X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=board%2Ffreescale%2Fb4860qds%2Feth_b4860qds.c;h=12df9a8d9f9fb4e10aab67cf8fe5e5a68ec824ce;hb=b0615f0bd22abc575824a0e20d1192913b77e282;hp=3bcda6d13afccf3849c73d5c466eb898d1c1cbe7;hpb=a19b0dd62d7b8efc658fa1aa685ff5665878f3ee;p=u-boot

diff --git a/board/freescale/b4860qds/eth_b4860qds.c b/board/freescale/b4860qds/eth_b4860qds.c
index 3bcda6d13a..12df9a8d9f 100644
--- a/board/freescale/b4860qds/eth_b4860qds.c
+++ b/board/freescale/b4860qds/eth_b4860qds.c
@@ -2,23 +2,7 @@
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Author: Sandeep Kumar Singh <sandeep@freescale.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /* This file is based on board/freescale/corenet_ds/eth_superhydra.c */
@@ -82,6 +66,7 @@ static void initialize_lane_to_slot(void)
 			serdes2_prtcl);
 
 	switch (serdes2_prtcl) {
+	case 0x17:
 	case 0x18:
 		/*
 		 * Configuration:
@@ -166,6 +151,8 @@ int board_eth_init(bd_t *bis)
 	struct memac_mdio_info tg_memac_mdio_info;
 	unsigned int i;
 	unsigned int  serdes1_prtcl, serdes2_prtcl;
+	int qsgmii;
+	struct mii_dev *bus;
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	serdes1_prtcl = in_be32(&gur->rcwsr[4]) &
 		FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
@@ -212,19 +199,19 @@ int board_eth_init(bd_t *bis)
 	fm_info_set_phy_address(FM1_DTSEC6, CONFIG_SYS_FM1_DTSEC6_PHY_ADDR);
 
 	switch (serdes1_prtcl) {
+	case 0x29:
 	case 0x2a:
 		/* Serdes 1: A-B SGMII, Configuring DTSEC 5 and 6 */
 		debug("Setting phy addresses for FM1_DTSEC5: %x and"
 			"FM1_DTSEC6: %x\n", CONFIG_SYS_FM1_DTSEC5_PHY_ADDR,
 			CONFIG_SYS_FM1_DTSEC6_PHY_ADDR);
-		/* Fixing Serdes clock by programming FPGA register */
-		QIXIS_WRITE(brdcfg[4], QIXIS_SRDS1CLK_125);
 		fm_info_set_phy_address(FM1_DTSEC5,
 				CONFIG_SYS_FM1_DTSEC5_PHY_ADDR);
 		fm_info_set_phy_address(FM1_DTSEC6,
 				CONFIG_SYS_FM1_DTSEC6_PHY_ADDR);
 		break;
 #ifdef CONFIG_PPC_B4420
+	case 0x17:
 	case 0x18:
 		/* Serdes 1: A-D SGMII, Configuring on board dual SGMII Phy */
 		debug("Setting phy addresses for FM1_DTSEC3: %x and"
@@ -244,6 +231,7 @@ int board_eth_init(bd_t *bis)
 		break;
 	}
 	switch (serdes2_prtcl) {
+	case 0x17:
 	case 0x18:
 		debug("Setting phy addresses on SGMII Riser card for"
 				"FM1_DTSEC ports: \n");
@@ -256,6 +244,7 @@ int board_eth_init(bd_t *bis)
 		fm_info_set_phy_address(FM1_DTSEC4,
 				CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR);
 		break;
+	case 0x48:
 	case 0x49:
 		debug("Setting phy addresses on SGMII Riser card for"
 				"FM1_DTSEC ports: \n");
@@ -299,6 +288,22 @@ int board_eth_init(bd_t *bis)
 		break;
 	}
 
+	/*set PHY address for QSGMII Riser Card on slot2*/
+	bus = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
+	qsgmii = is_qsgmii_riser_card(bus, PHY_BASE_ADDR, PORT_NUM, REGNUM);
+
+	if (qsgmii) {
+		switch (serdes2_prtcl) {
+		case 0xb2:
+		case 0x8d:
+			fm_info_set_phy_address(FM1_DTSEC3, PHY_BASE_ADDR);
+			fm_info_set_phy_address(FM1_DTSEC4, PHY_BASE_ADDR + 1);
+			break;
+		default:
+			break;
+		}
+	}
+
 	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
 		int idx = i - FM1_DTSEC1;