X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=board%2Fesd%2Fpf5200%2Fpf5200.c;h=4e64e83bf65d752641f19fd10efaf908ccd1472b;hb=859500a2be94bfa77a845b9c8a4c499587035fd5;hp=c4c0221d02f6363e9da440ec47ac9451460d9a52;hpb=53c987f51391c1a221b0468aa0f37a3a6ce9181a;p=u-boot

diff --git a/board/esd/pf5200/pf5200.c b/board/esd/pf5200/pf5200.c
index c4c0221d02..4e64e83bf6 100644
--- a/board/esd/pf5200/pf5200.c
+++ b/board/esd/pf5200/pf5200.c
@@ -81,7 +81,7 @@ static void sdram_start(int hi_addr)
 
 /*
  * ATTENTION: Although partially referenced initdram does NOT make real use
- *            use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ *            use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
  *            is something else than 0x00000000.
  */
 
@@ -106,9 +106,9 @@ phys_size_t initdram(int board_type)
 
 	/* find RAM size using SDRAM CS0 only */
 	sdram_start(0);
-	test1 = get_ram_size((long *) CFG_SDRAM_BASE, 0x80000000);
+	test1 = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	sdram_start(1);
-	test2 = get_ram_size((long *) CFG_SDRAM_BASE, 0x80000000);
+	test2 = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, 0x80000000);
 
 	if (test1 > test2) {
 		sdram_start(0);
@@ -144,9 +144,9 @@ phys_size_t initdram(int board_type)
 #if 0
 	/* find RAM size using SDRAM CS1 only */
 	sdram_start(0);
-	get_ram_size((ulong *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
+	get_ram_size((ulong *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	sdram_start(1);
-	get_ram_size((ulong *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
+	get_ram_size((ulong *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	sdram_start(0);
 #endif
 	/* set SDRAM CS1 size according to the amount of RAM found */
@@ -180,10 +180,10 @@ void flash_afterinit(ulong size)
 		/* adjust mapping */
 		*(vu_long *) MPC5XXX_BOOTCS_START =
 		    *(vu_long *) MPC5XXX_CS0_START =
-		    START_REG(CFG_BOOTCS_START | size);
+		    START_REG(CONFIG_SYS_BOOTCS_START | size);
 		*(vu_long *) MPC5XXX_BOOTCS_STOP =
 		    *(vu_long *) MPC5XXX_CS0_STOP =
-		    STOP_REG(CFG_BOOTCS_START | size, size);
+		    STOP_REG(CONFIG_SYS_BOOTCS_START | size, size);
 	}
 }
 
@@ -258,10 +258,10 @@ void init_power_switch(void)
 		*(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT |= GPIO_USB0;
 		__asm__ volatile ("sync");
 	}
-	*(vu_char *) CFG_CS1_START = 0x02;	/* Red Power LED on */
+	*(vu_char *) CONFIG_SYS_CS1_START = 0x02;	/* Red Power LED on */
 	__asm__ volatile ("sync");
 
-	*(vu_char *) (CFG_CS1_START + 1) = 0x02;	/* Disable driver for KB11 */
+	*(vu_char *) (CONFIG_SYS_CS1_START + 1) = 0x02;	/* Disable driver for KB11 */
 	__asm__ volatile ("sync");
 }
 
@@ -294,7 +294,7 @@ int do_poweroff(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	return (0);
 }
 
-U_BOOT_CMD(poweroff, 1, 1, do_poweroff, "poweroff- Switch off power\n", NULL);
+U_BOOT_CMD(poweroff, 1, 1, do_poweroff, "Switch off power", "");
 
 int phypower(int flag)
 {
@@ -338,7 +338,7 @@ int do_phypower(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 }
 
 U_BOOT_CMD(phypower, 2, 2, do_phypower,
-	   "phypower- Switch power of ethernet phy\n", NULL);
+	   "Switch power of ethernet phy", "");
 
 int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
@@ -369,5 +369,7 @@ int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 }
 
 U_BOOT_CMD(writepci, 3, 1, do_writepci,
-	   "writepci- Write some data to pcibus\n",
-	   "<addr> <size>\n" "        - Write some data to pcibus.\n");
+	"Write some data to pcibus",
+	"<addr> <size>\n"
+	""
+);