X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=board%2Fdavinci%2Fdvevm%2Fdvevm.c;h=d5c851b5371da0bfb4c790e2c1116539e7835b4a;hb=47c5455a489c8e558ecb002a3a97a030ce490f9e;hp=3fe8858ee3c89776b33ddcb65d52f74ed64176a8;hpb=9eb468da3fd8753de55ab271d6ff5ed7f36d7ea2;p=u-boot

diff --git a/board/davinci/dvevm/dvevm.c b/board/davinci/dvevm/dvevm.c
index 3fe8858ee3..d5c851b537 100644
--- a/board/davinci/dvevm/dvevm.c
+++ b/board/davinci/dvevm/dvevm.c
@@ -27,9 +27,7 @@
 #include <common.h>
 #include <i2c.h>
 #include <asm/arch/hardware.h>
-#include <asm/arch/emac_defs.h>
-#include "../common/psc.h"
-#include "../common/misc.h"
+#include <asm/arch/davinci_misc.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -41,16 +39,13 @@ int board_init(void)
 	/* address of boot parameters */
 	gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
 
-	/* Workaround for TMS320DM6446 errata 1.3.22 */
-	REG(PSC_SILVER_BULLET) = 0;
+	/* Configure AEMIF pins (although this should be configured at boot time
+	 * with pull-up/pull-down resistors) */
+	REG(PINMUX0) = 0x00000c1f;
+
+	davinci_errata_workarounds();
 
 	/* Power on required peripherals */
-	lpsc_on(DAVINCI_LPSC_EMAC);
-	lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER);
-	lpsc_on(DAVINCI_LPSC_MDIO);
-	lpsc_on(DAVINCI_LPSC_I2C);
-	lpsc_on(DAVINCI_LPSC_UART0);
-	lpsc_on(DAVINCI_LPSC_TIMER1);
 	lpsc_on(DAVINCI_LPSC_GPIO);
 	lpsc_on(DAVINCI_LPSC_USB);
 
@@ -59,24 +54,11 @@ int board_init(void)
 	dsp_on();
 #endif /* CONFIG_SYS_USE_DSPLINK */
 
-	/* Bringup UART0 out of reset */
-	REG(UART0_PWREMU_MGMT) = 0x0000e003;
-
-	/* Enable GIO3.3V cells used for EMAC */
-	REG(VDD3P3V_PWDN) = 0;
-
-	/* Enable UART0 MUX lines */
-	REG(PINMUX1) |= 1;
-
-	/* Enable EMAC and AEMIF pins */
-	REG(PINMUX0) = 0x80000c1f;
-
-	/* Enable I2C pin Mux */
-	REG(PINMUX1) |= (1 << 7);
-
-	/* Set the Bus Priority Register to appropriate value */
-	REG(VBPR) = 0x20;
+	davinci_enable_uart0();
+	davinci_enable_emac();
+	davinci_enable_i2c();
 
+	lpsc_on(DAVINCI_LPSC_TIMER1);
 	timer_init();
 
 	return(0);
@@ -87,14 +69,9 @@ int misc_init_r(void)
 	uint8_t video_mode;
 	uint8_t eeprom_enetaddr[6];
 
-	dv_display_clk_infos();
-
 	/* Read Ethernet MAC address from EEPROM if available. */
 	if (dvevm_read_mac_address(eeprom_enetaddr))
-		dv_configure_mac_address(eeprom_enetaddr);
-
-	if (!eth_hw_init())
-		printf("ethernet init failed!\n");
+		davinci_sync_env_enetaddr(eeprom_enetaddr);
 
 	i2c_read(0x39, 0x00, 1, &video_mode, 1);