD writing. This + should fix the num_dvd_parts getting zeroed as reported by + Richard Mortimer. +kes Apply patch from Richard Mortimer that correct edit code + for debug output of st_size. +ebl Add support of encrypted data stream to bscan. + display data_len instead of data content (may be binary) +06Sep06 +kes Add dev->close() in dir_ask_sysop_to_mount_volume() in + bcopy. Fixes bug #669 reported by Eric. +kes Fix incorrect number of arguments in SQL statement in + sql_get.c as reported by Eric. +kes Manual updates. +kes Update examples directory. +kes Remove unused variable in winservice.cpp +kes Make Win32 make command build installer. +rbn Add new Install Type page, used to select between Automatic + and Custom installs. Automatic installs only prompt for + configuration items that can't be reasonably defaulted. +rbn Added Bacula logo to page headers. +rbn Added Upgrade support + - Configuration and component selection are migrated from + pre-1.39 installs. + - Configuration of upgraded components is preserved and + not prompted for + - Configuration of new components is handled according to + the Automatic / Custom selection. + - Component selection is defaulted to previously selected + components. +rbn Installation of Server components is disabled on + Windows 95, 98 and ME. +rbn Added URLs for support, info and upgrades to Bacula entry + in Add/Remove Programs. +rbn Added Version info to Bacula entry in Add/Remove Programs. +04Sep06 +kes Correct dvd code that breaks tape labeling. +kes Implement Enabled on update slots. +02Sep06 +kes When doing a label, pass the VolBytes back to the Director, + which puts it in the catalog. +kes Print an error message if the user attempts to prune an + archived Volume. +kes Need to start using %ld when sscanfing 32 bit values. +kes Update the free +kes Correct the counting of VolCatBytes for DVDs. +kes Add code to mount.c to require that VolCatBytes corresponds to + what is actually found when doing an append. +kes Update freespace only after writing on the DVD. +kes Remove code that blows away the current part in the spool file. +01Sep06 +kes Apply new dvd-handler patch from Richard Mortimer. +kes Tweak so that debug level 20 shows only DVD commands. +kes Correct spooled_part flag in dev.c close() so that it is cleared + when the spool file is deleted or does not exist. +kes Print part number in read_records when eof hit (restore). +rbn Installer default changed to start services on new install. +31Aug06 +kes Make find with no args in tree restore return error rather than + stopping the selection. Fixes bug #665 +kes Rework DVD writing to ensure that the last part is written + on open_next_part when dealing with a spool file. +kes Correct the lseek_dev() routine to handle end point correctly + (bug introduced by me). +kes Allow part number to exceed num_dvd_parts in lseek_dev(). +rbn Change make_session_key on Windows to use WIN32 APIs to produce + a better seed. +rbn Add new tool scsilist.exe which displays the changer, tape and + CD/DVD (1394, SCSI, SATA, ATAPI) devices and the information required + to add them to bacula-sd.conf. +30Aug06 +kes Apply dvd-handler patch from Richard Mortimer. +kes Apply dvd error check patch from Richard Mortimer. +kes Apply bpipe race patch from Richard Mortimer. +kes Rework how DVD labels are handled and set append only + when part > num_dvd_parts. +27Aug06 +kes Rework many features of DVD writing and reading. Added many error + messages. Most importantly changed part to represent the current + part number base zero. This makes current DVD writing incompatible + with previous version. +26Aug06 +kes Add host:port to connect failure messages to FD and SD from Dir. +kes Add WhereACL to console ACL list. If nothing is specified, only + the default is permitted for restore. Otherwise, *all* allows any + path, or you can specify permitted paths. This should allow control + over where users can restore files. This is untested. +kes Modified message to add a ? (as in loaded?) when querying the autochanger + for what Slot is loaded. +kes Fixed the use of Slot, so that is more correctly maintained, thus + eliminating unneeded duplicate calls to determine what Slot is loaded. +25Aug06 +kes Install man pages with 'make install' +kes wx-console crashes because of differences between Bacula and wxWidgets + malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula + calls. +kes correct improper indenting in wx-console/console_conf.c +kes update wx-console header copyrights +kes Fix bug #658 where wx-console mangles file/directory names containing + commas. +24Aug06 +kes Add Media.Enabled flag to client backups for dotcmds.c +kes Enforce Media.Enabled=1 for a current restore to work. +kes Require restore case 3 to have sqlquery permission to work. +kes Remove obsolete del_MAC sql command. +kes Ensure that bscan creates Volumes with Enabled=1. + +Version 1.39.20 beta released: +22Aug06 +kes Correct missing Client table reference in SQL pointed out by + Marc. +21Aug06 +kes Fix Win32 build (new entrypoint, start baculafd). +20Aug06 +kes Add -n option to bconsole to turn off conio. +kes Print JobIds to be migrated in Job Report. +kes Add additional user supplied notes to the messages part of + bacula-dir.conf concerning multiple email addresses. +kes Fix an incorrect comment pointed out by a user in dvd_handler.in +kes Add more recent Feature requests to Projects file. +19Aug06 +kes Apply Maritn's fix to src/win32/Makefile. +kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x +kes Implement pruning for Migration and migrated jobs. +kes Implement PoolOccupancy migration. +kes Implement PoolTime migration. +16Aug06 +kes If doing a mount, look for a slot, and if specified pass it to + the SD so that it can load the autochanger. +kes Return DVD=1 flag if a label command is done to a DVD. This + permits setting VolParts to 1. +kes Apply DVD patch from Richard Mortimer , but + rework ua_label code based on DVD media type to use DVD flag returned. 15Aug06 kes Eliminate some compile warnings in dird_conf.c kes Format the bytes field in the terminated jobs part of the status @@ -10,7 +522,23 @@ kes When not descending into a directory, print the File= name that triggered it -- makes why not descending a bit clearer. kes Do not unload autochanger when doing a list command -- basic code from Eric Bollengier. -07Aug06 +12Aug06 +rbn Reworked the MinGW32 build-dependencies script, it has been renamed + to build-depkgs-mingw32. It now handles two options -h to display + help and -C to reextract the source and apply the patches. The -C + option is useful for updating the source after new patches are + released. +rbn Moved the 3rd party package URLs to a separate file External-mingw32. + This allows updating to new versions without having to modify the + script and makes it easier to figure out which packages and which + versions are used. +rbn Added a new script build-depkgs-msvc.cmd which does the same thing + as build-depkgs-mingw32 except they are built using Microsoft Visual C + and placed in the depkgs-msvc directory. There is also an + External-msvc file to describe the packages. +08Aug06 +rbn Fix Windows cross-compile compatibilty problems with FreeBSD. +07Aug06 kes Fix bug #462 incorrect error message printed when client script called from File= was not found. kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to @@ -28,13 +556,13 @@ dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages, custom of silently converting all manpages to bzip2 format just before the final packaging step. 05Aug06 -rbn Fixed the Windows Makefiles so that they won't accidently try and +rbn Fixed the Windows Makefiles so that they won't accidentally try and pickup binaries for the Unix build. This allows both the Unix build and the Windows build to be built in the same tree without interfering with each other. rbn Fixed error handling and cleaned up mtx-changer.cmd. rbn Added the rest of the database scripts. These are installed but are - not yet editted for variable replacement. + not yet edited for variable replacement. rbn Broke out the cats functionality from bacula.dll and put into new separate dlls for each database type. At installation time the correct one is copied to bacula_cats.dll. @@ -46,7 +574,7 @@ rbn Added a new sql_cmds.h with all the declarations for the variables rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type() which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in src/cats. -kes Correct improperly formated list command output reported by Dan. +kes Correct improperly formatted list command output reported by Dan. 04Aug06 kes Correct despool time calculation. 03Aug06 @@ -56,7 +584,7 @@ kes Attempt to fix problems with the msg_queue crashing on Solaris when Bacula is terminating, but problems remain. kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS name editing problems with too many \\?\es. -kes Fix some Bacula source code stlye problems in compat.cpp. +kes Fix some Bacula source code style problems in compat.cpp. kes Add debug code to compat.cpp and convert non-Bacula debug code to Bacula style. 02Aug06 @@ -73,7 +601,7 @@ kes Implement %q in bsnprintf.c apparently I forgot it. kes Make disk-changer sed command compatible with FreeBSD. kes Make a first cut at a ReleaseNotes and ChangeLog for a beta release. -kes Make make clean decend into the src/win32 directory. +kes Make make clean descend into the src/win32 directory. kes Fix some #ifdefing so that Solaris and FreeBSD compile sys/stat.h was turned off. kes Use suffix editing for new transfer rate messages. @@ -110,14 +638,14 @@ kes Incremented the version number to signify that all of Robert's code done). kes I rationalized a few of the names of the variables (mainly jcr names) that are used during migration as keeping three different jcrs at the - same time clear in one's head is not easy. + same time clear in ones head is not easy. Version 1.39.17 28Jul06 eb Tweak new runscript feature to work with 1.38.x FDs. eb Correct crypto.c to fix segfault when restoring an encrypted stream on fd which don't use rsa keys. -eb Add yes/no english keywords on localised yes/no questions. +eb Add yes/no English keywords on localized yes/no questions. 27Jul06 kes Several important commits from Robert Nelson for code cleanup and Win32 build. @@ -125,7 +653,7 @@ kes Modify console.c so that when conio is enabled, it converts \n to \n\r before outputting to the console. Hopefully this will fix the problems with expect in Perl that Eric saw. 24Jul06 -kes Change cats/sql.c to elimate %-*s format, which I think is turned +kes Change cats/sql.c to eliminate %-*s format, which I think is turned off in bsnprintf. kes Add Comment field to llist of a volume. kes Allow true/false in some yes/no questions. @@ -222,8 +750,8 @@ kes Rename the cram_md5 routine names to be slightly more appropriate to what they are doing (challenge and respond). kes Robert committed his #ifdef and header cleanup. 30Jun06 -kes Fix a complier warning in files/backup.c -kes Cleanup NOT NULL vs DEFALT 0 in database creation. +kes Fix a compiler warning in files/backup.c +kes Cleanup NOT NULL vs DEFAULT 0 in database creation. kes Tweak btape. kes Robert committed his low impact changes. kes I removed a size_t from the jcr.h definition. @@ -273,7 +801,7 @@ kes Harden authentication failure in FD by single threading errors and forcing a 6 second wait. ===================== Warning ============================= - Removed "Accept Any Volume" directive. + Removed 'Accept Any Volume' directive. =========================================================== kes Major cleanup and simplification of regress using shell functions @@ -375,7 +903,7 @@ kes Apply patch from adioso bug #616 to correct text in manual (replace kes Rework a few of the zlib changes so that they build properly. 21May06 -kes Move DIR "run" command to SD before starting the message thread +kes Move DIR 'run' command to SD before starting the message thread as suggested by Cristopher Hull to avoid a race deadlock from two threads using the bsock structure. kes Modify LICENSE to correct some problems pointed out by Debian. @@ -863,7 +1391,7 @@ kes Simplify code in askdir.c that waits for creating an appendable volume so that it can handle multiple returns from the wait code. kes Modify the wait code to permit multiple returns. -kes Return a zero when "autochanger drives" is called and +kes Return a zero when 'autochanger drives' is called and it is not an autochanger. kes Make rewind_dev() a method taking a DCR as an argument. This permits closing and reopening the drive if the @@ -959,7 +1487,7 @@ kes Remove warning message about multiple saves of hardlinked files from find_one.c as it can generate too many warning messages. kes Modify most restore error messages to be queued so that they appear at the end of the job rather than mixted with the restore - listing where they could be "lost". + listing where they could be 'lost'. 06Dec05 kes Reset timeout values before select() per patch from Frank Sweetser for problems with non-blocking sockets. @@ -983,9 +1511,9 @@ kes Rework reservation algorithm so that two drives can be used kes Landon merged his data encription changes into the HEAD kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at If this patch is applied, the number of days can be specified with - "list nextvol days=xx" + 'list nextvol days=xx' or - "status dir days=xx" + 'status dir days=xx' My use case is to be able to preview the next scheduled job (and the next tape to be used) on fridays if there are no scheduled jobs during the weekend.