X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=board%2Fdenx%2Fm28evk%2Fm28evk.c;h=aff7c1fe5e6554b886e5ce09a31f3dc7da709ba0;hb=3c016704d9c5418479e68e4690759cb2be6f90d3;hp=9d6db65f1fa0d094e7a6691d3c9c4d75542cacd4;hpb=5fb29f3c48d26981b117b08286bc16ec99d4ca0b;p=u-boot

diff --git a/board/denx/m28evk/m28evk.c b/board/denx/m28evk/m28evk.c
index 9d6db65f1f..aff7c1fe5e 100644
--- a/board/denx/m28evk/m28evk.c
+++ b/board/denx/m28evk/m28evk.c
@@ -43,20 +43,24 @@ DECLARE_GLOBAL_DATA_PTR;
 int board_early_init_f(void)
 {
 	/* IO0 clock at 480MHz */
-	mx28_set_ioclk(MXC_IOCLK0, 480000);
+	mxs_set_ioclk(MXC_IOCLK0, 480000);
 	/* IO1 clock at 480MHz */
-	mx28_set_ioclk(MXC_IOCLK1, 480000);
+	mxs_set_ioclk(MXC_IOCLK1, 480000);
 
 	/* SSP0 clock at 96MHz */
-	mx28_set_sspclk(MXC_SSPCLK0, 96000, 0);
+	mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
 	/* SSP2 clock at 160MHz */
-	mx28_set_sspclk(MXC_SSPCLK2, 160000, 0);
+	mxs_set_sspclk(MXC_SSPCLK2, 160000, 0);
 
 #ifdef	CONFIG_CMD_USB
 	mxs_iomux_setup_pad(MX28_PAD_SSP2_SS1__USB1_OVERCURRENT);
 	mxs_iomux_setup_pad(MX28_PAD_AUART3_TX__GPIO_3_13 |
 			MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP);
 	gpio_direction_output(MX28_PAD_AUART3_TX__GPIO_3_13, 0);
+
+	mxs_iomux_setup_pad(MX28_PAD_AUART3_RX__GPIO_3_12 |
+			MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP);
+	gpio_direction_output(MX28_PAD_AUART3_RX__GPIO_3_12, 0);
 #endif
 
 	return 0;
@@ -93,7 +97,7 @@ int board_mmc_init(bd_t *bis)
 	/* Turn on the power to the card. */
 	gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 0);
 
-	return mxsmmc_initialize(bis, 0, m28_mmc_wp);
+	return mxsmmc_initialize(bis, 0, m28_mmc_wp, NULL);
 }
 #endif