X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=board%2Fbuffalo%2Flsxl%2Flsxl.c;h=0f3734587a5d83cac741592437f7b81f858b6ebf;hb=0e030593962d15aece45b2fa0401ee27d0d7ab96;hp=f2980204c8d9ec331e93a43319919e3139878657;hpb=9d86f0c30bd7e6a7f7a93bc7f12b69ef48a4de19;p=u-boot

diff --git a/board/buffalo/lsxl/lsxl.c b/board/buffalo/lsxl/lsxl.c
index f2980204c8..0f3734587a 100644
--- a/board/buffalo/lsxl/lsxl.c
+++ b/board/buffalo/lsxl/lsxl.c
@@ -5,23 +5,7 @@
  * Based on sheevaplug/sheevaplug.c by
  *   Marvell Semiconductor <www.marvell.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #include <common.h>
@@ -29,11 +13,12 @@
 #include <malloc.h>
 #include <netdev.h>
 #include <miiphy.h>
-#include <asm/arch/kirkwood.h>
+#include <spi.h>
+#include <spi_flash.h>
+#include <asm/arch/soc.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/mpp.h>
 #include <asm/arch/gpio.h>
-#include <spi_flash.h>
 
 #include "lsxl.h"
 
@@ -49,9 +34,8 @@
  * you can do this only with a working network connection. Therefore, a random
  * ethernet address is generated if none is set and a DHCP request is sent.
  * After a successful DHCP response is received, the network settings are
- * configured and the ncip parameter is set to the serverip. Eg. for a working
- * resuce mode, you should set 'next-server' to the host where the netconsole
- * client is started.
+ * configured and the ncip is unset. Therefore, all netconsole packets are
+ * broadcasted.
  * Additionally, the bootsource is set to 'rescue'.
  */
 
@@ -68,9 +52,9 @@ int board_early_init_f(void)
 	 * There are maximum 64 gpios controlled through 2 sets of registers
 	 * the below configuration configures mainly initial LED status
 	 */
-	kw_config_gpio(LSXL_OE_VAL_LOW,
-			LSXL_OE_VAL_HIGH,
-			LSXL_OE_LOW, LSXL_OE_HIGH);
+	mvebu_config_gpio(LSXL_OE_VAL_LOW,
+			  LSXL_OE_VAL_HIGH,
+			  LSXL_OE_LOW, LSXL_OE_HIGH);
 
 	/*
 	 * Multi-Purpose Pins Functionality configuration
@@ -184,7 +168,7 @@ static void set_led(int state)
 int board_init(void)
 {
 	/* address of boot parameters */
-	gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
+	gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
 
 	set_led(LED_POWER_BLINKING);
 
@@ -243,19 +227,7 @@ static void erase_environment(void)
 
 static void rescue_mode(void)
 {
-	uchar enetaddr[6];
-
 	printf("Entering rescue mode..\n");
-#ifdef CONFIG_RANDOM_MACADDR
-	if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
-		eth_random_enetaddr(enetaddr);
-		if (eth_setenv_enetaddr("ethaddr", enetaddr)) {
-			printf("Failed to set ethernet address\n");
-				set_led(LED_ALARM_BLINKING);
-			return;
-		}
-	}
-#endif
 	setenv("bootsource", "rescue");
 }