X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=board%2Ffreescale%2Fmpc8568mds%2Fbcsr.c;h=30676e1e1c143561b0a4e9878e6bcd6d1140d713;hb=5f91ef6acdbadec33e0192049e2b24a1d9692f1d;hp=aae0f98e038f83d51437bb9264e54f06718051cc;hpb=3f523edb146c3dfbc52e7631b37e6f326e0e980d;p=u-boot

diff --git a/board/freescale/mpc8568mds/bcsr.c b/board/freescale/mpc8568mds/bcsr.c
index aae0f98e03..30676e1e1c 100644
--- a/board/freescale/mpc8568mds/bcsr.c
+++ b/board/freescale/mpc8568mds/bcsr.c
@@ -21,13 +21,15 @@
  */
 
 #include <common.h>
+#include <asm/io.h>
+
 #include "bcsr.h"
 
 void enable_8568mds_duart()
 {
-	volatile uint* duart_mux	= (uint *)(CFG_CCSRBAR + 0xe0060);
-	volatile uint* devices		= (uint *)(CFG_CCSRBAR + 0xe0070);
-	volatile u8 *bcsr		= (u8 *)(CFG_BCSR);
+	volatile uint* duart_mux	= (uint *)(CONFIG_SYS_CCSRBAR + 0xe0060);
+	volatile uint* devices		= (uint *)(CONFIG_SYS_CCSRBAR + 0xe0070);
+	volatile u8 *bcsr		= (u8 *)(CONFIG_SYS_BCSR);
 
 	*duart_mux = 0x80000000;	/* Set the mux to Duart on PMUXCR */
 	*devices  = 0;			/* Enable all peripheral devices */
@@ -36,21 +38,40 @@ void enable_8568mds_duart()
 
 void enable_8568mds_flash_write()
 {
-	volatile u8 *bcsr = (u8 *)(CFG_BCSR);
+	volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR);
 
 	bcsr[9] |= 0x01;
 }
 
 void disable_8568mds_flash_write()
 {
-	volatile u8 *bcsr = (u8 *)(CFG_BCSR);
+	volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR);
 
 	bcsr[9] &= ~(0x01);
 }
 
 void enable_8568mds_qe_mdio()
 {
-	u8 *bcsr = (u8 *)(CFG_BCSR);
+	u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR);
 
 	bcsr[7] |= 0x01;
 }
+
+#if defined(CONFIG_UEC_ETH1) || defined(CONFIG_UEC_ETH2)
+void reset_8568mds_uccs(void)
+{
+	volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR);
+
+	/* Turn off UCC1 & UCC2 */
+	out_8(&bcsr[8], in_8(&bcsr[8]) & ~BCSR_UCC1_GETH_EN);
+	out_8(&bcsr[9], in_8(&bcsr[9]) & ~BCSR_UCC2_GETH_EN);
+
+	/* Mode is RGMII, all bits clear */
+	out_8(&bcsr[11], in_8(&bcsr[11]) & ~(BCSR_UCC1_MODE_MSK |
+					     BCSR_UCC2_MODE_MSK));
+
+	/* Turn UCC1 & UCC2 on */
+	out_8(&bcsr[8], in_8(&bcsr[8]) | BCSR_UCC1_GETH_EN);
+	out_8(&bcsr[9], in_8(&bcsr[9]) | BCSR_UCC2_GETH_EN);
+}
+#endif