X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=board%2Fdavinci%2Fcommon%2Fmisc.c;h=fa9dd9fe4d0b830aaf14127ec61cbab1002c9f03;hb=17dd883c5b76bdade0f7a48f2eb02d918a5ebef9;hp=25ca326500758e1b2df91572e14cddf684c4d631;hpb=2ff6922280025c1315c53fa2eb4ab33f0c9591de;p=u-boot

diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c
index 25ca326500..fa9dd9fe4d 100644
--- a/board/davinci/common/misc.c
+++ b/board/davinci/common/misc.c
@@ -35,10 +35,17 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int dram_init(void)
 {
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+	/* dram_init must store complete ramsize in gd->ram_size */
+	gd->ram_size = get_ram_size(
+			(volatile void *)CONFIG_SYS_SDRAM_BASE,
+			CONFIG_MAX_RAM_BANK_SIZE);
+	return 0;
+}
 
-	return(0);
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_dram[0].size = gd->ram_size;
 }
 
 #ifdef CONFIG_DRIVER_TI_EMAC
@@ -68,45 +75,22 @@ err:
 	return 0;
 }
 
-/* If there is a MAC address in the environment, and if it is not identical to
- * the MAC address in the EEPROM, then a warning is printed and the MAC address
- * from the environment is used.
- *
+/*
  * If there is no MAC address in the environment, then it will be initialized
  * (silently) from the value in the EEPROM.
  */
-void dv_configure_mac_address(uint8_t *rom_enetaddr)
+void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr)
 {
-	int i;
-	u_int8_t env_enetaddr[6];
-	char *tmp = getenv("ethaddr");
-	char *end;
-
-	/* Read Ethernet MAC address from the U-Boot environment.
-	 * If it is not defined, env_enetaddr[] will be cleared. */
-	for (i = 0; i < 6; i++) {
-		env_enetaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0;
-		if (tmp)
-			tmp = (*end) ? end+1 : end;
-	}
-
-	/* Check if EEPROM and U-Boot environment MAC addresses match. */
-	if (memcmp(env_enetaddr, "\0\0\0\0\0\0", 6) != 0 &&
-	    memcmp(env_enetaddr, rom_enetaddr, 6) != 0) {
-		printf("Warning: MAC addresses don't match:\n");
-		printf("  EEPROM MAC address: %pM\n", rom_enetaddr);
-		printf("     \"ethaddr\" value: %pM\n", env_enetaddr) ;
-		debug("### Using MAC address from environment\n");
-	}
-	if (!tmp) {
-		char ethaddr[20];
+	uint8_t env_enetaddr[6];
 
+	eth_getenv_enetaddr_by_index(0, env_enetaddr);
+	if (!memcmp(env_enetaddr, "\0\0\0\0\0\0", 6)) {
 		/* There is no MAC address in the environment, so we initialize
 		 * it from the value in the EEPROM. */
-		sprintf(ethaddr, "%pM", rom_enetaddr) ;
-		debug("### Setting environment from EEPROM MAC address = \"%s\"\n",
-		      ethaddr);
-		setenv("ethaddr", ethaddr);
+		debug("### Setting environment from EEPROM MAC address = "
+			"\"%pM\"\n",
+			env_enetaddr);
+		eth_setenv_enetaddr("ethaddr", rom_enetaddr);
 	}
 }