X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=board%2Ffreescale%2Fmpc8568mds%2Fmpc8568mds.c;h=ae80697b3851bbdaf5e4c428a1c874d5eb5342ec;hb=d44a5f51288aec60c6bdb4ac939d75c24e5bf9c2;hp=f1928abf98cdcb6123358ddc66ebaeab24c883d8;hpb=776488eb88d0915945eeecfc1ad3e318979f9548;p=u-boot diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c index f1928abf98..ae80697b38 100644 --- a/board/freescale/mpc8568mds/mpc8568mds.c +++ b/board/freescale/mpc8568mds/mpc8568mds.c @@ -1,32 +1,19 @@ /* - * Copyright 2007 Freescale Semiconductor. + * Copyright 2007,2009-2011 Freescale Semiconductor, Inc. * * (C) Copyright 2002 Scott McNutt * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #include #include #include +#include #include -#include +#include +#include +#include #include #include #include @@ -97,13 +84,7 @@ const qe_iop_conf_t qe_iop_conf_tab[] = { {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ }; - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) -extern void ddr_enable_ecc(unsigned int dram_size); -#endif - void local_bus_init(void); -void sdram_init(void); int board_early_init_f (void) { @@ -121,10 +102,10 @@ int board_early_init_f (void) enable_8568mds_qe_mdio(); #endif -#ifdef CFG_I2C2_OFFSET +#ifdef CONFIG_SYS_I2C2_OFFSET /* Enable I2C2_SCL and I2C2_SDA */ volatile struct par_io *port_c; - port_c = (struct par_io*)(CFG_IMMR + 0xe0140); + port_c = (struct par_io*)(CONFIG_SYS_IMMR + 0xe0140); port_c->cpdir2 |= 0x0f000000; port_c->cppar2 &= ~0x0f000000; port_c->cppar2 |= 0x0a000000; @@ -140,62 +121,20 @@ int checkboard (void) return 0; } -long int -initdram(int board_type) -{ - long dram_size = 0; - - puts("Initializing\n"); - -#if defined(CONFIG_DDR_DLL) - { - /* - * Work around to stabilize DDR DLL MSYNC_IN. - * Errata DDR9 seems to have been fixed. - * This is now the workaround for Errata DDR11: - * Override DLL = 1, Course Adj = 1, Tap Select = 0 - */ - - volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); - - gur->ddrdllcr = 0x81000000; - asm("sync;isync;msync"); - udelay(200); - } -#endif - dram_size = spd_sdram(); - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif - /* - * SDRAM Initialization - */ - sdram_init(); - - puts(" DDR: "); - return dram_size; -} - /* * Initialize Local Bus */ void local_bus_init(void) { - volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR); + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; - uint lbc_hz; sys_info_t sysinfo; get_sys_info(&sysinfo); - clkdiv = (lbc->lcrr & 0x0f) * 2; - lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; + clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2; gur->lbiuiplldcr1 = 0x00078080; if (clkdiv == 16) { @@ -214,47 +153,43 @@ local_bus_init(void) /* * Initialize SDRAM memory on the Local Bus. */ -void -sdram_init(void) +void lbc_sdram_init(void) { -#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM) +#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) uint idx; - volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR); - uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE; + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; + uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; uint lsdmr_common; - puts(" SDRAM: "); - - print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); + puts("LBC SDRAM: "); + print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, + "\n "); /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CFG_OR2_PRELIM; - asm("msync"); - - lbc->br2 = CFG_BR2_PRELIM; + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); asm("msync"); - lbc->lbcr = CFG_LBC_LBCR; + lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync"); - - lbc->lsrt = CFG_LBC_LSRT; - lbc->mrtpr = CFG_LBC_MRTPR; + lbc->lsrt = CONFIG_SYS_LBC_LSRT; + lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; asm("msync"); /* * MPC8568 uses "new" 15-16 style addressing. */ - lsdmr_common = CFG_LBC_LSDMR_COMMON; - lsdmr_common |= CFG_LBC_LSDMR_BSMA1516; + lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON; + lsdmr_common |= LSDMR_BSMA1516; /* * Issue PRECHARGE ALL command. */ - lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL; + lbc->lsdmr = lsdmr_common | LSDMR_OP_PCHALL; asm("sync;msync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); @@ -264,7 +199,7 @@ sdram_init(void) * Issue 8 AUTO REFRESH commands. */ for (idx = 0; idx < 8; idx++) { - lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH; + lbc->lsdmr = lsdmr_common | LSDMR_OP_ARFRSH; asm("sync;msync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); @@ -274,7 +209,7 @@ sdram_init(void) /* * Issue 8 MODE-set command. */ - lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW; + lbc->lsdmr = lsdmr_common | LSDMR_OP_MRW; asm("sync;msync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); @@ -283,7 +218,7 @@ sdram_init(void) /* * Issue NORMAL OP command. */ - lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL; + lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL; asm("sync;msync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); @@ -306,19 +241,9 @@ static struct pci_config_table pci_mpc8568mds_config_table[] = { }; #endif -static struct pci_controller pci1_hose = { -#ifndef CONFIG_PCI_PNP - config_table: pci_mpc8568mds_config_table, -#endif -}; +static struct pci_controller pci1_hose; #endif /* CONFIG_PCI */ -#ifdef CONFIG_PCIE1 -static struct pci_controller pcie1_hose; -#endif /* CONFIG_PCIE1 */ - -int first_free_busno = 0; - /* * pib_init() -- Initialize the PCA9555 IO expander on the PIB board */ @@ -359,166 +284,71 @@ pib_init(void) i2c_write(0x27, 0x3, 1, &val8, 1); asm("eieio"); + i2c_set_bus_num(orig_i2c_bus); } #ifdef CONFIG_PCI -void -pci_init_board(void) +void pci_init_board(void) { - volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); - uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; - uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16; - + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + int first_free_busno = 0; #ifdef CONFIG_PCI1 -{ - pib_init(); - - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); - struct pci_controller *hose = &pci1_hose; - - uint pci_32 = 1; /* PORDEVSR[15] */ - uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; /* PORDEVSR[14] */ - uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; /* PORPLLSR[16] */ - - uint pci_agent = (host_agent == 3) || (host_agent == 4 ) || (host_agent == 6); - - uint pci_speed = 66666000; - - if (!(gur->devdisr & MPC85xx_DEVDISR_PCI1)) { - printf (" PCI: %d bit, %s MHz, %s, %s, %s\n", + struct fsl_pci_info pci_info; + u32 devdisr, pordevsr, io_sel; + u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel; + + devdisr = in_be32(&gur->devdisr); + pordevsr = in_be32(&gur->pordevsr); + porpllsr = in_be32(&gur->porpllsr); + io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; + + debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel); + + pci_speed = 66666000; + pci_32 = 1; + pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; + pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; + + if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { + SET_STD_PCI_INFO(pci_info, 1); + set_next_law(pci_info.mem_phys, + law_size_bits(pci_info.mem_size), pci_info.law); + set_next_law(pci_info.io_phys, + law_size_bits(pci_info.io_size), pci_info.law); + + pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs); + printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n", (pci_32) ? 32 : 64, (pci_speed == 33333000) ? "33" : (pci_speed == 66666000) ? "66" : "unknown", pci_clk_sel ? "sync" : "async", pci_agent ? "agent" : "host", - pci_arb ? "arbiter" : "external-arbiter" - ); - - /* inbound */ - pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); - - /* outbound memory */ - pci_set_region(hose->regions + 1, - CFG_PCI1_MEM_BASE, - CFG_PCI1_MEM_PHYS, - CFG_PCI1_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(hose->regions + 2, - CFG_PCI1_IO_BASE, - CFG_PCI1_IO_PHYS, - CFG_PCI1_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = 3; - - hose->first_busno = first_free_busno; - pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); - - fsl_pci_init(hose); - first_free_busno = hose->last_busno+1; - printf ("PCI on bus %02x - %02x\n",hose->first_busno,hose->last_busno); - } else { - printf (" PCI: disabled\n"); - } -} -#else - gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */ -#endif - -#ifdef CONFIG_PCIE1 -{ - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); - struct pci_controller *hose = &pcie1_hose; - int pcie_ep = (host_agent == 0) || (host_agent == 2 ) || (host_agent == 3); - - int pcie_configured = io_sel >= 1; - - if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){ - printf ("\n PCIE connected to slot as %s (base address %x)", - pcie_ep ? "End Point" : "Root Complex", - (uint)pci); - - if (pci->pme_msg_det) { - pci->pme_msg_det = 0xffffffff; - debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det); - } - printf ("\n"); - - /* inbound */ - pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); - - /* outbound memory */ - pci_set_region(hose->regions + 1, - CFG_PCIE1_MEM_BASE, - CFG_PCIE1_MEM_PHYS, - CFG_PCIE1_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(hose->regions + 2, - CFG_PCIE1_IO_BASE, - CFG_PCIE1_IO_PHYS, - CFG_PCIE1_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = 3; - - hose->first_busno=first_free_busno; - pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); - - fsl_pci_init(hose); - printf ("PCIE on bus %02x - %02x\n",hose->first_busno,hose->last_busno); - - first_free_busno=hose->last_busno+1; + pci_arb ? "arbiter" : "external-arbiter", + pci_info.regs); +#ifndef CONFIG_PCI_PNP + pci1_hose.config_table = pci_mpc8568mds_config_table; +#endif + first_free_busno = fsl_pci_init_port(&pci_info, + &pci1_hose, first_free_busno); } else { - printf (" PCIE: disabled\n"); + printf("PCI: disabled\n"); } -} + + puts("\n"); #else - gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */ + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */ #endif + + fsl_pcie_init_board(first_free_busno); } #endif /* CONFIG_PCI */ #if defined(CONFIG_OF_BOARD_SETUP) -void -ft_board_setup(void *blob, bd_t *bd) +void ft_board_setup(void *blob, bd_t *bd) { - int node, tmp[2]; - const char *path; - ft_cpu_setup(blob, bd); - node = fdt_path_offset(blob, "/aliases"); - tmp[0] = 0; - if (node >= 0) { -#ifdef CONFIG_PCI1 - path = fdt_getprop(blob, node, "pci0", NULL); - if (path) { - tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } -#endif -#ifdef CONFIG_PCIE1 - path = fdt_getprop(blob, node, "pci1", NULL); - if (path) { - tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } -#endif - } + FT_FSL_PCI_SETUP; } #endif