X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=board%2Famcc%2Fmakalu%2Finit.S;h=4d0f4609e62fa701fbdd8051c0bbcaa9f90d8217;hb=52eb2c79110151b9017a0829c4d44ee7b8e2ca04;hp=57c1774e028bb7de6583347b3c7bb2996d777252;hpb=4985ca5af3767ffe13ea96e1dc26f88c81084414;p=u-boot

diff --git a/board/amcc/makalu/init.S b/board/amcc/makalu/init.S
index 57c1774e02..4d0f4609e6 100644
--- a/board/amcc/makalu/init.S
+++ b/board/amcc/makalu/init.S
@@ -1,8 +1,11 @@
 /*
- * (C) Copyright 2007
+ * Copyright (c) 2008 Nuovation System Designs, LLC
+ *   Grant Erickson <gerickson@nuovations.com>
+ *
+ * (C) Copyright 2007-2008
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
- * Based on code provided from Senao and AMCC
+ * Originally based on code provided from Senao and AMCC
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -23,126 +26,6 @@
  * MA 02111-1307 USA
  */
 
-#include <config.h>
-#include <ppc4xx.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#define mtsdram_as(reg, value)	 	\
-	addi    r4,0,reg	;     	\
-	mtdcr   memcfga,r4	;	\
-	addis   r4,0,value@h 	;	\
-	ori     r4,r4,value@l	;	\
-	mtdcr   memcfgd,r4	;
-
 	.globl  ext_bus_cntlr_init
 ext_bus_cntlr_init:
-
-	/*
-	 * DDR2 setup
-	 */
-
-	/* Following the DDR Core Manual, here is the initialization */
-
-	/* Step 1 */
-
-	/* Step 2 */
-
-	/* Step 3 */
-
-	/* base=00000000, size=128MByte (5), mode=2 (n*10*4) */
-	mtsdram_as(SDRAM_MB0CF, 0x00005201);
-
-	/* base=08000000, size=128MByte (5), mode=2 (n*10*4) */
-	mtsdram_as(SDRAM_MB1CF, (0x08000000 >> 3) | 0x5201);
-
-	/* SDRAM_CLKTR: Adv Addr clock by 90 deg */
-	mtsdram_as(SDRAM_CLKTR,0x80000000);
-
-	/* Refresh Time register (0x30) Refresh every 7.8125uS */
-	mtsdram_as(SDRAM_RTR, 0x06180000);
-
-	/* SDRAM_SDTR1 */
-	mtsdram_as(SDRAM_SDTR1, 0x80201000);
-
-	/* SDRAM_SDTR2	*/
-	mtsdram_as(SDRAM_SDTR2, 0x32204232);
-
-	/* SDRAM_SDTR3	*/
-	mtsdram_as(SDRAM_SDTR3, 0x080b0d1a);
-
-	mtsdram_as(SDRAM_MMODE, 0x00000442);
-	mtsdram_as(SDRAM_MEMODE, 0x00000404);
-
-	/* SDRAM0_MCOPT1 (0X20) No ECC Gen */
-	mtsdram_as(SDRAM_MCOPT1, 0x04322000);
-
-	/* NOP */
-	mtsdram_as(SDRAM_INITPLR0, 0xa8380000);
-	/* precharge 3 DDR clock cycle */
-	mtsdram_as(SDRAM_INITPLR1, 0x81900400);
-	/* EMR2 twr = 2tck */
-	mtsdram_as(SDRAM_INITPLR2, 0x81020000);
-	/* EMR3  twr = 2tck */
-	mtsdram_as(SDRAM_INITPLR3, 0x81030000);
-	/* EMR DLL ENABLE twr = 2tck */
-	mtsdram_as(SDRAM_INITPLR4, 0x81010404);
-	/* MR w/ DLL reset
-	 * Note: 5 is CL.  May need to be changed
-	 */
-	mtsdram_as(SDRAM_INITPLR5, 0x81000542);
-	/* precharge 3 DDR clock cycle */
-	mtsdram_as(SDRAM_INITPLR6, 0x81900400);
-	/* Auto-refresh trfc = 26tck */
-	mtsdram_as(SDRAM_INITPLR7, 0x8D080000);
-	/* Auto-refresh trfc = 26tck */
-	mtsdram_as(SDRAM_INITPLR8, 0x8D080000);
-	/* Auto-refresh */
-	mtsdram_as(SDRAM_INITPLR9, 0x8D080000);
-	/* Auto-refresh */
-	mtsdram_as(SDRAM_INITPLR10, 0x8D080000);
-	/* MRS - normal operation; wait 2 cycle (set wait to tMRD) */
-	mtsdram_as(SDRAM_INITPLR11, 0x81000442);
-	mtsdram_as(SDRAM_INITPLR12, 0x81010780);
-	mtsdram_as(SDRAM_INITPLR13, 0x81010400);
-	mtsdram_as(SDRAM_INITPLR14, 0x00000000);
-	mtsdram_as(SDRAM_INITPLR15, 0x00000000);
-
-	/* SET MCIF0_CODT   Die Termination On */
-	mtsdram_as(SDRAM_CODT, 0x0080f837);
-	mtsdram_as(SDRAM_MODT0, 0x01800000);
-#if 0 /* test-only: not sure if 0 is ok when 2nd bank is used */
-	mtsdram_as(SDRAM_MODT1, 0x00000000);
-#endif
-
-	mtsdram_as(SDRAM_WRDTR, 0x00000000);
-
-	/* SDRAM0_MCOPT2 (0X21) Start initialization */
-	mtsdram_as(SDRAM_MCOPT2, 0x20000000);
-
-	/* Step 5 */
-	lis     r3,0x1	/* 400000 =  wait 100ms */
-	mtctr   r3
-
-pll_wait:
-	bdnz	pll_wait
-
-	/* Step 6 */
-
-	/* SDRAM_DLCR */
-	mtsdram_as(SDRAM_DLCR, 0x030000a5);
-
-	/* SDRAM_RDCC */
-	mtsdram_as(SDRAM_RDCC, 0x40000000);
-
-	/* SDRAM_RQDC */
-	mtsdram_as(SDRAM_RQDC, 0x80000038);
-
-	/* SDRAM_RFDC */
-	mtsdram_as(SDRAM_RFDC, 0x00000209);
-
-	/* Enable memory controller */
-	mtsdram_as(SDRAM_MCOPT2, 0x28000000);
-
 	blr