X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=board%2Fat91rm9200dk%2Fflash.c;h=f6228ef03e4511de21daec2b6a62c72c4220a299;hb=70a2047ff6f0391dddd5f23a715bb610210b1462;hp=6497f11ca47066d2ad753d23db6e45c9260ba075;hpb=dc7c9a1a52403093b9e4aef14ac4c5c014386e57;p=u-boot diff --git a/board/at91rm9200dk/flash.c b/board/at91rm9200dk/flash.c index 6497f11ca4..f6228ef03e 100644 --- a/board/at91rm9200dk/flash.c +++ b/board/at91rm9200dk/flash.c @@ -31,11 +31,42 @@ ulong myflush(void); -#define FLASH_BANK_SIZE 0x200000 /* 2 MB */ -#define MAIN_SECT_SIZE 0x10000 /* 64 KB */ +/* Flash Organization Structure */ +typedef struct OrgDef +{ + unsigned int sector_number; + unsigned int sector_size; +} OrgDef; + + +/* Flash Organizations */ +OrgDef OrgAT49BV16x4[] = +{ + { 8, 8*1024 }, /* 8 * 8 kBytes sectors */ + { 2, 32*1024 }, /* 2 * 32 kBytes sectors */ + { 30, 64*1024 }, /* 30 * 64 kBytes sectors */ +}; + +OrgDef OrgAT49BV16x4A[] = +{ + { 8, 8*1024 }, /* 8 * 8 kBytes sectors */ + { 31, 64*1024 }, /* 31 * 64 kBytes sectors */ +}; + +OrgDef OrgAT49BV6416[] = +{ + { 8, 8*1024 }, /* 8 * 8 kBytes sectors */ + { 127, 64*1024 }, /* 127 * 64 kBytes sectors */ +}; flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; +/* AT49BV1614A Codes */ +#define FLASH_CODE1 0xAA +#define FLASH_CODE2 0x55 +#define ID_IN_CODE 0x90 +#define ID_OUT_CODE 0xF0 + #define CMD_READ_ARRAY 0x00F0 #define CMD_UNLOCK1 0x00AA @@ -44,6 +75,7 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; #define CMD_ERASE_CONFIRM 0x0030 #define CMD_PROGRAM 0x00A0 #define CMD_UNLOCK_BYPASS 0x0020 +#define CMD_SECTOR_UNLOCK 0x0070 #define MEM_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00005555<<1))) #define MEM_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00002AAA<<1))) @@ -59,339 +91,414 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /*----------------------------------------------------------------------- */ - -ulong flash_init(void) +void flash_identification (flash_info_t * info) { - int i, j; - ulong size = 0; - - for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) - { - ulong flashbase = 0; - flash_info[i].flash_id = - (ATM_MANUFACT & FLASH_VENDMASK) | - (ATM_ID_BV1614 & FLASH_TYPEMASK); - flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CFG_MAX_FLASH_SECT; - memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); - if (i == 0) - flashbase = PHYS_FLASH_1; - else - panic("configured to many flash banks!\n"); - for (j = 0; j < flash_info[i].sector_count; j++) - { - - if (j <= 9) - { - /* 1st to 8th are 8 KB */ - if (j <= 7) - { - flash_info[i].start[j] = flashbase + j*0x2000; - } + volatile u16 manuf_code, device_code, add_device_code; + + MEM_FLASH_ADDR1 = FLASH_CODE1; + MEM_FLASH_ADDR2 = FLASH_CODE2; + MEM_FLASH_ADDR1 = ID_IN_CODE; + + manuf_code = *(volatile u16 *) CFG_FLASH_BASE; + device_code = *(volatile u16 *) (CFG_FLASH_BASE + 2); + add_device_code = *(volatile u16 *) (CFG_FLASH_BASE + (3 << 1)); + + MEM_FLASH_ADDR1 = FLASH_CODE1; + MEM_FLASH_ADDR2 = FLASH_CODE2; + MEM_FLASH_ADDR1 = ID_OUT_CODE; + + /* Vendor type */ + info->flash_id = ATM_MANUFACT & FLASH_VENDMASK; + printf ("Atmel: "); - /* 9th and 10th are both 32 KB */ - if ((j == 8) || (j == 9)) - { - flash_info[i].start[j] = flashbase + 0x10000 + (j-8)*0x8000; + if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV1614 & FLASH_TYPEMASK)) { + + if ((add_device_code & FLASH_TYPEMASK) == + (ATM_ID_BV1614A & FLASH_TYPEMASK)) { + info->flash_id |= ATM_ID_BV1614A & FLASH_TYPEMASK; + printf ("AT49BV1614A (16Mbit)\n"); + } else { /* AT49BV1614 Flash */ + info->flash_id |= ATM_ID_BV1614 & FLASH_TYPEMASK; + printf ("AT49BV1614 (16Mbit)\n"); } - } - else - { - flash_info[i].start[j] = flashbase + (j-8)*MAIN_SECT_SIZE; - } + + } else if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV6416 & FLASH_TYPEMASK)) { + info->flash_id |= ATM_ID_BV6416 & FLASH_TYPEMASK; + printf ("AT49BV6416 (64Mbit)\n"); } - size += flash_info[i].size; - } +} - flash_protect(FLAG_PROTECT_SET, - CFG_FLASH_BASE, - CFG_ENV_ADDR - 1, - &flash_info[0]); +ushort flash_number_sector(OrgDef *pOrgDef, unsigned int nb_blocks) +{ + int i, nb_sectors = 0; - flash_protect(FLAG_PROTECT_SET, - CFG_ENV_ADDR, - CFG_ENV_ADDR + CFG_ENV_SIZE - 1, - &flash_info[0]); + for (i=0; iflash_id & FLASH_VENDMASK) - { - case (ATM_MANUFACT & FLASH_VENDMASK): - printf("Atmel: "); - break; - default: - printf("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) - { - case (ATM_ID_BV1614 & FLASH_TYPEMASK): - printf("AT49BV1614 (16Mbit)\n"); - break; - default: - printf("Unknown Chip Type\n"); - goto Done; - break; - } - - printf(" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf(" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) - { - if ((i % 5) == 0) - { - printf ("\n "); - } - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); + volatile u16 *addr = (volatile u16 *) (info->start[sector]); -Done: + MEM_FLASH_ADDR1 = CMD_UNLOCK1; + *addr = CMD_SECTOR_UNLOCK; } -/*----------------------------------------------------------------------- - */ -int flash_erase (flash_info_t *info, int s_first, int s_last) +ulong flash_init (void) { - ulong result; - int iflag, cflag, prot, sect; - int rc = ERR_OK; - int chip1; + int i, j, k; + unsigned int flash_nb_blocks, sector; + unsigned int start_address; + OrgDef *pOrgDef; + + ulong size = 0; + + for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { + ulong flashbase = 0; + + flash_identification (&flash_info[i]); - /* first look for protection bits */ + if ((flash_info[i].flash_id & FLASH_TYPEMASK) == + (ATM_ID_BV1614 & FLASH_TYPEMASK)) { - if (info->flash_id == FLASH_UNKNOWN) - return ERR_UNKNOWN_FLASH_TYPE; + pOrgDef = OrgAT49BV16x4; + flash_nb_blocks = sizeof (OrgAT49BV16x4) / sizeof (OrgDef); + } else if ((flash_info[i].flash_id & FLASH_TYPEMASK) == + (ATM_ID_BV1614A & FLASH_TYPEMASK)){ /* AT49BV1614A Flash */ - if ((s_first < 0) || (s_first > s_last)) { - return ERR_INVAL; - } + pOrgDef = OrgAT49BV16x4A; + flash_nb_blocks = sizeof (OrgAT49BV16x4A) / sizeof (OrgDef); + } else if ((flash_info[i].flash_id & FLASH_TYPEMASK) == + (ATM_ID_BV6416 & FLASH_TYPEMASK)){ /* AT49BV6416 Flash */ - if ((info->flash_id & FLASH_VENDMASK) != - (ATM_MANUFACT & FLASH_VENDMASK)) { - return ERR_UNKNOWN_FLASH_VENDOR; - } + pOrgDef = OrgAT49BV6416; + flash_nb_blocks = sizeof (OrgAT49BV6416) / sizeof (OrgDef); + } else { + flash_nb_blocks = 0; + pOrgDef = OrgAT49BV16x4; + } + + flash_info[i].sector_count = flash_number_sector(pOrgDef, flash_nb_blocks); + memset (flash_info[i].protect, 0, flash_info[i].sector_count); + + if (i == 0) + flashbase = PHYS_FLASH_1; + else + panic ("configured too many flash banks!\n"); - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; + sector = 0; + start_address = flashbase; + flash_info[i].size = 0; + + for (j = 0; j < flash_nb_blocks; j++) { + for (k = 0; k < pOrgDef[j].sector_number; k++) { + flash_info[i].start[sector++] = start_address; + start_address += pOrgDef[j].sector_size; + flash_info[i].size += pOrgDef[j].sector_size; + } + } + + size += flash_info[i].size; + + if ((flash_info[i].flash_id & FLASH_TYPEMASK) == + (ATM_ID_BV6416 & FLASH_TYPEMASK)){ /* AT49BV6416 Flash */ + + /* Unlock all sectors at reset */ + for (j=0; jprotect[sect] == 0) - { /* not protected */ - volatile u16 *addr = (volatile u16 *)(info->start[sect]); + /* Protect U-Boot gzipped image */ + flash_protect (FLAG_PROTECT_SET, + CFG_U_BOOT_BASE, + CFG_U_BOOT_BASE + CFG_U_BOOT_SIZE - 1, &flash_info[0]); - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; + return size; +} - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - *addr = CMD_ERASE_CONFIRM; +/*----------------------------------------------------------------------- + */ +void flash_print_info (flash_info_t * info) +{ + int i; + + switch (info->flash_id & FLASH_VENDMASK) { + case (ATM_MANUFACT & FLASH_VENDMASK): + printf ("Atmel: "); + break; + default: + printf ("Unknown Vendor "); + break; + } - /* wait until flash is ready */ - chip1 = 0; + switch (info->flash_id & FLASH_TYPEMASK) { + case (ATM_ID_BV1614 & FLASH_TYPEMASK): + printf ("AT49BV1614 (16Mbit)\n"); + break; + case (ATM_ID_BV1614A & FLASH_TYPEMASK): + printf ("AT49BV1614A (16Mbit)\n"); + break; + case (ATM_ID_BV6416 & FLASH_TYPEMASK): + printf ("AT49BV6416 (64Mbit)\n"); + break; + default: + printf ("Unknown Chip Type\n"); + return; + } - do - { - result = *addr; + printf (" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); - /* check timeout */ - if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) - { - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - chip1 = TMO; - break; + printf (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; i++) { + if ((i % 5) == 0) { + printf ("\n "); } + printf (" %08lX%s", info->start[i], + info->protect[i] ? " (RO)" : " "); + } + printf ("\n"); +} - if (!chip1 && (result & 0xFFFF) & BIT_ERASE_DONE) - chip1 = READY; +/*----------------------------------------------------------------------- + */ - } while (!chip1); +int flash_erase (flash_info_t * info, int s_first, int s_last) +{ + ulong result; + int iflag, cflag, prot, sect; + int rc = ERR_OK; + int chip1; - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; + /* first look for protection bits */ - if (chip1 == ERR) - { - rc = ERR_PROG_ERROR; - goto outahere; - } - if (chip1 == TMO) - { - rc = ERR_TIMOUT; - goto outahere; - } - - printf("ok.\n"); + if (info->flash_id == FLASH_UNKNOWN) + return ERR_UNKNOWN_FLASH_TYPE; + + if ((s_first < 0) || (s_first > s_last)) { + return ERR_INVAL; } - else /* it was protected */ - { - printf("protected!\n"); + + if ((info->flash_id & FLASH_VENDMASK) != + (ATM_MANUFACT & FLASH_VENDMASK)) { + return ERR_UNKNOWN_FLASH_VENDOR; } - } - if (ctrlc()) - printf("User Interrupt!\n"); + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + if (prot) + return ERR_PROTECTED; + + /* + * Disable interrupts which might cause a timeout + * here. Remember that our exception vectors are + * at address 0 in the flash, and we don't want a + * (ticker) exception to happen while the flash + * chip is in programming mode. + */ + cflag = icache_status (); + icache_disable (); + iflag = disable_interrupts (); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { + printf ("Erasing sector %2d ... ", sect); + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); + + if (info->protect[sect] == 0) { /* not protected */ + volatile u16 *addr = (volatile u16 *) (info->start[sect]); + + MEM_FLASH_ADDR1 = CMD_UNLOCK1; + MEM_FLASH_ADDR2 = CMD_UNLOCK2; + MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; + + MEM_FLASH_ADDR1 = CMD_UNLOCK1; + MEM_FLASH_ADDR2 = CMD_UNLOCK2; + *addr = CMD_ERASE_CONFIRM; + + /* wait until flash is ready */ + chip1 = 0; + + do { + result = *addr; + + /* check timeout */ + if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { + MEM_FLASH_ADDR1 = CMD_READ_ARRAY; + chip1 = TMO; + break; + } + + if (!chip1 && (result & 0xFFFF) & BIT_ERASE_DONE) + chip1 = READY; + + } while (!chip1); + + MEM_FLASH_ADDR1 = CMD_READ_ARRAY; + + if (chip1 == ERR) { + rc = ERR_PROG_ERROR; + goto outahere; + } + if (chip1 == TMO) { + rc = ERR_TIMOUT; + goto outahere; + } + + printf ("ok.\n"); + } else { /* it was protected */ + printf ("protected!\n"); + } + } + + if (ctrlc ()) + printf ("User Interrupt!\n"); outahere: - /* allow flash to settle - wait 10 ms */ - udelay_masked(10000); + /* allow flash to settle - wait 10 ms */ + udelay_masked (10000); - if (iflag) - enable_interrupts(); + if (iflag) + enable_interrupts (); - if (cflag) - icache_enable(); + if (cflag) + icache_enable (); - return rc; + return rc; } /*----------------------------------------------------------------------- * Copy memory to flash */ -volatile static int write_word (flash_info_t *info, ulong dest, ulong data) +volatile static int write_word (flash_info_t * info, ulong dest, + ulong data) { - volatile u16 *addr = (volatile u16 *)dest; - ulong result; - int rc = ERR_OK; - int cflag, iflag; - int chip1; - - /* - * Check if Flash is (sufficiently) erased - */ - result = *addr; - if ((result & data) != data) - return ERR_NOT_ERASED; - - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - cflag = icache_status(); - icache_disable(); - iflag = disable_interrupts(); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_PROGRAM; - *addr = data; - - /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); - - /* wait until flash is ready */ - chip1 = 0; - do - { + volatile u16 *addr = (volatile u16 *) dest; + ulong result; + int rc = ERR_OK; + int cflag, iflag; + int chip1; + + /* + * Check if Flash is (sufficiently) erased + */ result = *addr; + if ((result & data) != data) + return ERR_NOT_ERASED; + + + /* + * Disable interrupts which might cause a timeout + * here. Remember that our exception vectors are + * at address 0 in the flash, and we don't want a + * (ticker) exception to happen while the flash + * chip is in programming mode. + */ + cflag = icache_status (); + icache_disable (); + iflag = disable_interrupts (); + + MEM_FLASH_ADDR1 = CMD_UNLOCK1; + MEM_FLASH_ADDR2 = CMD_UNLOCK2; + MEM_FLASH_ADDR1 = CMD_PROGRAM; + *addr = data; - /* check timeout */ - if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) - { - chip1 = ERR | TMO; - break; - } - if (!chip1 && ((result & 0x80) == (data & 0x80))) - chip1 = READY; + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); + + /* wait until flash is ready */ + chip1 = 0; + do { + result = *addr; - } while (!chip1); + /* check timeout */ + if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { + chip1 = ERR | TMO; + break; + } + if (!chip1 && ((result & 0x80) == (data & 0x80))) + chip1 = READY; - *addr = CMD_READ_ARRAY; + } while (!chip1); - if (chip1 == ERR || *addr != data) - rc = ERR_PROG_ERROR; + *addr = CMD_READ_ARRAY; + + if (chip1 == ERR || *addr != data) + rc = ERR_PROG_ERROR; - if (iflag) - enable_interrupts(); + if (iflag) + enable_interrupts (); - if (cflag) - icache_enable(); + if (cflag) + icache_enable (); - return rc; + return rc; } /*----------------------------------------------------------------------- * Copy memory to flash. */ -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) +int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) { - ulong wp, data; - int rc; + ulong wp, data; + int rc; - if(addr & 1) { - printf("unaligned destination not supported\n"); - return ERR_ALIGN; - }; + if (addr & 1) { + printf ("unaligned destination not supported\n"); + return ERR_ALIGN; + }; - if((int)src & 1) { - printf("unaligned source not supported\n"); - return ERR_ALIGN; - }; + if ((int) src & 1) { + printf ("unaligned source not supported\n"); + return ERR_ALIGN; + }; - wp = addr; + wp = addr; - while (cnt >= 2) { - data = *((volatile u16*)src); - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - src += 2; - wp += 2; - cnt -= 2; - } - - if(cnt == 1) { - data = (*((volatile u8*)src)) | (*((volatile u8*)(wp+1)) << 8); - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); + while (cnt >= 2) { + data = *((volatile u16 *) src); + if ((rc = write_word (info, wp, data)) != 0) { + return (rc); + } + src += 2; + wp += 2; + cnt -= 2; } - src += 1; - wp += 1; - cnt -= 1; - }; - return ERR_OK; + if (cnt == 1) { + data = (*((volatile u8 *) src)) | (*((volatile u8 *) (wp + 1)) << + 8); + if ((rc = write_word (info, wp, data)) != 0) { + return (rc); + } + src += 1; + wp += 1; + cnt -= 1; + }; + + return ERR_OK; }