X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=board%2Fdavinci%2Fcommon%2Fmisc.c;h=6103339216dd3ef893967220a0df40764254ea29;hb=a55d23ccf6cb90acb9667a46427670add9486aec;hp=b60a46e96d2d60b5612f0ef6426420ca8ba84196;hpb=655c54975296002587c705e05c23754edb121c2c;p=u-boot diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c index b60a46e96d..6103339216 100644 --- a/board/davinci/common/misc.c +++ b/board/davinci/common/misc.c @@ -29,24 +29,16 @@ #include #include #include -#include "misc.h" +#include DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -int dram_init(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return(0); -} -#else +#ifndef CONFIG_PRELOADER int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ gd->ram_size = get_ram_size( - (volatile void *)CONFIG_SYS_SDRAM_BASE, + (void *)CONFIG_SYS_SDRAM_BASE, CONFIG_MAX_RAM_BANK_SIZE); return 0; } @@ -85,6 +77,22 @@ err: return 0; } +/* + * Set the mii mode as MII or RMII + */ +#if defined(CONFIG_SOC_DA8XX) +void davinci_emac_mii_mode_sel(int mode_sel) +{ + int val; + + val = readl(&davinci_syscfg_regs->cfgchip3); + if (mode_sel == 0) + val &= ~(1 << 8); + else + val |= (1 << 8); + writel(val, &davinci_syscfg_regs->cfgchip3); +} +#endif /* * If there is no MAC address in the environment, then it will be initialized * (silently) from the value in the EEPROM. @@ -104,79 +112,38 @@ void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr) } } -#endif /* DAVINCI_EMAC */ +#endif /* CONFIG_DRIVER_TI_EMAC */ -/* - * Change the setting of a pin multiplexer field. - * - * Takes an array of pinmux settings similar to: - * - * struct pinmux_config uart_pins[] = { - * { &davinci_syscfg_regs->pinmux[8], 2, 7 }, - * { &davinci_syscfg_regs->pinmux[9], 2, 0 } - * }; - * - * Stepping through the array, each pinmux[n] register has the given value - * set in the pin mux field specified. - * - * The number of pins in the array must be passed (ARRAY_SIZE can provide - * this value conveniently). - * - * Returns 0 if all field numbers and values are in the correct range, - * else returns -1. - */ -int davinci_configure_pin_mux(const struct pinmux_config *pins, - const int n_pins) +#if defined(CONFIG_SOC_DA8XX) +#ifndef CONFIG_USE_IRQ +void irq_init(void) { - int i; + /* + * Mask all IRQs by clearing the global enable and setting + * the enable clear for all the 90 interrupts. + */ - /* check for invalid pinmux values */ - for (i = 0; i < n_pins; i++) { - if (pins[i].field >= PIN_MUX_NUM_FIELDS || - (pins[i].value & ~PIN_MUX_FIELD_MASK) != 0) - return -1; - } + writel(0, &davinci_aintc_regs->ger); - /* configure the pinmuxes */ - for (i = 0; i < n_pins; i++) { - const int offset = pins[i].field * PIN_MUX_FIELD_SIZE; - const unsigned int value = pins[i].value << offset; - const unsigned int mask = PIN_MUX_FIELD_MASK << offset; - const dv_reg *mux = pins[i].mux; + writel(0, &davinci_aintc_regs->hier); - writel(value | (readl(mux) & (~mask)), mux); - } - - return 0; + writel(0xffffffff, &davinci_aintc_regs->ecr1); + writel(0xffffffff, &davinci_aintc_regs->ecr2); + writel(0xffffffff, &davinci_aintc_regs->ecr3); } +#endif /* - * Configure multiple pinmux resources. - * - * Takes an pinmux_resource array of pinmux_config and pin counts: - * - * const struct pinmux_resource pinmuxes[] = { - * PINMUX_ITEM(uart_pins), - * PINMUX_ITEM(i2c_pins), - * }; - * - * The number of items in the array must be passed (ARRAY_SIZE can provide - * this value conveniently). - * - * Each item entry is configured in the defined order. If configuration - * of any item fails, -1 is returned and none of the following items are - * configured. On success, 0 is returned. + * Enable PSC for various peripherals. */ -int davinci_configure_pin_mux_items(const struct pinmux_resource *item, +int da8xx_configure_lpsc_items(const struct lpsc_resource *item, const int n_items) { int i; - for (i = 0; i < n_items; i++) { - if (davinci_configure_pin_mux(item[i].pins, - item[i].n_pins) != 0) - return -1; - } + for (i = 0; i < n_items; i++) + lpsc_on(item[i].lpsc_no); return 0; } +#endif