X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=board%2Fesd%2Fcpci750%2Fsdram_init.c;h=a479f0f5f83672440a7a18f8c1e007e8baf80778;hb=9973e3c614721bbf169882ffc3be266a6611cd60;hp=d22ffe5179d9124945638f3fd368cdc0b4c99745;hpb=771e05be07589ca159d361142387e03fd26d2f6d;p=u-boot diff --git a/board/esd/cpci750/sdram_init.c b/board/esd/cpci750/sdram_init.c index d22ffe5179..a479f0f5f8 100644 --- a/board/esd/cpci750/sdram_init.c +++ b/board/esd/cpci750/sdram_init.c @@ -45,6 +45,7 @@ #include "64360.h" #include "mv_regs.h" +DECLARE_GLOBAL_DATA_PTR; #undef DEBUG /* #define DEBUG */ @@ -105,7 +106,7 @@ memory_map_bank(unsigned int bankNo, return 0; } -#define GB (1 << 30) +#define GB (1 << 30) /* much of this code is based on (or is) the code in the pip405 port */ /* thanks go to the authors of said port - Josh */ @@ -125,94 +126,93 @@ typedef struct sdram_info { typedef enum _memoryType {SDRAM, DDR} MEMORY_TYPE; typedef enum _voltageInterface {TTL_5V_TOLERANT, LVTTL, HSTL_1_5V, - SSTL_3_3V, SSTL_2_5V, VOLTAGE_UNKNOWN, - } VOLTAGE_INTERFACE; + SSTL_3_3V, SSTL_2_5V, VOLTAGE_UNKNOWN, + } VOLTAGE_INTERFACE; typedef enum _max_CL_supported_DDR {DDR_CL_1=1, DDR_CL_1_5=2, DDR_CL_2=4, DDR_CL_2_5=8, DDR_CL_3=16, DDR_CL_3_5=32, DDR_CL_FAULT} MAX_CL_SUPPORTED_DDR; typedef enum _max_CL_supported_SD {SD_CL_1=1, SD_CL_2, SD_CL_3, SD_CL_4, SD_CL_5, SD_CL_6, SD_CL_7, SD_FAULT} MAX_CL_SUPPORTED_SD; /* SDRAM/DDR information struct */ -typedef struct _gtMemoryDimmInfo -{ - MEMORY_TYPE memoryType; - unsigned int numOfRowAddresses; - unsigned int numOfColAddresses; - unsigned int numOfModuleBanks; - unsigned int dataWidth; - VOLTAGE_INTERFACE voltageInterface; - unsigned int errorCheckType; /* ECC , PARITY..*/ - unsigned int sdramWidth; /* 4,8,16 or 32 */; - unsigned int errorCheckDataWidth; /* 0 - no, 1 - Yes */ - unsigned int minClkDelay; - unsigned int burstLengthSupported; - unsigned int numOfBanksOnEachDevice; - unsigned int suportedCasLatencies; - unsigned int RefreshInterval; - unsigned int maxCASlatencySupported_LoP; /* LoP left of point (measured in ns) */ - unsigned int maxCASlatencySupported_RoP; /* RoP right of point (measured in ns)*/ - MAX_CL_SUPPORTED_DDR maxClSupported_DDR; - MAX_CL_SUPPORTED_SD maxClSupported_SD; - unsigned int moduleBankDensity; - /* module attributes (true for yes) */ - bool bufferedAddrAndControlInputs; - bool registeredAddrAndControlInputs; - bool onCardPLL; - bool bufferedDQMBinputs; - bool registeredDQMBinputs; - bool differentialClockInput; - bool redundantRowAddressing; - - /* module general attributes */ - bool suportedAutoPreCharge; - bool suportedPreChargeAll; - bool suportedEarlyRasPreCharge; - bool suportedWrite1ReadBurst; - bool suported5PercentLowVCC; - bool suported5PercentUpperVCC; - /* module timing parameters */ - unsigned int minRasToCasDelay; - unsigned int minRowActiveRowActiveDelay; - unsigned int minRasPulseWidth; - unsigned int minRowPrechargeTime; /* measured in ns */ - - int addrAndCommandHoldTime; /* LoP left of point (measured in ns) */ - int addrAndCommandSetupTime; /* (measured in ns/100) */ - int dataInputSetupTime; /* LoP left of point (measured in ns) */ - int dataInputHoldTime; /* LoP left of point (measured in ns) */ +typedef struct _gtMemoryDimmInfo { + MEMORY_TYPE memoryType; + unsigned int numOfRowAddresses; + unsigned int numOfColAddresses; + unsigned int numOfModuleBanks; + unsigned int dataWidth; + VOLTAGE_INTERFACE voltageInterface; + unsigned int errorCheckType; /* ECC , PARITY.. */ + unsigned int sdramWidth; /* 4,8,16 or 32 */ ; + unsigned int errorCheckDataWidth; /* 0 - no, 1 - Yes */ + unsigned int minClkDelay; + unsigned int burstLengthSupported; + unsigned int numOfBanksOnEachDevice; + unsigned int suportedCasLatencies; + unsigned int RefreshInterval; + unsigned int maxCASlatencySupported_LoP; /* LoP left of point (measured in ns) */ + unsigned int maxCASlatencySupported_RoP; /* RoP right of point (measured in ns) */ + MAX_CL_SUPPORTED_DDR maxClSupported_DDR; + MAX_CL_SUPPORTED_SD maxClSupported_SD; + unsigned int moduleBankDensity; + /* module attributes (true for yes) */ + bool bufferedAddrAndControlInputs; + bool registeredAddrAndControlInputs; + bool onCardPLL; + bool bufferedDQMBinputs; + bool registeredDQMBinputs; + bool differentialClockInput; + bool redundantRowAddressing; + + /* module general attributes */ + bool suportedAutoPreCharge; + bool suportedPreChargeAll; + bool suportedEarlyRasPreCharge; + bool suportedWrite1ReadBurst; + bool suported5PercentLowVCC; + bool suported5PercentUpperVCC; + /* module timing parameters */ + unsigned int minRasToCasDelay; + unsigned int minRowActiveRowActiveDelay; + unsigned int minRasPulseWidth; + unsigned int minRowPrechargeTime; /* measured in ns */ + + int addrAndCommandHoldTime; /* LoP left of point (measured in ns) */ + int addrAndCommandSetupTime; /* (measured in ns/100) */ + int dataInputSetupTime; /* LoP left of point (measured in ns) */ + int dataInputHoldTime; /* LoP left of point (measured in ns) */ /* tAC times for highest 2nd and 3rd highest CAS Latency values */ - unsigned int clockToDataOut_LoP; /* LoP left of point (measured in ns) */ - unsigned int clockToDataOut_RoP; /* RoP right of point (measured in ns)*/ - unsigned int clockToDataOutMinus1_LoP; /* LoP left of point (measured in ns) */ - unsigned int clockToDataOutMinus1_RoP; /* RoP right of point (measured in ns)*/ - unsigned int clockToDataOutMinus2_LoP; /* LoP left of point (measured in ns) */ - unsigned int clockToDataOutMinus2_RoP; /* RoP right of point (measured in ns)*/ - - unsigned int minimumCycleTimeAtMaxCasLatancy_LoP; /* LoP left of point (measured in ns) */ - unsigned int minimumCycleTimeAtMaxCasLatancy_RoP; /* RoP right of point (measured in ns)*/ - - unsigned int minimumCycleTimeAtMaxCasLatancyMinus1_LoP; /* LoP left of point (measured in ns) */ - unsigned int minimumCycleTimeAtMaxCasLatancyMinus1_RoP; /* RoP right of point (measured in ns)*/ - - unsigned int minimumCycleTimeAtMaxCasLatancyMinus2_LoP; /* LoP left of point (measured in ns) */ - unsigned int minimumCycleTimeAtMaxCasLatancyMinus2_RoP; /* RoP right of point (measured in ns)*/ - - /* Parameters calculated from - the extracted DIMM information */ - unsigned int size; - unsigned int deviceDensity; /* 16,64,128,256 or 512 Mbit */ - unsigned int numberOfDevices; - uchar drb_size; /* DRAM size in n*64Mbit */ - uchar slot; /* Slot Number this module is inserted in */ - uchar spd_raw_data[128]; /* Content of SPD-EEPROM copied 1:1 */ + unsigned int clockToDataOut_LoP; /* LoP left of point (measured in ns) */ + unsigned int clockToDataOut_RoP; /* RoP right of point (measured in ns) */ + unsigned int clockToDataOutMinus1_LoP; /* LoP left of point (measured in ns) */ + unsigned int clockToDataOutMinus1_RoP; /* RoP right of point (measured in ns) */ + unsigned int clockToDataOutMinus2_LoP; /* LoP left of point (measured in ns) */ + unsigned int clockToDataOutMinus2_RoP; /* RoP right of point (measured in ns) */ + + unsigned int minimumCycleTimeAtMaxCasLatancy_LoP; /* LoP left of point (measured in ns) */ + unsigned int minimumCycleTimeAtMaxCasLatancy_RoP; /* RoP right of point (measured in ns) */ + + unsigned int minimumCycleTimeAtMaxCasLatancyMinus1_LoP; /* LoP left of point (measured in ns) */ + unsigned int minimumCycleTimeAtMaxCasLatancyMinus1_RoP; /* RoP right of point (measured in ns) */ + + unsigned int minimumCycleTimeAtMaxCasLatancyMinus2_LoP; /* LoP left of point (measured in ns) */ + unsigned int minimumCycleTimeAtMaxCasLatancyMinus2_RoP; /* RoP right of point (measured in ns) */ + + /* Parameters calculated from + the extracted DIMM information */ + unsigned int size; + unsigned int deviceDensity; /* 16,64,128,256 or 512 Mbit */ + unsigned int numberOfDevices; + uchar drb_size; /* DRAM size in n*64Mbit */ + uchar slot; /* Slot Number this module is inserted in */ + uchar spd_raw_data[128]; /* Content of SPD-EEPROM copied 1:1 */ #ifdef DEBUG - uchar manufactura[8]; /* Content of SPD-EEPROM Byte 64-71 */ - uchar modul_id[18]; /* Content of SPD-EEPROM Byte 73-90 */ - uchar vendor_data[27]; /* Content of SPD-EEPROM Byte 99-125 */ - unsigned long modul_serial_no; /* Content of SPD-EEPROM Byte 95-98 */ - unsigned int manufac_date; /* Content of SPD-EEPROM Byte 93-94 */ - unsigned int modul_revision; /* Content of SPD-EEPROM Byte 91-92 */ - uchar manufac_place; /* Content of SPD-EEPROM Byte 72 */ + uchar manufactura[8]; /* Content of SPD-EEPROM Byte 64-71 */ + uchar modul_id[18]; /* Content of SPD-EEPROM Byte 73-90 */ + uchar vendor_data[27]; /* Content of SPD-EEPROM Byte 99-125 */ + unsigned long modul_serial_no; /* Content of SPD-EEPROM Byte 95-98 */ + unsigned int manufac_date; /* Content of SPD-EEPROM Byte 93-94 */ + unsigned int modul_revision; /* Content of SPD-EEPROM Byte 91-92 */ + uchar manufac_place; /* Content of SPD-EEPROM Byte 72 */ #endif } AUX_MEM_DIMM_INFO; @@ -248,760 +248,972 @@ NSto10PS(unsigned char spd_byte) /* This code reads the SPD chip on the sdram and populates * the array which is passed in with the relevant information */ /* static int check_dimm(uchar slot, AUX_MEM_DIMM_INFO *info) */ -static int -check_dimm(uchar slot, AUX_MEM_DIMM_INFO *dimmInfo) - +static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) { - DECLARE_GLOBAL_DATA_PTR; - - unsigned long spd_checksum; + unsigned long spd_checksum; uchar addr = slot == 0 ? DIMM0_I2C_ADDR : DIMM1_I2C_ADDR; int ret; - unsigned int i,j,density = 1,devicesForErrCheck = 0; + unsigned int i, j, density = 1, devicesForErrCheck = 0; + #ifdef DEBUG - unsigned int k; + unsigned int k; #endif - unsigned int rightOfPoint = 0,leftOfPoint = 0, mult, div, time_tmp; - int sign = 1,shift,maskLeftOfPoint,maskRightOfPoint; + unsigned int rightOfPoint = 0, leftOfPoint = 0, mult, div, time_tmp; + int sign = 1, shift, maskLeftOfPoint, maskRightOfPoint; uchar supp_cal, cal_val; ulong memclk, tmemclk; ulong tmp; - uchar trp_clocks=0, trcd_clocks, tras_clocks, trrd_clocks; + uchar trp_clocks = 0, trcd_clocks, tras_clocks, trrd_clocks; uchar data[128]; memclk = gd->bus_clk; - tmemclk = 1000000000 / (memclk / 100); /* in 10 ps units */ + tmemclk = 1000000000 / (memclk / 100); /* in 10 ps units */ - memset(data, 0, sizeof(data)); + memset (data, 0, sizeof (data)); ret = 0; - DP(puts("before i2c read\n")); + DP (puts ("before i2c read\n")); - ret = i2c_read(addr, 0, 2, data, 128); + ret = i2c_read (addr, 0, 2, data, 128); - DP(puts("after i2c read\n")); + DP (puts ("after i2c read\n")); - if ((data[64] != 'e') || (data[65] != 's') || (data[66] != 'd') || (data[67] != '-') || - (data[68] != 'g') || (data[69] != 'm') || (data[70] != 'b') || (data[71] != 'h')) - { - ret = -1; - } + if ((data[64] != 'e') || (data[65] != 's') || (data[66] != 'd') + || (data[67] != '-') || (data[68] != 'g') || (data[69] != 'm') + || (data[70] != 'b') || (data[71] != 'h')) { + ret = -1; + } - if ((ret != 0) && (slot == 0)) - { - memset(data, 0, sizeof(data)); - data[ 0] = 0x80; data[ 1] = 0x08; data[ 2] = 0x07; data[ 3] = 0x0c; - data[ 4] = 0x09; data[ 5] = 0x01; data[ 6] = 0x48; data[ 7] = 0x00; - data[ 8] = 0x04; data[ 9] = 0x75; data[10] = 0x80; data[11] = 0x02; - data[12] = 0x80; data[13] = 0x10; data[14] = 0x08; data[15] = 0x01; - data[16] = 0x0e; data[17] = 0x04; data[18] = 0x0c; data[19] = 0x01; - data[20] = 0x02; data[21] = 0x20; data[22] = 0x00; data[23] = 0xa0; - data[24] = 0x80; data[25] = 0x00; data[26] = 0x00; data[27] = 0x50; - data[28] = 0x3c; data[29] = 0x50; data[30] = 0x32; data[31] = 0x10; - data[32] = 0xb0; data[33] = 0xb0; data[34] = 0x60; data[35] = 0x60; - data[64] = 'e' ; data[65] = 's' ; data[66] = 'd' ; data[67] = '-' ; - data[68] = 'g' ; data[69] = 'm' ; data[70] = 'b' ; data[71] = 'h' ; - ret = 0; - } + if ((ret != 0) && (slot == 0)) { + memset (data, 0, sizeof (data)); + data[0] = 0x80; + data[1] = 0x08; + data[2] = 0x07; + data[3] = 0x0c; + data[4] = 0x09; + data[5] = 0x01; + data[6] = 0x48; + data[7] = 0x00; + data[8] = 0x04; + data[9] = 0x75; + data[10] = 0x80; + data[11] = 0x02; + data[12] = 0x80; + data[13] = 0x10; + data[14] = 0x08; + data[15] = 0x01; + data[16] = 0x0e; + data[17] = 0x04; + data[18] = 0x0c; + data[19] = 0x01; + data[20] = 0x02; + data[21] = 0x20; + data[22] = 0x00; + data[23] = 0xa0; + data[24] = 0x80; + data[25] = 0x00; + data[26] = 0x00; + data[27] = 0x50; + data[28] = 0x3c; + data[29] = 0x50; + data[30] = 0x32; + data[31] = 0x10; + data[32] = 0xb0; + data[33] = 0xb0; + data[34] = 0x60; + data[35] = 0x60; + data[64] = 'e'; + data[65] = 's'; + data[66] = 'd'; + data[67] = '-'; + data[68] = 'g'; + data[69] = 'm'; + data[70] = 'b'; + data[71] = 'h'; + ret = 0; + } /* zero all the values */ - memset(dimmInfo, 0, sizeof(*dimmInfo)); + memset (dimmInfo, 0, sizeof (*dimmInfo)); - /* copy the SPD content 1:1 into the dimmInfo structure*/ - for(i = 0 ; i <= 127 ; i++) - { - dimmInfo->spd_raw_data[i] = data[i]; - } + /* copy the SPD content 1:1 into the dimmInfo structure */ + for (i = 0; i <= 127; i++) { + dimmInfo->spd_raw_data[i] = data[i]; + } if (ret) { - DP(printf("No DIMM in slot %d [err = %x]\n", slot, ret)); + DP (printf ("No DIMM in slot %d [err = %x]\n", slot, ret)); return 0; - } - else - dimmInfo->slot = slot; /* start to fill up dimminfo for this "slot" */ + } else + dimmInfo->slot = slot; /* start to fill up dimminfo for this "slot" */ #ifdef CFG_DISPLAY_DIMM_SPD_CONTENT - for(i = 0 ; i <= 127 ; i++) - { - printf("SPD-EEPROM Byte %3d = %3x (%3d)\n", i, data[i], data[i]); - } + for (i = 0; i <= 127; i++) { + printf ("SPD-EEPROM Byte %3d = %3x (%3d)\n", i, data[i], + data[i]); + } #endif #ifdef DEBUG -/* find Manufactura of Dimm Module */ - for(i = 0 ; i < sizeof(dimmInfo->manufactura) ; i++) - { - dimmInfo->manufactura[i] = data[64+i]; - } - printf("\nThis RAM-Module is produced by: %s\n", dimmInfo->manufactura); + /* find Manufacturer of Dimm Module */ + for (i = 0; i < sizeof (dimmInfo->manufactura); i++) { + dimmInfo->manufactura[i] = data[64 + i]; + } + printf ("\nThis RAM-Module is produced by: %s\n", + dimmInfo->manufactura); -/* find Manul-ID of Dimm Module */ - for(i = 0 ; i < sizeof(dimmInfo->modul_id) ; i++) - { - dimmInfo->modul_id[i] = data[73+i]; - } - printf("The Module-ID of this RAM-Module is: %s\n", dimmInfo->modul_id); + /* find Manul-ID of Dimm Module */ + for (i = 0; i < sizeof (dimmInfo->modul_id); i++) { + dimmInfo->modul_id[i] = data[73 + i]; + } + printf ("The Module-ID of this RAM-Module is: %s\n", + dimmInfo->modul_id); -/* find Vendor-Data of Dimm Module */ - for(i = 0 ; i < sizeof(dimmInfo->vendor_data) ; i++) - { - dimmInfo->vendor_data[i] = data[99+i]; - } - printf("Vendor Data of this RAM-Module is: %s\n", dimmInfo->vendor_data); + /* find Vendor-Data of Dimm Module */ + for (i = 0; i < sizeof (dimmInfo->vendor_data); i++) { + dimmInfo->vendor_data[i] = data[99 + i]; + } + printf ("Vendor Data of this RAM-Module is: %s\n", + dimmInfo->vendor_data); -/* find modul_serial_no of Dimm Module */ - dimmInfo->modul_serial_no = (*((unsigned long *)(&data[95]))); - printf("Serial No. of this RAM-Module is: %ld (%lx)\n", dimmInfo->modul_serial_no, dimmInfo->modul_serial_no); + /* find modul_serial_no of Dimm Module */ + dimmInfo->modul_serial_no = (*((unsigned long *) (&data[95]))); + printf ("Serial No. of this RAM-Module is: %ld (%lx)\n", + dimmInfo->modul_serial_no, dimmInfo->modul_serial_no); -/* find Manufac-Data of Dimm Module */ - dimmInfo->manufac_date = (*((unsigned int *)(&data[93]))); - printf("Manufactoring Date of this RAM-Module is: %d.%d\n", data[93], data [94]); /*dimmInfo->manufac_date*/ + /* find Manufac-Data of Dimm Module */ + dimmInfo->manufac_date = (*((unsigned int *) (&data[93]))); + printf ("Manufactoring Date of this RAM-Module is: %d.%d\n", data[93], data[94]); /*dimmInfo->manufac_date */ -/* find modul_revision of Dimm Module */ - dimmInfo->modul_revision = (*((unsigned int *)(&data[91]))); - printf("Module Revision of this RAM-Module is: %d.%d\n", data[91], data [92]); /* dimmInfo->modul_revision*/ + /* find modul_revision of Dimm Module */ + dimmInfo->modul_revision = (*((unsigned int *) (&data[91]))); + printf ("Module Revision of this RAM-Module is: %d.%d\n", data[91], data[92]); /* dimmInfo->modul_revision */ -/* find manufac_place of Dimm Module */ - dimmInfo->manufac_place = (*((unsigned char *)(&data[72]))); - printf("manufac_place of this RAM-Module is: %d\n", dimmInfo->manufac_place); + /* find manufac_place of Dimm Module */ + dimmInfo->manufac_place = (*((unsigned char *) (&data[72]))); + printf ("manufac_place of this RAM-Module is: %d\n", + dimmInfo->manufac_place); #endif /*------------------------------------------------------------------------------------------------------------------------------*/ /* calculate SPD checksum */ /*------------------------------------------------------------------------------------------------------------------------------*/ - spd_checksum = 0; -#if 0 /* test-only */ - for(i = 0 ; i <= 62 ; i++) - { - spd_checksum += data[i]; - } + spd_checksum = 0; +#if 0 /* test-only */ + for (i = 0; i <= 62; i++) { + spd_checksum += data[i]; + } - if ((spd_checksum & 0xff) != data[63]) - { - printf("### Error in SPD Checksum !!! Is_value: %2x should value %2x\n", (unsigned int)(spd_checksum & 0xff), data[63]); - hang(); - } + if ((spd_checksum & 0xff) != data[63]) { + printf ("### Error in SPD Checksum !!! Is_value: %2x should value %2x\n", (unsigned int) (spd_checksum & 0xff), data[63]); + hang (); + } - else - printf("SPD Checksum ok!\n"); + else + printf ("SPD Checksum ok!\n"); #endif /* test-only */ /*------------------------------------------------------------------------------------------------------------------------------*/ - for(i = 2 ; i <= 35 ; i++) - { - switch(i) - { - case 2: /* Memory type (DDR / SDRAM) */ - dimmInfo->memoryType = (data[i] == 0x7)? DDR:SDRAM; - #ifdef DEBUG - if (dimmInfo->memoryType == 0) - DP(printf("Dram_type in slot %d is: SDRAM\n", dimmInfo->slot)); - if (dimmInfo->memoryType == 1) - DP(printf("Dram_type in slot %d is: DDRAM\n", dimmInfo->slot)); - #endif - break; + for (i = 2; i <= 35; i++) { + switch (i) { + case 2: /* Memory type (DDR / SDRAM) */ + dimmInfo->memoryType = (data[i] == 0x7) ? DDR : SDRAM; +#ifdef DEBUG + if (dimmInfo->memoryType == 0) + DP (printf + ("Dram_type in slot %d is: SDRAM\n", + dimmInfo->slot)); + if (dimmInfo->memoryType == 1) + DP (printf + ("Dram_type in slot %d is: DDRAM\n", + dimmInfo->slot)); +#endif + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 3: /* Number Of Row Addresses */ - dimmInfo->numOfRowAddresses = data[i]; - DP(printf("Module Number of row addresses: %d\n", dimmInfo->numOfRowAddresses)); - break; + case 3: /* Number Of Row Addresses */ + dimmInfo->numOfRowAddresses = data[i]; + DP (printf + ("Module Number of row addresses: %d\n", + dimmInfo->numOfRowAddresses)); + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 4: /* Number Of Column Addresses */ - dimmInfo->numOfColAddresses = data[i]; - DP(printf("Module Number of col addresses: %d\n", dimmInfo->numOfColAddresses)); - break; + case 4: /* Number Of Column Addresses */ + dimmInfo->numOfColAddresses = data[i]; + DP (printf + ("Module Number of col addresses: %d\n", + dimmInfo->numOfColAddresses)); + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 5: /* Number Of Module Banks */ - dimmInfo->numOfModuleBanks = data[i]; - DP(printf("Number of Banks on Mod. : %d\n", dimmInfo->numOfModuleBanks)); - break; + case 5: /* Number Of Module Banks */ + dimmInfo->numOfModuleBanks = data[i]; + DP (printf + ("Number of Banks on Mod. : %d\n", + dimmInfo->numOfModuleBanks)); + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 6: /* Data Width */ - dimmInfo->dataWidth = data[i]; - DP(printf("Module Data Width: %d\n", dimmInfo->dataWidth)); - break; + case 6: /* Data Width */ + dimmInfo->dataWidth = data[i]; + DP (printf + ("Module Data Width: %d\n", + dimmInfo->dataWidth)); + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 8: /* Voltage Interface */ - switch(data[i]) - { - case 0x0: - dimmInfo->voltageInterface = TTL_5V_TOLERANT; - DP(printf("Module is TTL_5V_TOLERANT\n")); - break; - case 0x1: - dimmInfo->voltageInterface = LVTTL; - DP(printf("Module is LVTTL\n")); - break; - case 0x2: - dimmInfo->voltageInterface = HSTL_1_5V; - DP(printf("Module is TTL_5V_TOLERANT\n")); - break; - case 0x3: - dimmInfo->voltageInterface = SSTL_3_3V; - DP(printf("Module is HSTL_1_5V\n")); - break; - case 0x4: - dimmInfo->voltageInterface = SSTL_2_5V; - DP(printf("Module is SSTL_2_5V\n")); - break; - default: - dimmInfo->voltageInterface = VOLTAGE_UNKNOWN; - DP(printf("Module is VOLTAGE_UNKNOWN\n")); - break; - } - break; + case 8: /* Voltage Interface */ + switch (data[i]) { + case 0x0: + dimmInfo->voltageInterface = TTL_5V_TOLERANT; + DP (printf + ("Module is TTL_5V_TOLERANT\n")); + break; + case 0x1: + dimmInfo->voltageInterface = LVTTL; + DP (printf + ("Module is LVTTL\n")); + break; + case 0x2: + dimmInfo->voltageInterface = HSTL_1_5V; + DP (printf + ("Module is TTL_5V_TOLERANT\n")); + break; + case 0x3: + dimmInfo->voltageInterface = SSTL_3_3V; + DP (printf + ("Module is HSTL_1_5V\n")); + break; + case 0x4: + dimmInfo->voltageInterface = SSTL_2_5V; + DP (printf + ("Module is SSTL_2_5V\n")); + break; + default: + dimmInfo->voltageInterface = VOLTAGE_UNKNOWN; + DP (printf + ("Module is VOLTAGE_UNKNOWN\n")); + break; + } + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 9: /* Minimum Cycle Time At Max CasLatancy */ - shift = (dimmInfo->memoryType == DDR)? 4:2; - mult = (dimmInfo->memoryType == DDR)? 10:25; - maskLeftOfPoint = (dimmInfo->memoryType == DDR)? 0xf0:0xfc; - maskRightOfPoint = (dimmInfo->memoryType == DDR)? 0xf:0x03; - leftOfPoint = (data[i] & maskLeftOfPoint) >> shift; - rightOfPoint = (data[i] & maskRightOfPoint)* mult; - dimmInfo->minimumCycleTimeAtMaxCasLatancy_LoP = leftOfPoint; - dimmInfo->minimumCycleTimeAtMaxCasLatancy_RoP = rightOfPoint; - DP(printf("Minimum Cycle Time At Max CasLatancy: %d.%d [ns]\n",leftOfPoint, rightOfPoint)); - break; + case 9: /* Minimum Cycle Time At Max CasLatancy */ + shift = (dimmInfo->memoryType == DDR) ? 4 : 2; + mult = (dimmInfo->memoryType == DDR) ? 10 : 25; + maskLeftOfPoint = + (dimmInfo->memoryType == DDR) ? 0xf0 : 0xfc; + maskRightOfPoint = + (dimmInfo->memoryType == DDR) ? 0xf : 0x03; + leftOfPoint = (data[i] & maskLeftOfPoint) >> shift; + rightOfPoint = (data[i] & maskRightOfPoint) * mult; + dimmInfo->minimumCycleTimeAtMaxCasLatancy_LoP = + leftOfPoint; + dimmInfo->minimumCycleTimeAtMaxCasLatancy_RoP = + rightOfPoint; + DP (printf + ("Minimum Cycle Time At Max CasLatancy: %d.%d [ns]\n", + leftOfPoint, rightOfPoint)); + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 10: /* Clock To Data Out */ - div = (dimmInfo->memoryType == DDR)? 100:10; - time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f)); - leftOfPoint = time_tmp / div; - rightOfPoint = time_tmp % div; - dimmInfo->clockToDataOut_LoP = leftOfPoint; - dimmInfo->clockToDataOut_RoP = rightOfPoint; - DP(printf("Clock To Data Out: %d.%2d [ns]\n",leftOfPoint, rightOfPoint )); - /*dimmInfo->clockToDataOut*/ - break; + case 10: /* Clock To Data Out */ + div = (dimmInfo->memoryType == DDR) ? 100 : 10; + time_tmp = + (((data[i] & 0xf0) >> 4) * 10) + + ((data[i] & 0x0f)); + leftOfPoint = time_tmp / div; + rightOfPoint = time_tmp % div; + dimmInfo->clockToDataOut_LoP = leftOfPoint; + dimmInfo->clockToDataOut_RoP = rightOfPoint; + DP (printf + ("Clock To Data Out: %d.%2d [ns]\n", + leftOfPoint, rightOfPoint)); + /*dimmInfo->clockToDataOut */ + break; /*------------------------------------------------------------------------------------------------------------------------------*/ #ifdef CONFIG_ECC - case 11: /* Error Check Type */ - dimmInfo->errorCheckType = data[i]; - DP(printf("Error Check Type (0=NONE): %d\n", dimmInfo->errorCheckType)); - break; + case 11: /* Error Check Type */ + dimmInfo->errorCheckType = data[i]; + DP (printf + ("Error Check Type (0=NONE): %d\n", + dimmInfo->errorCheckType)); + break; #endif /*------------------------------------------------------------------------------------------------------------------------------*/ - case 12: /* Refresh Interval */ - dimmInfo->RefreshInterval = data[i]; - DP(printf("RefreshInterval (80= Self refresh Normal, 15.625us) : %x\n", dimmInfo->RefreshInterval)); - break; + case 12: /* Refresh Interval */ + dimmInfo->RefreshInterval = data[i]; + DP (printf + ("RefreshInterval (80= Self refresh Normal, 15.625us) : %x\n", + dimmInfo->RefreshInterval)); + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 13: /* Sdram Width */ - dimmInfo->sdramWidth = data[i]; - DP(printf("Sdram Width: %d\n", dimmInfo->sdramWidth)); - break; + case 13: /* Sdram Width */ + dimmInfo->sdramWidth = data[i]; + DP (printf + ("Sdram Width: %d\n", + dimmInfo->sdramWidth)); + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 14: /* Error Check Data Width */ - dimmInfo->errorCheckDataWidth = data[i]; - DP(printf("Error Check Data Width: %d\n", dimmInfo->errorCheckDataWidth)); - break; + case 14: /* Error Check Data Width */ + dimmInfo->errorCheckDataWidth = data[i]; + DP (printf + ("Error Check Data Width: %d\n", + dimmInfo->errorCheckDataWidth)); + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 15: /* Minimum Clock Delay */ - dimmInfo->minClkDelay = data[i]; - DP(printf("Minimum Clock Delay: %d\n", dimmInfo->minClkDelay)); - break; + case 15: /* Minimum Clock Delay */ + dimmInfo->minClkDelay = data[i]; + DP (printf + ("Minimum Clock Delay: %d\n", + dimmInfo->minClkDelay)); + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 16: /* Burst Length Supported */ - /******-******-******-******* - * bit3 | bit2 | bit1 | bit0 * - *******-******-******-******* - burst length = * 8 | 4 | 2 | 1 * - ***************************** + case 16: /* Burst Length Supported */ + /******-******-******-******* + * bit3 | bit2 | bit1 | bit0 * + *******-******-******-******* + burst length = * 8 | 4 | 2 | 1 * + ***************************** - If for example bit0 and bit2 are set, the burst - length supported are 1 and 4. */ + If for example bit0 and bit2 are set, the burst + length supported are 1 and 4. */ - dimmInfo->burstLengthSupported = data[i]; + dimmInfo->burstLengthSupported = data[i]; #ifdef DEBUG - DP(printf("Burst Length Supported: ")); - if (dimmInfo->burstLengthSupported & 0x01) - DP(printf("1, ")); - if (dimmInfo->burstLengthSupported & 0x02) - DP(printf("2, ")); - if (dimmInfo->burstLengthSupported & 0x04) - DP(printf("4, ")); - if (dimmInfo->burstLengthSupported & 0x08) - DP(printf("8, ")); - DP(printf(" Bit \n")); + DP (printf + ("Burst Length Supported: ")); + if (dimmInfo->burstLengthSupported & 0x01) + DP (printf ("1, ")); + if (dimmInfo->burstLengthSupported & 0x02) + DP (printf ("2, ")); + if (dimmInfo->burstLengthSupported & 0x04) + DP (printf ("4, ")); + if (dimmInfo->burstLengthSupported & 0x08) + DP (printf ("8, ")); + DP (printf (" Bit \n")); #endif - break; + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 17: /* Number Of Banks On Each Device */ - dimmInfo->numOfBanksOnEachDevice = data[i]; - DP(printf("Number Of Banks On Each Chip: %d\n", dimmInfo->numOfBanksOnEachDevice)); - break; + case 17: /* Number Of Banks On Each Device */ + dimmInfo->numOfBanksOnEachDevice = data[i]; + DP (printf + ("Number Of Banks On Each Chip: %d\n", + dimmInfo->numOfBanksOnEachDevice)); + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 18: /* Suported Cas Latencies */ - - /* DDR: - *******-******-******-******-******-******-******-******* - * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * - *******-******-******-******-******-******-******-******* - CAS = * TBD | TBD | 3.5 | 3 | 2.5 | 2 | 1.5 | 1 * - ********************************************************* - SDRAM: - *******-******-******-******-******-******-******-******* - * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * - *******-******-******-******-******-******-******-******* - CAS = * TBD | 7 | 6 | 5 | 4 | 3 | 2 | 1 * - ********************************************************/ - dimmInfo->suportedCasLatencies = data[i]; + case 18: /* Suported Cas Latencies */ + + /* DDR: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + CAS = * TBD | TBD | 3.5 | 3 | 2.5 | 2 | 1.5 | 1 * + ********************************************************* + SDRAM: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + CAS = * TBD | 7 | 6 | 5 | 4 | 3 | 2 | 1 * + ********************************************************/ + dimmInfo->suportedCasLatencies = data[i]; #ifdef DEBUG - DP(printf("Suported Cas Latencies: (CL) ")); - if (dimmInfo->memoryType == 0) /* SDRAM*/ - { - for (k = 0; k <=7; k++) - { - if (dimmInfo->suportedCasLatencies & (1 << k)) - DP(printf("%d, ", k+1)); - } + DP (printf + ("Suported Cas Latencies: (CL) ")); + if (dimmInfo->memoryType == 0) { /* SDRAM */ + for (k = 0; k <= 7; k++) { + if (dimmInfo-> + suportedCasLatencies & (1 << k)) + DP (printf + ("%d, ", + k + 1)); + } + + } else { /* DDR-RAM */ + + if (dimmInfo->suportedCasLatencies & 1) + DP (printf ("1, ")); + if (dimmInfo->suportedCasLatencies & 2) + DP (printf ("1.5, ")); + if (dimmInfo->suportedCasLatencies & 4) + DP (printf ("2, ")); + if (dimmInfo->suportedCasLatencies & 8) + DP (printf ("2.5, ")); + if (dimmInfo->suportedCasLatencies & 16) + DP (printf ("3, ")); + if (dimmInfo->suportedCasLatencies & 32) + DP (printf ("3.5, ")); - } - else /* DDR-RAM*/ - { - if (dimmInfo->suportedCasLatencies & 1) - DP(printf("1, ")); - if (dimmInfo->suportedCasLatencies & 2) - DP(printf("1.5, ")); - if (dimmInfo->suportedCasLatencies & 4) - DP(printf("2, ")); - if (dimmInfo->suportedCasLatencies & 8) - DP(printf("2.5, ")); - if (dimmInfo->suportedCasLatencies & 16) - DP(printf("3, ")); - if (dimmInfo->suportedCasLatencies & 32) - DP(printf("3.5, ")); - - } - DP(printf("\n")); + } + DP (printf ("\n")); #endif - /* Calculating MAX CAS latency */ - for(j = 7 ; j > 0 ; j--) - { - if(((dimmInfo->suportedCasLatencies >> j) & 0x1) == 1) - { - switch(dimmInfo->memoryType) - { - case DDR: - /* CAS latency 1, 1.5, 2, 2.5, 3, 3.5 */ - switch (j) - { - case 7: - DP(printf("Max. Cas Latencies (DDR): ERROR !!!\n")); - dimmInfo->maxClSupported_DDR = DDR_CL_FAULT; - hang(); - break; - case 6: - DP(printf("Max. Cas Latencies (DDR): ERROR !!!\n")); - dimmInfo->maxClSupported_DDR = DDR_CL_FAULT; - hang(); - break; - case 5: - DP(printf("Max. Cas Latencies (DDR): 3.5 clk's\n")); - dimmInfo->maxClSupported_DDR = DDR_CL_3_5; - break; - case 4: - DP(printf("Max. Cas Latencies (DDR): 3 clk's \n")); - dimmInfo->maxClSupported_DDR = DDR_CL_3; - break; - case 3: - DP(printf("Max. Cas Latencies (DDR): 2.5 clk's \n")); - dimmInfo->maxClSupported_DDR = DDR_CL_2_5; - break; - case 2: - DP(printf("Max. Cas Latencies (DDR): 2 clk's \n")); - dimmInfo->maxClSupported_DDR = DDR_CL_2; - break; - case 1: - DP(printf("Max. Cas Latencies (DDR): 1.5 clk's \n")); - dimmInfo->maxClSupported_DDR = DDR_CL_1_5; - break; + /* Calculating MAX CAS latency */ + for (j = 7; j > 0; j--) { + if (((dimmInfo-> + suportedCasLatencies >> j) & 0x1) == + 1) { + switch (dimmInfo->memoryType) { + case DDR: + /* CAS latency 1, 1.5, 2, 2.5, 3, 3.5 */ + switch (j) { + case 7: + DP (printf + ("Max. Cas Latencies (DDR): ERROR !!!\n")); + dimmInfo-> + maxClSupported_DDR + = + DDR_CL_FAULT; + hang (); + break; + case 6: + DP (printf + ("Max. Cas Latencies (DDR): ERROR !!!\n")); + dimmInfo-> + maxClSupported_DDR + = + DDR_CL_FAULT; + hang (); + break; + case 5: + DP (printf + ("Max. Cas Latencies (DDR): 3.5 clk's\n")); + dimmInfo-> + maxClSupported_DDR + = DDR_CL_3_5; + break; + case 4: + DP (printf + ("Max. Cas Latencies (DDR): 3 clk's \n")); + dimmInfo-> + maxClSupported_DDR + = DDR_CL_3; + break; + case 3: + DP (printf + ("Max. Cas Latencies (DDR): 2.5 clk's \n")); + dimmInfo-> + maxClSupported_DDR + = DDR_CL_2_5; + break; + case 2: + DP (printf + ("Max. Cas Latencies (DDR): 2 clk's \n")); + dimmInfo-> + maxClSupported_DDR + = DDR_CL_2; + break; + case 1: + DP (printf + ("Max. Cas Latencies (DDR): 1.5 clk's \n")); + dimmInfo-> + maxClSupported_DDR + = DDR_CL_1_5; + break; + } + dimmInfo-> + maxCASlatencySupported_LoP + = + 1 + + (int) (5 * j / 10); + if (((5 * j) % 10) != 0) + dimmInfo-> + maxCASlatencySupported_RoP + = 5; + else + dimmInfo-> + maxCASlatencySupported_RoP + = 0; + DP (printf + ("Max. Cas Latencies (DDR LoP.RoP Notation): %d.%d \n", + dimmInfo-> + maxCASlatencySupported_LoP, + dimmInfo-> + maxCASlatencySupported_RoP)); + break; + case SDRAM: + /* CAS latency 1, 2, 3, 4, 5, 6, 7 */ + dimmInfo->maxClSupported_SD = j; /* Cas Latency DDR-RAM Coded */ + DP (printf + ("Max. Cas Latencies (SD): %d\n", + dimmInfo-> + maxClSupported_SD)); + dimmInfo-> + maxCASlatencySupported_LoP + = j; + dimmInfo-> + maxCASlatencySupported_RoP + = 0; + DP (printf + ("Max. Cas Latencies (DDR LoP.RoP Notation): %d.%d \n", + dimmInfo-> + maxCASlatencySupported_LoP, + dimmInfo-> + maxCASlatencySupported_RoP)); + break; + } + break; + } } - dimmInfo->maxCASlatencySupported_LoP = 1 + (int) (5 * j /10); - if (((5*j) % 10) != 0) - dimmInfo->maxCASlatencySupported_RoP = 5; - else - dimmInfo->maxCASlatencySupported_RoP = 0; - DP(printf("Max. Cas Latencies (DDR LoP.RoP Notation): %d.%d \n", dimmInfo->maxCASlatencySupported_LoP, dimmInfo->maxCASlatencySupported_RoP)); - break; - case SDRAM: - /* CAS latency 1, 2, 3, 4, 5, 6, 7 */ - dimmInfo->maxClSupported_SD = j; /* Cas Latency DDR-RAM Coded */ - DP(printf("Max. Cas Latencies (SD): %d\n", dimmInfo->maxClSupported_SD)); - dimmInfo->maxCASlatencySupported_LoP = j ; - dimmInfo->maxCASlatencySupported_RoP = 0; - DP(printf("Max. Cas Latencies (DDR LoP.RoP Notation): %d.%d \n", dimmInfo->maxCASlatencySupported_LoP, dimmInfo->maxCASlatencySupported_RoP)); - break; - } - break; - } - } - break; + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 21: /* Buffered Address And Control Inputs */ - DP(printf("\nModul Attributes (SPD Byte 21): \n")); - dimmInfo->bufferedAddrAndControlInputs = data[i] & BIT0; - dimmInfo->registeredAddrAndControlInputs = (data[i] & BIT1) >> 1; - dimmInfo->onCardPLL = (data[i] & BIT2) >> 2; - dimmInfo->bufferedDQMBinputs = (data[i] & BIT3) >> 3; - dimmInfo->registeredDQMBinputs = (data[i] & BIT4) >> 4; - dimmInfo->differentialClockInput = (data[i] & BIT5) >> 5; - dimmInfo->redundantRowAddressing = (data[i] & BIT6) >> 6; + case 21: /* Buffered Address And Control Inputs */ + DP (printf ("\nModul Attributes (SPD Byte 21): \n")); + dimmInfo->bufferedAddrAndControlInputs = + data[i] & BIT0; + dimmInfo->registeredAddrAndControlInputs = + (data[i] & BIT1) >> 1; + dimmInfo->onCardPLL = (data[i] & BIT2) >> 2; + dimmInfo->bufferedDQMBinputs = (data[i] & BIT3) >> 3; + dimmInfo->registeredDQMBinputs = + (data[i] & BIT4) >> 4; + dimmInfo->differentialClockInput = + (data[i] & BIT5) >> 5; + dimmInfo->redundantRowAddressing = + (data[i] & BIT6) >> 6; #ifdef DEBUG - if (dimmInfo->bufferedAddrAndControlInputs == 1) - DP(printf(" - Buffered Address/Control Input: Yes \n")); - else - DP(printf(" - Buffered Address/Control Input: No \n")); - - if (dimmInfo->registeredAddrAndControlInputs == 1) - DP(printf(" - Registered Address/Control Input: Yes \n")); - else - DP(printf(" - Registered Address/Control Input: No \n")); - - if (dimmInfo->onCardPLL == 1) - DP(printf(" - On-Card PLL (clock): Yes \n")); - else - DP(printf(" - On-Card PLL (clock): No \n")); - - if (dimmInfo->bufferedDQMBinputs == 1) - DP(printf(" - Bufferd DQMB Inputs: Yes \n")); - else - DP(printf(" - Bufferd DQMB Inputs: No \n")); - - if (dimmInfo->registeredDQMBinputs == 1) - DP(printf(" - Registered DQMB Inputs: Yes \n")); - else - DP(printf(" - Registered DQMB Inputs: No \n")); - - if (dimmInfo->differentialClockInput == 1) - DP(printf(" - Differential Clock Input: Yes \n")); - else - DP(printf(" - Differential Clock Input: No \n")); - - if (dimmInfo->redundantRowAddressing == 1) - DP(printf(" - redundant Row Addressing: Yes \n")); - else - DP(printf(" - redundant Row Addressing: No \n")); + if (dimmInfo->bufferedAddrAndControlInputs == 1) + DP (printf + (" - Buffered Address/Control Input: Yes \n")); + else + DP (printf + (" - Buffered Address/Control Input: No \n")); + + if (dimmInfo->registeredAddrAndControlInputs == 1) + DP (printf + (" - Registered Address/Control Input: Yes \n")); + else + DP (printf + (" - Registered Address/Control Input: No \n")); + + if (dimmInfo->onCardPLL == 1) + DP (printf + (" - On-Card PLL (clock): Yes \n")); + else + DP (printf + (" - On-Card PLL (clock): No \n")); + + if (dimmInfo->bufferedDQMBinputs == 1) + DP (printf + (" - Bufferd DQMB Inputs: Yes \n")); + else + DP (printf + (" - Bufferd DQMB Inputs: No \n")); + + if (dimmInfo->registeredDQMBinputs == 1) + DP (printf + (" - Registered DQMB Inputs: Yes \n")); + else + DP (printf + (" - Registered DQMB Inputs: No \n")); + + if (dimmInfo->differentialClockInput == 1) + DP (printf + (" - Differential Clock Input: Yes \n")); + else + DP (printf + (" - Differential Clock Input: No \n")); + + if (dimmInfo->redundantRowAddressing == 1) + DP (printf + (" - redundant Row Addressing: Yes \n")); + else + DP (printf + (" - redundant Row Addressing: No \n")); #endif - break; + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 22: /* Suported AutoPreCharge */ - DP(printf("\nModul Attributes (SPD Byte 22): \n")); - dimmInfo->suportedEarlyRasPreCharge= data[i] & BIT0; - dimmInfo->suportedAutoPreCharge = (data[i] & BIT1) >> 1; - dimmInfo->suportedPreChargeAll = (data[i] & BIT2) >> 2; - dimmInfo->suportedWrite1ReadBurst= (data[i] & BIT3) >> 3; - dimmInfo->suported5PercentLowVCC= (data[i] & BIT4) >> 4; - dimmInfo->suported5PercentUpperVCC= (data[i] & BIT5) >> 5; + case 22: /* Suported AutoPreCharge */ + DP (printf ("\nModul Attributes (SPD Byte 22): \n")); + dimmInfo->suportedEarlyRasPreCharge = data[i] & BIT0; + dimmInfo->suportedAutoPreCharge = + (data[i] & BIT1) >> 1; + dimmInfo->suportedPreChargeAll = + (data[i] & BIT2) >> 2; + dimmInfo->suportedWrite1ReadBurst = + (data[i] & BIT3) >> 3; + dimmInfo->suported5PercentLowVCC = + (data[i] & BIT4) >> 4; + dimmInfo->suported5PercentUpperVCC = + (data[i] & BIT5) >> 5; #ifdef DEBUG - if (dimmInfo->suportedEarlyRasPreCharge == 1) - DP(printf(" - Early Ras Precharge: Yes \n")); - else - DP(printf(" - Early Ras Precharge: No \n")); - - if (dimmInfo->suportedAutoPreCharge == 1) - DP(printf(" - AutoPreCharge: Yes \n")); - else - DP(printf(" - AutoPreCharge: No \n")); - - if (dimmInfo->suportedPreChargeAll == 1) - DP(printf(" - Precharge All: Yes \n")); - else - DP(printf(" - Precharge All: No \n")); - - if (dimmInfo->suportedWrite1ReadBurst == 1) - DP(printf(" - Write 1/ReadBurst: Yes \n")); - else - DP(printf(" - Write 1/ReadBurst: No \n")); - - if (dimmInfo->suported5PercentLowVCC == 1) - DP(printf(" - lower VCC tolerance: 5 Percent \n")); - else - DP(printf(" - lower VCC tolerance: 10 Percent \n")); - - if (dimmInfo->suported5PercentUpperVCC == 1) - DP(printf(" - upper VCC tolerance: 5 Percent \n")); - else - DP(printf(" - upper VCC tolerance: 10 Percent \n")); + if (dimmInfo->suportedEarlyRasPreCharge == 1) + DP (printf + (" - Early Ras Precharge: Yes \n")); + else + DP (printf + (" - Early Ras Precharge: No \n")); + + if (dimmInfo->suportedAutoPreCharge == 1) + DP (printf + (" - AutoPreCharge: Yes \n")); + else + DP (printf + (" - AutoPreCharge: No \n")); + + if (dimmInfo->suportedPreChargeAll == 1) + DP (printf + (" - Precharge All: Yes \n")); + else + DP (printf + (" - Precharge All: No \n")); + + if (dimmInfo->suportedWrite1ReadBurst == 1) + DP (printf + (" - Write 1/ReadBurst: Yes \n")); + else + DP (printf + (" - Write 1/ReadBurst: No \n")); + + if (dimmInfo->suported5PercentLowVCC == 1) + DP (printf + (" - lower VCC tolerance: 5 Percent \n")); + else + DP (printf + (" - lower VCC tolerance: 10 Percent \n")); + + if (dimmInfo->suported5PercentUpperVCC == 1) + DP (printf + (" - upper VCC tolerance: 5 Percent \n")); + else + DP (printf + (" - upper VCC tolerance: 10 Percent \n")); #endif - break; + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 23: /* Minimum Cycle Time At Maximum Cas Latancy Minus 1 (2nd highest CL) */ - shift = (dimmInfo->memoryType == DDR)? 4:2; - mult = (dimmInfo->memoryType == DDR)? 10:25; - maskLeftOfPoint = (dimmInfo->memoryType == DDR)? 0xf0:0xfc; - maskRightOfPoint = (dimmInfo->memoryType == DDR)? 0xf:0x03; - leftOfPoint = (data[i] & maskLeftOfPoint) >> shift; - rightOfPoint = (data[i] & maskRightOfPoint)* mult; - dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus1_LoP = leftOfPoint; - dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus1_RoP = rightOfPoint; - DP(printf("Minimum Cycle Time At 2nd highest CasLatancy (0 = Not supported): %d.%d [ns]\n",leftOfPoint, rightOfPoint )); - /*dimmInfo->minimumCycleTimeAtMaxCasLatancy*/ - break; + case 23: /* Minimum Cycle Time At Maximum Cas Latancy Minus 1 (2nd highest CL) */ + shift = (dimmInfo->memoryType == DDR) ? 4 : 2; + mult = (dimmInfo->memoryType == DDR) ? 10 : 25; + maskLeftOfPoint = + (dimmInfo->memoryType == DDR) ? 0xf0 : 0xfc; + maskRightOfPoint = + (dimmInfo->memoryType == DDR) ? 0xf : 0x03; + leftOfPoint = (data[i] & maskLeftOfPoint) >> shift; + rightOfPoint = (data[i] & maskRightOfPoint) * mult; + dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus1_LoP = + leftOfPoint; + dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus1_RoP = + rightOfPoint; + DP (printf + ("Minimum Cycle Time At 2nd highest CasLatancy (0 = Not supported): %d.%d [ns]\n", + leftOfPoint, rightOfPoint)); + /*dimmInfo->minimumCycleTimeAtMaxCasLatancy */ + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 24: /* Clock To Data Out 2nd highest Cas Latency Value*/ - div = (dimmInfo->memoryType == DDR)? 100:10; - time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f)); - leftOfPoint = time_tmp / div; - rightOfPoint = time_tmp % div; - dimmInfo->clockToDataOutMinus1_LoP = leftOfPoint; - dimmInfo->clockToDataOutMinus1_RoP = rightOfPoint; - DP(printf("Clock To Data Out (2nd CL value): %d.%2d [ns]\n",leftOfPoint, rightOfPoint )); - break; + case 24: /* Clock To Data Out 2nd highest Cas Latency Value */ + div = (dimmInfo->memoryType == DDR) ? 100 : 10; + time_tmp = + (((data[i] & 0xf0) >> 4) * 10) + + ((data[i] & 0x0f)); + leftOfPoint = time_tmp / div; + rightOfPoint = time_tmp % div; + dimmInfo->clockToDataOutMinus1_LoP = leftOfPoint; + dimmInfo->clockToDataOutMinus1_RoP = rightOfPoint; + DP (printf + ("Clock To Data Out (2nd CL value): %d.%2d [ns]\n", + leftOfPoint, rightOfPoint)); + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 25: /* Minimum Cycle Time At Maximum Cas Latancy Minus 2 (3rd highest CL) */ - shift = (dimmInfo->memoryType == DDR)? 4:2; - mult = (dimmInfo->memoryType == DDR)? 10:25; - maskLeftOfPoint = (dimmInfo->memoryType == DDR)? 0xf0:0xfc; - maskRightOfPoint = (dimmInfo->memoryType == DDR)? 0xf:0x03; - leftOfPoint = (data[i] & maskLeftOfPoint) >> shift; - rightOfPoint = (data[i] & maskRightOfPoint)* mult; - dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus2_LoP = leftOfPoint; - dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus2_RoP = rightOfPoint; - DP(printf("Minimum Cycle Time At 3rd highest CasLatancy (0 = Not supported): %d.%d [ns]\n",leftOfPoint, rightOfPoint )); - /*dimmInfo->minimumCycleTimeAtMaxCasLatancy*/ - break; + case 25: /* Minimum Cycle Time At Maximum Cas Latancy Minus 2 (3rd highest CL) */ + shift = (dimmInfo->memoryType == DDR) ? 4 : 2; + mult = (dimmInfo->memoryType == DDR) ? 10 : 25; + maskLeftOfPoint = + (dimmInfo->memoryType == DDR) ? 0xf0 : 0xfc; + maskRightOfPoint = + (dimmInfo->memoryType == DDR) ? 0xf : 0x03; + leftOfPoint = (data[i] & maskLeftOfPoint) >> shift; + rightOfPoint = (data[i] & maskRightOfPoint) * mult; + dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus2_LoP = + leftOfPoint; + dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus2_RoP = + rightOfPoint; + DP (printf + ("Minimum Cycle Time At 3rd highest CasLatancy (0 = Not supported): %d.%d [ns]\n", + leftOfPoint, rightOfPoint)); + /*dimmInfo->minimumCycleTimeAtMaxCasLatancy */ + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 26: /* Clock To Data Out 3rd highest Cas Latency Value*/ - div = (dimmInfo->memoryType == DDR)? 100:10; - time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f)); - leftOfPoint = time_tmp / div; - rightOfPoint = time_tmp % div; - dimmInfo->clockToDataOutMinus2_LoP = leftOfPoint; - dimmInfo->clockToDataOutMinus2_RoP = rightOfPoint; - DP(printf("Clock To Data Out (3rd CL value): %d.%2d [ns]\n",leftOfPoint, rightOfPoint )); - break; + case 26: /* Clock To Data Out 3rd highest Cas Latency Value */ + div = (dimmInfo->memoryType == DDR) ? 100 : 10; + time_tmp = + (((data[i] & 0xf0) >> 4) * 10) + + ((data[i] & 0x0f)); + leftOfPoint = time_tmp / div; + rightOfPoint = time_tmp % div; + dimmInfo->clockToDataOutMinus2_LoP = leftOfPoint; + dimmInfo->clockToDataOutMinus2_RoP = rightOfPoint; + DP (printf + ("Clock To Data Out (3rd CL value): %d.%2d [ns]\n", + leftOfPoint, rightOfPoint)); + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 27: /* Minimum Row Precharge Time */ - shift = (dimmInfo->memoryType == DDR)? 2:0; - maskLeftOfPoint = (dimmInfo->memoryType == DDR)? 0xfc:0xff; - maskRightOfPoint = (dimmInfo->memoryType == DDR)? 0x03:0x00; - leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift); - rightOfPoint = (data[i] & maskRightOfPoint)*25; - - dimmInfo->minRowPrechargeTime = ((leftOfPoint*100) + rightOfPoint); /* measured in n times 10ps Intervals */ - trp_clocks = (dimmInfo->minRowPrechargeTime + (tmemclk-1)) / tmemclk; - DP(printf("*** 1 clock cycle = %ld 10ps intervalls = %ld.%ld ns****\n", tmemclk, tmemclk/100, tmemclk%100 )); - DP(printf("Minimum Row Precharge Time [ns]: %d.%2d = in Clk cycles %d\n", leftOfPoint, rightOfPoint, trp_clocks)); - break; + case 27: /* Minimum Row Precharge Time */ + shift = (dimmInfo->memoryType == DDR) ? 2 : 0; + maskLeftOfPoint = + (dimmInfo->memoryType == DDR) ? 0xfc : 0xff; + maskRightOfPoint = + (dimmInfo->memoryType == DDR) ? 0x03 : 0x00; + leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift); + rightOfPoint = (data[i] & maskRightOfPoint) * 25; + + dimmInfo->minRowPrechargeTime = ((leftOfPoint * 100) + rightOfPoint); /* measured in n times 10ps Intervals */ + trp_clocks = + (dimmInfo->minRowPrechargeTime + + (tmemclk - 1)) / tmemclk; + DP (printf + ("*** 1 clock cycle = %ld 10ps intervalls = %ld.%ld ns****\n", + tmemclk, tmemclk / 100, tmemclk % 100)); + DP (printf + ("Minimum Row Precharge Time [ns]: %d.%2d = in Clk cycles %d\n", + leftOfPoint, rightOfPoint, trp_clocks)); + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 28: /* Minimum Row Active to Row Active Time */ - shift = (dimmInfo->memoryType == DDR)? 2:0; - maskLeftOfPoint = (dimmInfo->memoryType == DDR)? 0xfc:0xff; - maskRightOfPoint = (dimmInfo->memoryType == DDR)? 0x03:0x00; - leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift); - rightOfPoint = (data[i] & maskRightOfPoint)*25; - - dimmInfo->minRowActiveRowActiveDelay = ((leftOfPoint*100) + rightOfPoint); /* measured in 100ns Intervals */ - trrd_clocks = (dimmInfo->minRowActiveRowActiveDelay + (tmemclk-1)) / tmemclk; - DP(printf("Minimum Row Active -To- Row Active Delay [ns]: %d.%2d = in Clk cycles %d\n", leftOfPoint, rightOfPoint, trp_clocks)); - break; + case 28: /* Minimum Row Active to Row Active Time */ + shift = (dimmInfo->memoryType == DDR) ? 2 : 0; + maskLeftOfPoint = + (dimmInfo->memoryType == DDR) ? 0xfc : 0xff; + maskRightOfPoint = + (dimmInfo->memoryType == DDR) ? 0x03 : 0x00; + leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift); + rightOfPoint = (data[i] & maskRightOfPoint) * 25; + + dimmInfo->minRowActiveRowActiveDelay = ((leftOfPoint * 100) + rightOfPoint); /* measured in 100ns Intervals */ + trrd_clocks = + (dimmInfo->minRowActiveRowActiveDelay + + (tmemclk - 1)) / tmemclk; + DP (printf + ("Minimum Row Active -To- Row Active Delay [ns]: %d.%2d = in Clk cycles %d\n", + leftOfPoint, rightOfPoint, trp_clocks)); + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 29: /* Minimum Ras-To-Cas Delay */ - shift = (dimmInfo->memoryType == DDR)? 2:0; - maskLeftOfPoint = (dimmInfo->memoryType == DDR)? 0xfc:0xff; - maskRightOfPoint = (dimmInfo->memoryType == DDR)? 0x03:0x00; - leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift); - rightOfPoint = (data[i] & maskRightOfPoint)*25; - - dimmInfo->minRowActiveRowActiveDelay = ((leftOfPoint*100) + rightOfPoint); /* measured in 100ns Intervals */ - trcd_clocks = (dimmInfo->minRowActiveRowActiveDelay + (tmemclk-1) )/ tmemclk; - DP(printf("Minimum Ras-To-Cas Delay [ns]: %d.%2d = in Clk cycles %d\n", leftOfPoint, rightOfPoint, trp_clocks)); - break; + case 29: /* Minimum Ras-To-Cas Delay */ + shift = (dimmInfo->memoryType == DDR) ? 2 : 0; + maskLeftOfPoint = + (dimmInfo->memoryType == DDR) ? 0xfc : 0xff; + maskRightOfPoint = + (dimmInfo->memoryType == DDR) ? 0x03 : 0x00; + leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift); + rightOfPoint = (data[i] & maskRightOfPoint) * 25; + + dimmInfo->minRowActiveRowActiveDelay = ((leftOfPoint * 100) + rightOfPoint); /* measured in 100ns Intervals */ + trcd_clocks = + (dimmInfo->minRowActiveRowActiveDelay + + (tmemclk - 1)) / tmemclk; + DP (printf + ("Minimum Ras-To-Cas Delay [ns]: %d.%2d = in Clk cycles %d\n", + leftOfPoint, rightOfPoint, trp_clocks)); + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 30: /* Minimum Ras Pulse Width */ - dimmInfo->minRasPulseWidth = data[i]; - tras_clocks = (NSto10PS(data[i])+(tmemclk-1)) / tmemclk; - DP(printf("Minimum Ras Pulse Width [ns]: %d = in Clk cycles %d\n", dimmInfo->minRasPulseWidth, tras_clocks)); + case 30: /* Minimum Ras Pulse Width */ + dimmInfo->minRasPulseWidth = data[i]; + tras_clocks = + (NSto10PS (data[i]) + + (tmemclk - 1)) / tmemclk; + DP (printf + ("Minimum Ras Pulse Width [ns]: %d = in Clk cycles %d\n", + dimmInfo->minRasPulseWidth, tras_clocks)); - break; + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 31: /* Module Bank Density */ - dimmInfo->moduleBankDensity = data[i]; - DP(printf("Module Bank Density: %d\n", dimmInfo->moduleBankDensity)); + case 31: /* Module Bank Density */ + dimmInfo->moduleBankDensity = data[i]; + DP (printf + ("Module Bank Density: %d\n", + dimmInfo->moduleBankDensity)); #ifdef DEBUG - DP(printf("*** Offered Densities (more than 1 = Multisize-Module): ")); - { - if (dimmInfo->moduleBankDensity & 1) - DP(printf("4MB, ")); - if (dimmInfo->moduleBankDensity & 2) - DP(printf("8MB, ")); - if (dimmInfo->moduleBankDensity & 4) - DP(printf("16MB, ")); - if (dimmInfo->moduleBankDensity & 8) - DP(printf("32MB, ")); - if (dimmInfo->moduleBankDensity & 16) - DP(printf("64MB, ")); - if (dimmInfo->moduleBankDensity & 32) - DP(printf("128MB, ")); - if ((dimmInfo->moduleBankDensity & 64) || (dimmInfo->moduleBankDensity & 128)) { - DP(printf("ERROR, ")); - hang(); + DP (printf + ("*** Offered Densities (more than 1 = Multisize-Module): ")); + { + if (dimmInfo->moduleBankDensity & 1) + DP (printf ("4MB, ")); + if (dimmInfo->moduleBankDensity & 2) + DP (printf ("8MB, ")); + if (dimmInfo->moduleBankDensity & 4) + DP (printf ("16MB, ")); + if (dimmInfo->moduleBankDensity & 8) + DP (printf ("32MB, ")); + if (dimmInfo->moduleBankDensity & 16) + DP (printf ("64MB, ")); + if (dimmInfo->moduleBankDensity & 32) + DP (printf ("128MB, ")); + if ((dimmInfo->moduleBankDensity & 64) + || (dimmInfo->moduleBankDensity & 128)) { + DP (printf ("ERROR, ")); + hang (); + } } - } - DP(printf("\n")); + DP (printf ("\n")); #endif - break; + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 32: /* Address And Command Setup Time (measured in ns/1000) */ - sign = 1; - switch(dimmInfo->memoryType) - { - case DDR: - time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f)); - leftOfPoint = time_tmp / 100; - rightOfPoint = time_tmp % 100; - break; - case SDRAM: - leftOfPoint = (data[i] & 0xf0) >> 4; - if(leftOfPoint > 7) - { - leftOfPoint = data[i] & 0x70 >> 4; - sign = -1; - } - rightOfPoint = (data[i] & 0x0f); - break; - } - dimmInfo->addrAndCommandSetupTime = (leftOfPoint*100 + rightOfPoint) * sign; - DP(printf("Address And Command Setup Time [ns]: %d.%d\n", sign*leftOfPoint, rightOfPoint)); - break; + case 32: /* Address And Command Setup Time (measured in ns/1000) */ + sign = 1; + switch (dimmInfo->memoryType) { + case DDR: + time_tmp = + (((data[i] & 0xf0) >> 4) * 10) + + ((data[i] & 0x0f)); + leftOfPoint = time_tmp / 100; + rightOfPoint = time_tmp % 100; + break; + case SDRAM: + leftOfPoint = (data[i] & 0xf0) >> 4; + if (leftOfPoint > 7) { + leftOfPoint = data[i] & 0x70 >> 4; + sign = -1; + } + rightOfPoint = (data[i] & 0x0f); + break; + } + dimmInfo->addrAndCommandSetupTime = + (leftOfPoint * 100 + rightOfPoint) * sign; + DP (printf + ("Address And Command Setup Time [ns]: %d.%d\n", + sign * leftOfPoint, rightOfPoint)); + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 33: /* Address And Command Hold Time */ - sign = 1; - switch(dimmInfo->memoryType) - { - case DDR: - time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f)); - leftOfPoint = time_tmp / 100; - rightOfPoint = time_tmp % 100; - break; - case SDRAM: - leftOfPoint = (data[i] & 0xf0) >> 4; - if(leftOfPoint > 7) - { - leftOfPoint = data[i] & 0x70 >> 4; - sign = -1; - } - rightOfPoint = (data[i] & 0x0f) ; - break; - } - dimmInfo->addrAndCommandHoldTime = (leftOfPoint * 100 + rightOfPoint) * sign; - DP(printf("Address And Command Hold Time [ns]: %d.%d\n", sign*leftOfPoint, rightOfPoint)); - break; + case 33: /* Address And Command Hold Time */ + sign = 1; + switch (dimmInfo->memoryType) { + case DDR: + time_tmp = + (((data[i] & 0xf0) >> 4) * 10) + + ((data[i] & 0x0f)); + leftOfPoint = time_tmp / 100; + rightOfPoint = time_tmp % 100; + break; + case SDRAM: + leftOfPoint = (data[i] & 0xf0) >> 4; + if (leftOfPoint > 7) { + leftOfPoint = data[i] & 0x70 >> 4; + sign = -1; + } + rightOfPoint = (data[i] & 0x0f); + break; + } + dimmInfo->addrAndCommandHoldTime = + (leftOfPoint * 100 + rightOfPoint) * sign; + DP (printf + ("Address And Command Hold Time [ns]: %d.%d\n", + sign * leftOfPoint, rightOfPoint)); + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 34: /* Data Input Setup Time */ - sign = 1; - switch(dimmInfo->memoryType) - { - case DDR: - time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f)); - leftOfPoint = time_tmp / 100; - rightOfPoint = time_tmp % 100; - break; - case SDRAM: - leftOfPoint = (data[i] & 0xf0) >> 4; - if( leftOfPoint > 7) - { - leftOfPoint = data[i] & 0x70 >> 4; - sign = -1; - } - rightOfPoint = (data[i] & 0x0f ); - break; - } - dimmInfo->dataInputSetupTime = (leftOfPoint *100 + rightOfPoint) * sign; - DP(printf("Data Input Setup Time [ns]: %d.%d\n", sign*leftOfPoint, rightOfPoint)); - break; + case 34: /* Data Input Setup Time */ + sign = 1; + switch (dimmInfo->memoryType) { + case DDR: + time_tmp = + (((data[i] & 0xf0) >> 4) * 10) + + ((data[i] & 0x0f)); + leftOfPoint = time_tmp / 100; + rightOfPoint = time_tmp % 100; + break; + case SDRAM: + leftOfPoint = (data[i] & 0xf0) >> 4; + if (leftOfPoint > 7) { + leftOfPoint = data[i] & 0x70 >> 4; + sign = -1; + } + rightOfPoint = (data[i] & 0x0f); + break; + } + dimmInfo->dataInputSetupTime = + (leftOfPoint * 100 + rightOfPoint) * sign; + DP (printf + ("Data Input Setup Time [ns]: %d.%d\n", + sign * leftOfPoint, rightOfPoint)); + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 35: /* Data Input Hold Time */ - sign = 1; - switch(dimmInfo->memoryType) - { - case DDR: - time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f)); - leftOfPoint = time_tmp / 100; - rightOfPoint = time_tmp % 100; - break; - case SDRAM: - leftOfPoint = (data[i] & 0xf0) >> 4; - if( leftOfPoint > 7) - { - leftOfPoint = data[i] & 0x70 >> 4; - sign = -1; - } - rightOfPoint = (data[i] & 0x0f) ; - break; - } - dimmInfo->dataInputHoldTime = (leftOfPoint *100 + rightOfPoint) * sign; - DP(printf("Data Input Hold Time [ns]: %d.%d\n\n", sign*leftOfPoint, rightOfPoint)); - break; + case 35: /* Data Input Hold Time */ + sign = 1; + switch (dimmInfo->memoryType) { + case DDR: + time_tmp = + (((data[i] & 0xf0) >> 4) * 10) + + ((data[i] & 0x0f)); + leftOfPoint = time_tmp / 100; + rightOfPoint = time_tmp % 100; + break; + case SDRAM: + leftOfPoint = (data[i] & 0xf0) >> 4; + if (leftOfPoint > 7) { + leftOfPoint = data[i] & 0x70 >> 4; + sign = -1; + } + rightOfPoint = (data[i] & 0x0f); + break; + } + dimmInfo->dataInputHoldTime = + (leftOfPoint * 100 + rightOfPoint) * sign; + DP (printf + ("Data Input Hold Time [ns]: %d.%d\n\n", + sign * leftOfPoint, rightOfPoint)); + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - } - } - /* calculating the sdram density */ - for(i = 0;i < dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses;i++) - { - density = density*2; - } - dimmInfo->deviceDensity = density*dimmInfo->numOfBanksOnEachDevice* - dimmInfo->sdramWidth; - dimmInfo->numberOfDevices = (dimmInfo->dataWidth / dimmInfo->sdramWidth)* - dimmInfo->numOfModuleBanks; - devicesForErrCheck = (dimmInfo->dataWidth - 64) / dimmInfo->sdramWidth ; - if((dimmInfo->errorCheckType == 0x1) || - (dimmInfo->errorCheckType == 0x2) || - (dimmInfo->errorCheckType == 0x3)) - { - dimmInfo->size = (dimmInfo->deviceDensity / 8)* - (dimmInfo->numberOfDevices - devicesForErrCheck); - } - else - { - dimmInfo->size = (dimmInfo->deviceDensity/8)*dimmInfo->numberOfDevices; - } + } + } + /* calculating the sdram density */ + for (i = 0; + i < dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses; + i++) { + density = density * 2; + } + dimmInfo->deviceDensity = density * dimmInfo->numOfBanksOnEachDevice * + dimmInfo->sdramWidth; + dimmInfo->numberOfDevices = + (dimmInfo->dataWidth / dimmInfo->sdramWidth) * + dimmInfo->numOfModuleBanks; + devicesForErrCheck = + (dimmInfo->dataWidth - 64) / dimmInfo->sdramWidth; + if ((dimmInfo->errorCheckType == 0x1) + || (dimmInfo->errorCheckType == 0x2) + || (dimmInfo->errorCheckType == 0x3)) { + dimmInfo->size = + (dimmInfo->deviceDensity / 8) * + (dimmInfo->numberOfDevices - devicesForErrCheck); + } else { + dimmInfo->size = + (dimmInfo->deviceDensity / 8) * + dimmInfo->numberOfDevices; + } - /* compute the module DRB size */ - tmp = (1 << (dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses)); - tmp *= dimmInfo->numOfModuleBanks; - tmp *= dimmInfo->sdramWidth; - tmp = tmp >> 24; /* div by 0x4000000 (64M) */ - dimmInfo->drb_size = (uchar)tmp; - DP(printf("Module DRB size (n*64Mbit): %d\n", dimmInfo->drb_size)); + /* compute the module DRB size */ + tmp = (1 << + (dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses)); + tmp *= dimmInfo->numOfModuleBanks; + tmp *= dimmInfo->sdramWidth; + tmp = tmp >> 24; /* div by 0x4000000 (64M) */ + dimmInfo->drb_size = (uchar) tmp; + DP (printf ("Module DRB size (n*64Mbit): %d\n", dimmInfo->drb_size)); /* try a CAS latency of 3 first... */ @@ -1010,44 +1222,43 @@ check_dimm(uchar slot, AUX_MEM_DIMM_INFO *dimmInfo) cal_val = 0; if (supp_cal & 8) { - if (NS10to10PS(data[9]) <= tmemclk) + if (NS10to10PS (data[9]) <= tmemclk) cal_val = 6; } if (supp_cal & 4) { - if (NS10to10PS(data[9]) <= tmemclk) + if (NS10to10PS (data[9]) <= tmemclk) cal_val = 5; } /* then 2... */ if (supp_cal & 2) { - if (NS10to10PS(data[23]) <= tmemclk) + if (NS10to10PS (data[23]) <= tmemclk) cal_val = 4; } - DP(printf("cal_val = %d\n", cal_val*5)); + DP (printf ("cal_val = %d\n", cal_val * 5)); /* bummer, did't work... */ if (cal_val == 0) { - DP(printf("Couldn't find a good CAS latency\n")); - hang(); + DP (printf ("Couldn't find a good CAS latency\n")); + hang (); return 0; } - return true; + return true; } /* sets up the GT properly with information passed in */ -int -setup_sdram(AUX_MEM_DIMM_INFO *info) +int setup_sdram (AUX_MEM_DIMM_INFO * info) { - ulong tmp, check; - ulong tmp_sdram_mode=0; /* 0x141c*/ - ulong tmp_dunit_control_low=0; /* 0x1404*/ + ulong tmp; + ulong tmp_sdram_mode = 0; /* 0x141c */ + ulong tmp_dunit_control_low = 0; /* 0x1404 */ int i; /* sanity checking */ - if (! info->numOfModuleBanks) { - printf("setup_sdram called with 0 banks\n"); + if (!info->numOfModuleBanks) { + printf ("setup_sdram called with 0 banks\n"); return 1; } @@ -1055,137 +1266,150 @@ setup_sdram(AUX_MEM_DIMM_INFO *info) /* Program the GT with the discovered data */ if (info->registeredAddrAndControlInputs == true) - DP(printf("Module is registered, but we do not support registered Modules !!!\n")); + DP (printf + ("Module is registered, but we do not support registered Modules !!!\n")); /* delay line */ - set_dfcdlInit(); /* may be its not needed */ - DP(printf("Delay line set done\n")); - - /* set SDRAM mode NOP*/ /* To_do check it*/ - GT_REG_WRITE(SDRAM_OPERATION, 0x5); - while (GTREGREAD(SDRAM_OPERATION) != 0) { - DP(printf("\n*** SDRAM_OPERATION 1418: Module still busy ... please wait... ***\n")); - } + set_dfcdlInit (); /* may be its not needed */ + DP (printf ("Delay line set done\n")); + + /* set SDRAM mode NOP */ /* To_do check it */ + GT_REG_WRITE (SDRAM_OPERATION, 0x5); + while (GTREGREAD (SDRAM_OPERATION) != 0) { + DP (printf + ("\n*** SDRAM_OPERATION 1418: Module still busy ... please wait... ***\n")); + } /* SDRAM configuration */ - GT_REG_WRITE(SDRAM_CONFIG, 0x58200400); - DP(printf("sdram_conf 0x1400: %08x\n", GTREGREAD(SDRAM_CONFIG))); + GT_REG_WRITE (SDRAM_CONFIG, 0x58200400); + DP (printf ("sdram_conf 0x1400: %08x\n", GTREGREAD (SDRAM_CONFIG))); - /* SDRAM open pages controll keep open as much as I can*/ - GT_REG_WRITE(SDRAM_OPEN_PAGES_CONTROL, 0x0); - DP(printf("sdram_open_pages_controll 0x1414: %08x\n", GTREGREAD(SDRAM_OPEN_PAGES_CONTROL))); + /* SDRAM open pages controll keep open as much as I can */ + GT_REG_WRITE (SDRAM_OPEN_PAGES_CONTROL, 0x0); + DP (printf + ("sdram_open_pages_controll 0x1414: %08x\n", + GTREGREAD (SDRAM_OPEN_PAGES_CONTROL))); /* SDRAM D_UNIT_CONTROL_LOW 0x1404 */ - tmp = (GTREGREAD(D_UNIT_CONTROL_LOW) & 0x01); /* Clock Domain Sync from power on reset*/ + tmp = (GTREGREAD (D_UNIT_CONTROL_LOW) & 0x01); /* Clock Domain Sync from power on reset */ if (tmp == 0) - DP(printf("Core Signals are sync (by HW-Setting)!!!\n")); + DP (printf ("Core Signals are sync (by HW-Setting)!!!\n")); else - DP(printf("Core Signals syncs. are bypassed (by HW-Setting)!!!\n")); - - /* SDRAM set CAS Lentency according to SPD information*/ - switch(info->memoryType) - { - case SDRAM: - DP(printf("### SD-RAM not supported yet !!!\n")); - hang(); - /* ToDo fill SD-RAM if needed !!!!!*/ - break; - - case DDR: - DP(printf("### SET-CL for DDR-RAM\n")); - - switch (info->maxClSupported_DDR) - { - case DDR_CL_3: - tmp_dunit_control_low = 0x3c000000; /* Read-Data sampled on falling edge of Clk*/ - tmp_sdram_mode = 0x32; /* CL=3 Burstlength = 4*/ - DP(printf("Max. CL is 3 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low )); - break; - - case DDR_CL_2_5: - if (tmp == 1) /* clocks sync*/ - { - tmp_dunit_control_low = 0x24000000; /* Read-Data sampled on falling edge of Clk*/ - tmp_sdram_mode = 0x62; /* CL=2,5 Burstlength = 4*/ - DP(printf("Max. CL is 2,5s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low )); - } - else /* clk sync. bypassed */ - { - tmp_dunit_control_low = 0x03000000; /* Read-Data sampled on rising edge of Clk*/ - tmp_sdram_mode = 0x62; /* CL=2,5 Burstlength = 4*/ - DP(printf("Max. CL is 2,5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low )); - } + DP (printf + ("Core Signals syncs. are bypassed (by HW-Setting)!!!\n")); + + /* SDRAM set CAS Lentency according to SPD information */ + switch (info->memoryType) { + case SDRAM: + DP (printf ("### SD-RAM not supported yet !!!\n")); + hang (); + /* ToDo fill SD-RAM if needed !!!!! */ break; - case DDR_CL_2: - if (tmp == 1) /* Sync*/ - { - tmp_dunit_control_low = 0x03000000; /* Read-Data sampled on rising edge of Clk*/ - tmp_sdram_mode = 0x22; /* CL=2 Burstlength = 4*/ - DP(printf("Max. CL is 2s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low )); - } - else /* Not sync. */ - { - tmp_dunit_control_low = 0x3b000000; /* Read-Data sampled on rising edge of Clk*/ - tmp_sdram_mode = 0x22; /* CL=2 Burstlength = 4*/ - DP(printf("Max. CL is 2 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low )); - } - break; - - case DDR_CL_1_5: - if (tmp == 1) /* Sync*/ - { - tmp_dunit_control_low = 0x23000000; /* Read-Data sampled on falling edge of Clk*/ - tmp_sdram_mode = 0x52; /* CL=1,5 Burstlength = 4*/ - DP(printf("Max. CL is 1,5s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low )); - } - else /* not sync*/ - { - tmp_dunit_control_low = 0x1a000000; /* Read-Data sampled on rising edge of Clk*/ - tmp_sdram_mode = 0x52; /* CL=1,5 Burstlength = 4*/ - DP(printf("Max. CL is 1,5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low )); - } - break; + case DDR: + DP (printf ("### SET-CL for DDR-RAM\n")); + + switch (info->maxClSupported_DDR) { + case DDR_CL_3: + tmp_dunit_control_low = 0x3c000000; /* Read-Data sampled on falling edge of Clk */ + tmp_sdram_mode = 0x32; /* CL=3 Burstlength = 4 */ + DP (printf + ("Max. CL is 3 CLKs 0x141c= %08lx, 0x1404 = %08lx\n", + tmp_sdram_mode, tmp_dunit_control_low)); + break; + + case DDR_CL_2_5: + if (tmp == 1) { /* clocks sync */ + tmp_dunit_control_low = 0x24000000; /* Read-Data sampled on falling edge of Clk */ + tmp_sdram_mode = 0x62; /* CL=2,5 Burstlength = 4 */ + DP (printf + ("Max. CL is 2,5s CLKs 0x141c= %08lx, 0x1404 = %08lx\n", + tmp_sdram_mode, tmp_dunit_control_low)); + } else { /* clk sync. bypassed */ + + tmp_dunit_control_low = 0x03000000; /* Read-Data sampled on rising edge of Clk */ + tmp_sdram_mode = 0x62; /* CL=2,5 Burstlength = 4 */ + DP (printf + ("Max. CL is 2,5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n", + tmp_sdram_mode, tmp_dunit_control_low)); + } + break; + + case DDR_CL_2: + if (tmp == 1) { /* Sync */ + tmp_dunit_control_low = 0x03000000; /* Read-Data sampled on rising edge of Clk */ + tmp_sdram_mode = 0x22; /* CL=2 Burstlength = 4 */ + DP (printf + ("Max. CL is 2s CLKs 0x141c= %08lx, 0x1404 = %08lx\n", + tmp_sdram_mode, tmp_dunit_control_low)); + } else { /* Not sync. */ + + tmp_dunit_control_low = 0x3b000000; /* Read-Data sampled on rising edge of Clk */ + tmp_sdram_mode = 0x22; /* CL=2 Burstlength = 4 */ + DP (printf + ("Max. CL is 2 CLKs 0x141c= %08lx, 0x1404 = %08lx\n", + tmp_sdram_mode, tmp_dunit_control_low)); + } + break; + + case DDR_CL_1_5: + if (tmp == 1) { /* Sync */ + tmp_dunit_control_low = 0x23000000; /* Read-Data sampled on falling edge of Clk */ + tmp_sdram_mode = 0x52; /* CL=1,5 Burstlength = 4 */ + DP (printf + ("Max. CL is 1,5s CLKs 0x141c= %08lx, 0x1404 = %08lx\n", + tmp_sdram_mode, tmp_dunit_control_low)); + } else { /* not sync */ + + tmp_dunit_control_low = 0x1a000000; /* Read-Data sampled on rising edge of Clk */ + tmp_sdram_mode = 0x52; /* CL=1,5 Burstlength = 4 */ + DP (printf + ("Max. CL is 1,5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n", + tmp_sdram_mode, tmp_dunit_control_low)); + } + break; - default: - printf("Max. CL is out of range %d\n", info->maxClSupported_DDR); - hang(); + default: + printf ("Max. CL is out of range %d\n", + info->maxClSupported_DDR); + hang (); + break; + } break; - } - break; - } + } /* Write results of CL detection procedure */ - GT_REG_WRITE(SDRAM_MODE, tmp_sdram_mode); - /* set SDRAM mode SetCommand 0x1418*/ - GT_REG_WRITE(SDRAM_OPERATION, 0x3); - while (GTREGREAD(SDRAM_OPERATION) != 0) { - DP(printf("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n")); - } + GT_REG_WRITE (SDRAM_MODE, tmp_sdram_mode); + /* set SDRAM mode SetCommand 0x1418 */ + GT_REG_WRITE (SDRAM_OPERATION, 0x3); + while (GTREGREAD (SDRAM_OPERATION) != 0) { + DP (printf + ("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n")); + } /* SDRAM D_UNIT_CONTROL_LOW 0x1404 */ - tmp = (GTREGREAD(D_UNIT_CONTROL_LOW) & 0x01); /* Clock Domain Sync from power on reset*/ - if (tmp != 1) /*clocks are not sync*/ - { - /* asyncmode*/ - GT_REG_WRITE(D_UNIT_CONTROL_LOW , - (GTREGREAD(D_UNIT_CONTROL_LOW) & 0x7F) | 0x18110780 | tmp_dunit_control_low ); - } - else - { - /* syncmode*/ - GT_REG_WRITE(D_UNIT_CONTROL_LOW , - (GTREGREAD(D_UNIT_CONTROL_LOW) & 0x7F) | 0x00110000 | tmp_dunit_control_low ); - } - - /* set SDRAM mode SetCommand 0x1418*/ - GT_REG_WRITE(SDRAM_OPERATION, 0x3); - while (GTREGREAD(SDRAM_OPERATION) != 0) { - DP(printf("\n*** SDRAM_OPERATION 1418 after D_UNIT_CONTROL_LOW: Module still busy ... please wait... ***\n")); - } + tmp = (GTREGREAD (D_UNIT_CONTROL_LOW) & 0x01); /* Clock Domain Sync from power on reset */ + if (tmp != 1) { /*clocks are not sync */ + /* asyncmode */ + GT_REG_WRITE (D_UNIT_CONTROL_LOW, + (GTREGREAD (D_UNIT_CONTROL_LOW) & 0x7F) | + 0x18110780 | tmp_dunit_control_low); + } else { + /* syncmode */ + GT_REG_WRITE (D_UNIT_CONTROL_LOW, + (GTREGREAD (D_UNIT_CONTROL_LOW) & 0x7F) | + 0x00110000 | tmp_dunit_control_low); + } + + /* set SDRAM mode SetCommand 0x1418 */ + GT_REG_WRITE (SDRAM_OPERATION, 0x3); + while (GTREGREAD (SDRAM_OPERATION) != 0) { + DP (printf + ("\n*** SDRAM_OPERATION 1418 after D_UNIT_CONTROL_LOW: Module still busy ... please wait... ***\n")); + } /*------------------------------------------------------------------------------ */ @@ -1196,93 +1420,134 @@ setup_sdram(AUX_MEM_DIMM_INFO *info) tmp = 0x02; - DP(printf("drb_size (n*64Mbit): %d\n", info->drb_size)); + DP (printf ("drb_size (n*64Mbit): %d\n", info->drb_size)); switch (info->drb_size) { - case 1: /* 64 Mbit */ - case 2: /* 128 Mbit */ - DP(printf("RAM-Device_size 64Mbit or 128Mbit)\n")); + case 1: /* 64 Mbit */ + case 2: /* 128 Mbit */ + DP (printf ("RAM-Device_size 64Mbit or 128Mbit)\n")); tmp |= (0x00 << 4); break; - case 4: /* 256 Mbit */ - case 8: /* 512 Mbit */ - DP(printf("RAM-Device_size 256Mbit or 512Mbit)\n")); + case 4: /* 256 Mbit */ + case 8: /* 512 Mbit */ + DP (printf ("RAM-Device_size 256Mbit or 512Mbit)\n")); tmp |= (0x01 << 4); break; - case 16: /* 1 Gbit */ - case 32: /* 2 Gbit */ - DP(printf("RAM-Device_size 1Gbit or 2Gbit)\n")); + case 16: /* 1 Gbit */ + case 32: /* 2 Gbit */ + DP (printf ("RAM-Device_size 1Gbit or 2Gbit)\n")); tmp |= (0x02 << 4); break; default: - printf("Error in dram size calculation\n"); - DP(printf("Assume: RAM-Device_size 1Gbit or 2Gbit)\n")); + printf ("Error in dram size calculation\n"); + DP (printf ("Assume: RAM-Device_size 1Gbit or 2Gbit)\n")); tmp |= (0x02 << 4); return 1; } /* SDRAM bank parameters */ /* the param registers for slot 1 (banks 2+3) are offset by 0x8 */ - DP(printf("setting up slot %d config with: %08lx \n", info->slot, tmp)); - GT_REG_WRITE(SDRAM_ADDR_CONTROL, tmp); + DP (printf + ("setting up slot %d config with: %08lx \n", info->slot, tmp)); + GT_REG_WRITE (SDRAM_ADDR_CONTROL, tmp); /* ------------------------------------------------------------------------------ */ - DP(printf("setting up sdram_timing_control_low with: %08x \n", 0x11511220)); - GT_REG_WRITE(SDRAM_TIMING_CONTROL_LOW, 0x11511220); + DP (printf + ("setting up sdram_timing_control_low with: %08x \n", + 0x11511220)); + GT_REG_WRITE (SDRAM_TIMING_CONTROL_LOW, 0x11511220); /* ------------------------------------------------------------------------------ */ /* SDRAM configuration */ - tmp = GTREGREAD(SDRAM_CONFIG); - - if (info->registeredAddrAndControlInputs || info->registeredDQMBinputs) { - tmp |= (1 << 17); - DP(printf("SPD says: registered Addr. and Cont.: %d; registered DQMBinputs: %d\n",info->registeredAddrAndControlInputs, info->registeredDQMBinputs)); + tmp = GTREGREAD (SDRAM_CONFIG); + + if (info->registeredAddrAndControlInputs + || info->registeredDQMBinputs) { + tmp |= (1 << 17); + DP (printf + ("SPD says: registered Addr. and Cont.: %d; registered DQMBinputs: %d\n", + info->registeredAddrAndControlInputs, + info->registeredDQMBinputs)); } /* Use buffer 1 to return read data to the CPU * Page 426 MV64360 */ tmp |= (1 << 26); - DP(printf("Before Buffer assignment - sdram_conf: %08x\n", GTREGREAD(SDRAM_CONFIG))); - DP(printf("After Buffer assignment - sdram_conf: %08x\n", GTREGREAD(SDRAM_CONFIG))); + DP (printf + ("Before Buffer assignment - sdram_conf: %08x\n", + GTREGREAD (SDRAM_CONFIG))); + DP (printf + ("After Buffer assignment - sdram_conf: %08x\n", + GTREGREAD (SDRAM_CONFIG))); - /* SDRAM timing To_do:*/ + /* SDRAM timing To_do: */ - tmp = GTREGREAD(SDRAM_TIMING_CONTROL_HIGH); - DP(printf("# sdram_timing_control_high is : %08lx \n", tmp)); + tmp = GTREGREAD (SDRAM_TIMING_CONTROL_HIGH); + DP (printf ("# sdram_timing_control_high is : %08lx \n", tmp)); /* SDRAM address decode register */ /* program this with the default value */ - tmp = GTREGREAD(SDRAM_ADDR_CONTROL); - DP(printf("SDRAM address control (before: decode): %08x ", GTREGREAD(SDRAM_ADDR_CONTROL))); - GT_REG_WRITE(SDRAM_ADDR_CONTROL, (tmp | 0x2)); - DP(printf("SDRAM address control (after: decode): %08x\n", GTREGREAD(SDRAM_ADDR_CONTROL))); + tmp = GTREGREAD (SDRAM_ADDR_CONTROL); + DP (printf + ("SDRAM address control (before: decode): %08x ", + GTREGREAD (SDRAM_ADDR_CONTROL))); + GT_REG_WRITE (SDRAM_ADDR_CONTROL, (tmp | 0x2)); + DP (printf + ("SDRAM address control (after: decode): %08x\n", + GTREGREAD (SDRAM_ADDR_CONTROL))); /* set the SDRAM configuration for each bank */ /* for (i = info->slot * 2; i < ((info->slot * 2) + info->banks); i++) */ { + int l, l1; + i = info->slot; - DP(printf("\n*** Running a MRS cycle for bank %d ***\n", i)); + DP (printf + ("\n*** Running a MRS cycle for bank %d ***\n", i)); /* map the bank */ - memory_map_bank(i, 0, GB/4); -#if 1 /* test only */ - /* set SDRAM mode */ /* To_do check it*/ - GT_REG_WRITE(SDRAM_OPERATION, 0x3); - check = GTREGREAD(SDRAM_OPERATION); - DP(printf("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n", check)); + memory_map_bank (i, 0, GB / 4); +#if 1 /* test only */ + + tmp = GTREGREAD (SDRAM_MODE); + GT_REG_WRITE (EXTENDED_DRAM_MODE, 0x0); + GT_REG_WRITE (SDRAM_OPERATION, 0x4); + while (GTREGREAD (SDRAM_OPERATION) != 0) { + DP (printf + ("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n")); + } + GT_REG_WRITE (SDRAM_MODE, tmp | 0x80); + GT_REG_WRITE (SDRAM_OPERATION, 0x3); + while (GTREGREAD (SDRAM_OPERATION) != 0) { + DP (printf + ("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n")); + } + l1 = 0; + for (l=0;l<200;l++) + l1 += GTREGREAD (SDRAM_OPERATION); + + GT_REG_WRITE (SDRAM_MODE, tmp); + GT_REG_WRITE (SDRAM_OPERATION, 0x3); + while (GTREGREAD (SDRAM_OPERATION) != 0) { + DP (printf + ("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n")); + } /* switch back to normal operation mode */ - GT_REG_WRITE(SDRAM_OPERATION, 0); - check = GTREGREAD(SDRAM_OPERATION); - DP(printf("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n", check)); + GT_REG_WRITE (SDRAM_OPERATION, 0x5); + while (GTREGREAD (SDRAM_OPERATION) != 0) { + DP (printf + ("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n")); + } + #endif /* test only */ /* unmap the bank */ - memory_map_bank(i, 0, 0); + memory_map_bank (i, 0, 0); } return 0; @@ -1324,7 +1589,7 @@ dram_size(long int *base, long int maxsize) *b=save2; if (val != cnt) { - DP(printf("Found %08x at Address %08x (failure)\n", (unsigned int)val, (unsigned int) addr)); + DP(printf("Found %08x at Address %08x (failure)\n", (unsigned int)val, (unsigned int) addr)); /* fix boundary condition.. STARTVAL means zero */ if(cnt==STARTVAL/sizeof(long)) cnt=0; return (cnt * sizeof(long)); @@ -1337,12 +1602,12 @@ dram_size(long int *base, long int maxsize) /* ppcboot interface function to SDRAM init - this is where all the * controlling logic happens */ -long int +phys_size_t initdram(int board_type) { int s0 = 0, s1 = 0; int checkbank[4] = { [0 ... 3] = 0 }; - ulong bank_no, realsize, total, check; + ulong bank_no, realsize, total, check; AUX_MEM_DIMM_INFO dimmInfo1; AUX_MEM_DIMM_INFO dimmInfo2; int nhr; @@ -1407,33 +1672,31 @@ initdram(int board_type) } /* Setup Ethernet DMA Adress window to DRAM Area */ - return(total); + return(total); } /* *************************************************************************************** -! * SDRAM INIT * -! * This procedure detect all Sdram types: 64, 128, 256, 512 Mbit, 1Gbit and 2Gb * -! * This procedure fits only the Atlantis * -! * * +! * SDRAM INIT * +! * This procedure detect all Sdram types: 64, 128, 256, 512 Mbit, 1Gbit and 2Gb * +! * This procedure fits only the Atlantis * +! * * ! *************************************************************************************** */ /* *************************************************************************************** -! * DFCDL initialize MV643xx Design Considerations * -! * * +! * DFCDL initialize MV643xx Design Considerations * +! * * ! *************************************************************************************** */ -int -set_dfcdlInit(void) +int set_dfcdlInit (void) { - int i; - unsigned int dfcdl_word = 0x0000014f; - for (i=0 ; i < 64; i++) - { - GT_REG_WRITE(SRAM_DATA0, dfcdl_word); - } - GT_REG_WRITE(DFCDL_CONFIG0, 0x00300000); /* enable dynamic delay line updating */ + int i; + unsigned int dfcdl_word = 0x0000014f; + for (i = 0; i < 64; i++) { + GT_REG_WRITE (SRAM_DATA0, dfcdl_word); + } + GT_REG_WRITE (DFCDL_CONFIG0, 0x00300000); /* enable dynamic delay line updating */ - return (0); -} + return (0); +}