X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=board%2Ffreescale%2Fmpc8536ds%2Fmpc8536ds.c;h=93eed59b1a95b23dda37ec20c2b06798bf9604ae;hb=9d0456822c4fec302608d4161ae9d9cfe81100b1;hp=bddc78f3b9feda6847b2464b91feb94d871ee179;hpb=feede8b07013b33fca8dd2a916b3ac86bf4d4c0a;p=u-boot diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c index bddc78f3b9..93eed59b1a 100644 --- a/board/freescale/mpc8536ds/mpc8536ds.c +++ b/board/freescale/mpc8536ds/mpc8536ds.c @@ -1,23 +1,7 @@ /* - * Copyright 2008 Freescale Semiconductor. + * Copyright 2008-2012 Freescale Semiconductor, Inc. * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #include @@ -27,49 +11,75 @@ #include #include #include -#include -#include +#include +#include #include +#include #include #include #include #include #include +#include #include #include #include -#include "../common/pixis.h" #include "../common/sgmii_riser.h" -phys_size_t fixed_sdram(void); - -int checkboard (void) +int board_early_init_f (void) { - printf ("Board: MPC8536DS, System ID: 0x%02x, " - "System Version: 0x%02x, FPGA Version: 0x%02x\n", - in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER), - in8(PIXIS_BASE + PIXIS_PVER)); +#ifdef CONFIG_MMC + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + + setbits_be32(&gur->pmuxcr, + (MPC85xx_PMUXCR_SDHC_CD | + MPC85xx_PMUXCR_SDHC_WP)); + + /* The MPC8536DS board insert the SDHC_WP pin for erratum NMG_eSDHC118, + * however, this erratum only applies to MPC8536 Rev1.0. + * So set SDHC_WP to active-low when use MPC8536 Rev1.1 and greater.*/ + if ((((SVR_MAJ(get_svr()) & 0x7) == 0x1) && + (SVR_MIN(get_svr()) >= 0x1)) + || (SVR_MAJ(get_svr() & 0x7) > 0x1)) + setbits_be32(&gur->gencfgr, MPC85xx_GENCFGR_SDHC_WP_INV); +#endif return 0; } -phys_size_t -initdram(int board_type) +int checkboard (void) { - phys_size_t dram_size = 0; - - puts("Initializing...."); - -#ifdef CONFIG_SPD_EEPROM - dram_size = fsl_ddr_sdram(); -#else - dram_size = fixed_sdram(); -#endif - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; + u8 vboot; + u8 *pixis_base = (u8 *)PIXIS_BASE; + + printf("Board: MPC8536DS Sys ID: 0x%02x, " + "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", + in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER), + in_8(pixis_base + PIXIS_PVER)); + + vboot = in_8(pixis_base + PIXIS_VBOOT); + switch ((vboot & PIXIS_VBOOT_LBMAP) >> 5) { + case PIXIS_VBOOT_LBMAP_NOR0: + puts ("vBank: 0\n"); + break; + case PIXIS_VBOOT_LBMAP_NOR1: + puts ("vBank: 1\n"); + break; + case PIXIS_VBOOT_LBMAP_NOR2: + puts ("vBank: 2\n"); + break; + case PIXIS_VBOOT_LBMAP_NOR3: + puts ("vBank: 3\n"); + break; + case PIXIS_VBOOT_LBMAP_PJET: + puts ("Promjet\n"); + break; + case PIXIS_VBOOT_LBMAP_NAND: + puts ("NAND\n"); + break; + } - puts(" DDR: "); - return dram_size; + return 0; } #if !defined(CONFIG_SPD_EEPROM) @@ -80,7 +90,7 @@ initdram(int board_type) phys_size_t fixed_sdram (void) { volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile ccsr_ddr_t *ddr= &immap->im_ddr; + struct ccsr_ddr __iomem *ddr = &immap->im_ddr; uint d_init; ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; @@ -132,295 +142,61 @@ phys_size_t fixed_sdram (void) static struct pci_controller pci1_hose; #endif -#ifdef CONFIG_PCIE1 -static struct pci_controller pcie1_hose; -#endif - -#ifdef CONFIG_PCIE2 -static struct pci_controller pcie2_hose; -#endif - -#ifdef CONFIG_PCIE3 -static struct pci_controller pcie3_hose; -#endif - -extern int fsl_pci_setup_inbound_windows(struct pci_region *r); -extern void fsl_pci_init(struct pci_controller *hose); - -int first_free_busno=0; - -void -pci_init_board(void) +#ifdef CONFIG_PCI +void pci_init_board(void) { - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - uint devdisr = gur->devdisr; - uint sdrs2_io_sel = - (gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27; - uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; - uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16; - - debug(" pci_init_board: devdisr=%x, sdrs2_io_sel=%x, io_sel=%x,\ - host_agent=%x\n", devdisr, sdrs2_io_sel, io_sel, host_agent); - - if (sdrs2_io_sel == 7) - printf(" Serdes2 disalbed\n"); - else if (sdrs2_io_sel == 4) { - printf(" eTSEC1 is in sgmii mode.\n"); - printf(" eTSEC3 is in sgmii mode.\n"); - } else if (sdrs2_io_sel == 6) - printf(" eTSEC1 is in sgmii mode.\n"); - -#ifdef CONFIG_PCIE3 -{ - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR; - struct pci_controller *hose = &pcie3_hose; - int pcie_ep = (host_agent == 1); - int pcie_configured = (io_sel == 7); - struct pci_region *r = hose->regions; - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ - printf ("\n PCIE3 connected to Slot3 as %s (base address %x)", - pcie_ep ? "End Point" : "Root Complex", - (uint)pci); - if (pci->pme_msg_det) { - pci->pme_msg_det = 0xffffffff; - debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det); - } - printf ("\n"); - - /* inbound */ - r += fsl_pci_setup_inbound_windows(r); - - /* outbound memory */ - pci_set_region(r++, - CONFIG_SYS_PCIE3_MEM_BUS, - CONFIG_SYS_PCIE3_MEM_PHYS, - CONFIG_SYS_PCIE3_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(r++, - CONFIG_SYS_PCIE3_IO_BUS, - CONFIG_SYS_PCIE3_IO_PHYS, - CONFIG_SYS_PCIE3_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = r - hose->regions; - - hose->first_busno=first_free_busno; - pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); - - fsl_pci_init(hose); - - first_free_busno=hose->last_busno+1; - printf (" PCIE3 on bus %02x - %02x\n", - hose->first_busno,hose->last_busno); - } else { - printf (" PCIE3: disabled\n"); - } - - } -#else - gur->devdisr |= MPC85xx_DEVDISR_PCIE3; /* disable */ -#endif - -#ifdef CONFIG_PCIE1 - { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; - struct pci_controller *hose = &pcie1_hose; - int pcie_ep = (host_agent == 5); - int pcie_configured = (io_sel == 2 || io_sel == 3 - || io_sel == 5 || io_sel == 7); - struct pci_region *r = hose->regions; - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ - printf ("\n PCIE1 connected to Slot1 as %s (base address %x)", - pcie_ep ? "End Point" : "Root Complex", - (uint)pci); - if (pci->pme_msg_det) { - pci->pme_msg_det = 0xffffffff; - debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det); - } - printf ("\n"); - - /* inbound */ - r += fsl_pci_setup_inbound_windows(r); - - /* outbound memory */ - pci_set_region(r++, - CONFIG_SYS_PCIE1_MEM_BUS, - CONFIG_SYS_PCIE1_MEM_PHYS, - CONFIG_SYS_PCIE1_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(r++, - CONFIG_SYS_PCIE1_IO_BUS, - CONFIG_SYS_PCIE1_IO_PHYS, - CONFIG_SYS_PCIE1_IO_SIZE, - PCI_REGION_IO); - -#ifdef CONFIG_SYS_PCIE1_MEM_BUS2 - /* outbound memory */ - pci_set_region(r++, - CONFIG_SYS_PCIE1_MEM_BUS2, - CONFIG_SYS_PCIE1_MEM_PHYS2, - CONFIG_SYS_PCIE1_MEM_SIZE2, - PCI_REGION_MEM); -#endif - hose->region_count = r - hose->regions; - hose->first_busno=first_free_busno; - - pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); - - fsl_pci_init(hose); - - first_free_busno=hose->last_busno+1; - printf(" PCIE1 on bus %02x - %02x\n", - hose->first_busno,hose->last_busno); - - } else { - printf (" PCIE1: disabled\n"); - } - - } -#else - gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */ -#endif - -#ifdef CONFIG_PCIE2 - { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR; - struct pci_controller *hose = &pcie2_hose; - int pcie_ep = (host_agent == 3); - int pcie_configured = (io_sel == 5 || io_sel == 7); - struct pci_region *r = hose->regions; - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ - printf ("\n PCIE2 connected to Slot 2 as %s (base address %x)", - pcie_ep ? "End Point" : "Root Complex", - (uint)pci); - if (pci->pme_msg_det) { - pci->pme_msg_det = 0xffffffff; - debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det); - } - printf ("\n"); - - /* inbound */ - r += fsl_pci_setup_inbound_windows(r); - - /* outbound memory */ - pci_set_region(r++, - CONFIG_SYS_PCIE2_MEM_BUS, - CONFIG_SYS_PCIE2_MEM_PHYS, - CONFIG_SYS_PCIE2_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(r++, - CONFIG_SYS_PCIE2_IO_BUS, - CONFIG_SYS_PCIE2_IO_PHYS, - CONFIG_SYS_PCIE2_IO_SIZE, - PCI_REGION_IO); - -#ifdef CONFIG_SYS_PCIE2_MEM_BUS2 - /* outbound memory */ - pci_set_region(r++, - CONFIG_SYS_PCIE2_MEM_BUS2, - CONFIG_SYS_PCIE2_MEM_PHYS2, - CONFIG_SYS_PCIE2_MEM_SIZE2, - PCI_REGION_MEM); -#endif - hose->region_count = r - hose->regions; - hose->first_busno=first_free_busno; - pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); - - fsl_pci_init(hose); - first_free_busno=hose->last_busno+1; - printf (" PCIE2 on bus %02x - %02x\n", - hose->first_busno,hose->last_busno); - - } else { - printf (" PCIE2: disabled\n"); - } - - } -#else - gur->devdisr |= MPC85xx_DEVDISR_PCIE2; /* disable */ -#endif + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + struct fsl_pci_info pci_info; + u32 devdisr, pordevsr; + u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel; + int first_free_busno; + first_free_busno = fsl_pcie_init_board(0); #ifdef CONFIG_PCI1 -{ - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR; - struct pci_controller *hose = &pci1_hose; - struct pci_region *r = hose->regions; - - uint pci_agent = (host_agent == 6); - uint pci_speed = 66666000; /*get_clock_freq (); PCI PSPEED in [4:5] */ - uint pci_32 = 1; - uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; /* PORDEVSR[14] */ - uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; /* PORPLLSR[16] */ + devdisr = in_be32(&gur->devdisr); + pordevsr = in_be32(&gur->pordevsr); + porpllsr = in_be32(&gur->porpllsr); + pci_speed = 66666000; + pci_32 = 1; + pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; + pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { - printf ("\n PCI: %d bit, %s MHz, %s, %s, %s (base address %x)\n", + SET_STD_PCI_INFO(pci_info, 1); + set_next_law(pci_info.mem_phys, + law_size_bits(pci_info.mem_size), pci_info.law); + set_next_law(pci_info.io_phys, + law_size_bits(pci_info.io_size), pci_info.law); + + pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs); + printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n", (pci_32) ? 32 : 64, (pci_speed == 33333000) ? "33" : (pci_speed == 66666000) ? "66" : "unknown", pci_clk_sel ? "sync" : "async", pci_agent ? "agent" : "host", pci_arb ? "arbiter" : "external-arbiter", - (uint)pci - ); - - /* inbound */ - r += fsl_pci_setup_inbound_windows(r); - - /* outbound memory */ - pci_set_region(r++, - CONFIG_SYS_PCI1_MEM_BUS, - CONFIG_SYS_PCI1_MEM_PHYS, - CONFIG_SYS_PCI1_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(r++, - CONFIG_SYS_PCI1_IO_BUS, - CONFIG_SYS_PCI1_IO_PHYS, - CONFIG_SYS_PCI1_IO_SIZE, - PCI_REGION_IO); - -#ifdef CONFIG_SYS_PCI1_MEM_BUS2 - /* outbound memory */ - pci_set_region(r++, - CONFIG_SYS_PCI1_MEM_BUS2, - CONFIG_SYS_PCI1_MEM_PHYS2, - CONFIG_SYS_PCI1_MEM_SIZE2, - PCI_REGION_MEM); -#endif - hose->region_count = r - hose->regions; - hose->first_busno=first_free_busno; - pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); - - fsl_pci_init(hose); - first_free_busno=hose->last_busno+1; - printf ("PCI on bus %02x - %02x\n", - hose->first_busno,hose->last_busno); + pci_info.regs); + + first_free_busno = fsl_pci_init_port(&pci_info, + &pci1_hose, first_free_busno); } else { - printf (" PCI: disabled\n"); + printf("PCI: disabled\n"); } -} + + puts("\n"); #else - gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */ + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */ #endif } - +#endif int board_early_init_r(void) { const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - const u8 flash_esel = 1; + int flash_esel = find_tlb_idx((void *)flashbase, 1); /* * Remap Boot flash + PROMJET region to caching-inhibited @@ -431,8 +207,14 @@ int board_early_init_r(void) flush_dcache(); invalidate_icache(); - /* invalidate existing TLB entry for flash + promjet */ - disable_tlb(flash_esel); + if (flash_esel == -1) { + /* very unlikely unless something is messed up */ + puts("Error: Could not find TLB for FLASH BASE\n"); + flash_esel = 1; /* give our best effort to continue */ + } else { + /* invalidate existing TLB entry for flash + promjet */ + disable_tlb(flash_esel); + } set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */ @@ -441,171 +223,17 @@ int board_early_init_r(void) return 0; } -#ifdef CONFIG_GET_CLK_FROM_ICS307 -/* decode S[0-2] to Output Divider (OD) */ -static unsigned char -ics307_S_to_OD[] = { - 10, 2, 8, 4, 5, 7, 3, 6 -}; - -/* Calculate frequency being generated by ICS307-02 clock chip based upon - * the control bytes being programmed into it. */ -/* XXX: This function should probably go into a common library */ -static unsigned long -ics307_clk_freq (unsigned char cw0, unsigned char cw1, unsigned char cw2) -{ - const unsigned long long InputFrequency = CONFIG_ICS307_REFCLK_HZ; - unsigned long VDW = ((cw1 << 1) & 0x1FE) + ((cw2 >> 7) & 1); - unsigned long RDW = cw2 & 0x7F; - unsigned long OD = ics307_S_to_OD[cw0 & 0x7]; - unsigned long freq; - - /* CLK1Frequency = InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD) */ - - /* cw0: C1 C0 TTL F1 F0 S2 S1 S0 - * cw1: V8 V7 V6 V5 V4 V3 V2 V1 - * cw2: V0 R6 R5 R4 R3 R2 R1 R0 - * - * R6:R0 = Reference Divider Word (RDW) - * V8:V0 = VCO Divider Word (VDW) - * S2:S0 = Output Divider Select (OD) - * F1:F0 = Function of CLK2 Output - * TTL = duty cycle - * C1:C0 = internal load capacitance for cyrstal - */ - - /* Adding 1 to get a "nicely" rounded number, but this needs - * more tweaking to get a "properly" rounded number. */ - - freq = 1 + (InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD)); - - debug("ICS307: CW[0-2]: %02X %02X %02X => %u Hz\n", cw0, cw1, cw2, - freq); - return freq; -} - -unsigned long -get_board_sys_clk(ulong dummy) -{ - return ics307_clk_freq ( - in8(PIXIS_BASE + PIXIS_VSYSCLK0), - in8(PIXIS_BASE + PIXIS_VSYSCLK1), - in8(PIXIS_BASE + PIXIS_VSYSCLK2) - ); -} - -unsigned long -get_board_ddr_clk(ulong dummy) -{ - return ics307_clk_freq ( - in8(PIXIS_BASE + PIXIS_VDDRCLK0), - in8(PIXIS_BASE + PIXIS_VDDRCLK1), - in8(PIXIS_BASE + PIXIS_VDDRCLK2) - ); -} -#else -unsigned long -get_board_sys_clk(ulong dummy) -{ - u8 i; - ulong val = 0; - - i = in8(PIXIS_BASE + PIXIS_SPD); - i &= 0x07; - - switch (i) { - case 0: - val = 33333333; - break; - case 1: - val = 40000000; - break; - case 2: - val = 50000000; - break; - case 3: - val = 66666666; - break; - case 4: - val = 83333333; - break; - case 5: - val = 100000000; - break; - case 6: - val = 133333333; - break; - case 7: - val = 166666666; - break; - } - - return val; -} - -unsigned long -get_board_ddr_clk(ulong dummy) -{ - u8 i; - ulong val = 0; - - i = in8(PIXIS_BASE + PIXIS_SPD); - i &= 0x38; - i >>= 3; - - switch (i) { - case 0: - val = 33333333; - break; - case 1: - val = 40000000; - break; - case 2: - val = 50000000; - break; - case 3: - val = 66666666; - break; - case 4: - val = 83333333; - break; - case 5: - val = 100000000; - break; - case 6: - val = 133333333; - break; - case 7: - val = 166666666; - break; - } - return val; -} -#endif - -int sata_initialize(void) -{ - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - uint sdrs2_io_sel = - (gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27; - if (sdrs2_io_sel & 0x04) - return 1; - - return __sata_initialize(); -} - int board_eth_init(bd_t *bis) { #ifdef CONFIG_TSEC_ENET + struct fsl_pq_mdio_info mdio_info; struct tsec_info_struct tsec_info[2]; - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); int num = 0; - uint sdrs2_io_sel = - (gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27; #ifdef CONFIG_TSEC1 SET_STD_TSEC_INFO(tsec_info[num], 1); - if ((sdrs2_io_sel == 4) || (sdrs2_io_sel == 6)) { + if (is_serdes_configured(SGMII_TSEC1)) { + puts("eTSEC1 is in sgmii mode.\n"); tsec_info[num].phyaddr = 0; tsec_info[num].flags |= TSEC_SGMII; } @@ -613,7 +241,8 @@ int board_eth_init(bd_t *bis) #endif #ifdef CONFIG_TSEC3 SET_STD_TSEC_INFO(tsec_info[num], 3); - if (sdrs2_io_sel == 4) { + if (is_serdes_configured(SGMII_TSEC3)) { + puts("eTSEC3 is in sgmii mode.\n"); tsec_info[num].phyaddr = 1; tsec_info[num].flags |= TSEC_SGMII; } @@ -626,37 +255,35 @@ int board_eth_init(bd_t *bis) } #ifdef CONFIG_FSL_SGMII_RISER - if ((sdrs2_io_sel == 4) || (sdrs2_io_sel == 6)) + if (is_serdes_configured(SGMII_TSEC1) || + is_serdes_configured(SGMII_TSEC3)) { fsl_sgmii_riser_init(tsec_info, num); + } #endif + mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; + mdio_info.name = DEFAULT_MII_NAME; + fsl_pq_mdio_init(bis, &mdio_info); + tsec_eth_init(bis, tsec_info, num); #endif return pci_eth_init(bis); } #if defined(CONFIG_OF_BOARD_SETUP) -extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, - struct pci_controller *hose); - void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI1 - ft_fsl_pci_setup(blob, "pci0", &pci1_hose); -#endif -#ifdef CONFIG_PCIE2 - ft_fsl_pci_setup(blob, "pci1", &pcie2_hose); -#endif -#ifdef CONFIG_PCIE2 - ft_fsl_pci_setup(blob, "pci2", &pcie1_hose); -#endif -#ifdef CONFIG_PCIE1 - ft_fsl_pci_setup(blob, "pci3", &pcie3_hose); -#endif + FT_FSL_PCI_SETUP; + #ifdef CONFIG_FSL_SGMII_RISER fsl_sgmii_riser_fdt_fixup(blob); #endif + +#ifdef CONFIG_HAS_FSL_MPH_USB + fdt_fixup_dr_usb(blob, bd); +#endif + } #endif