X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=board%2Ffreescale%2Fmpc8569mds%2Fmpc8569mds.c;h=122490c026ed5d1bc4151f80e4ec22b23ec3aa1e;hb=8259e9c9adc263a3e9619bd4713dfddea19509b8;hp=ecda2229902dd7b863ac23fbf4370cff05c91479;hpb=94f2bc486043365f253892342a3ab75371b1444a;p=u-boot

diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c
index ecda222990..122490c026 100644
--- a/board/freescale/mpc8569mds/mpc8569mds.c
+++ b/board/freescale/mpc8569mds/mpc8569mds.c
@@ -3,26 +3,11 @@
  *
  * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #include <common.h>
+#include <console.h>
 #include <hwconfig.h>
 #include <pci.h>
 #include <asm/processor.h>
@@ -30,7 +15,7 @@
 #include <asm/cache.h>
 #include <asm/immap_85xx.h>
 #include <asm/fsl_pci.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 #include <asm/fsl_serdes.h>
 #include <asm/io.h>
 #include <spd_sdram.h>
@@ -39,6 +24,7 @@
 #include <libfdt.h>
 #include <fdt_support.h>
 #include <fsl_esdhc.h>
+#include <phy.h>
 
 #include "bcsr.h"
 #if defined(CONFIG_PQ_MDS_PIB)
@@ -246,7 +232,8 @@ int checkboard (void)
 #if !defined(CONFIG_SPD_EEPROM)
 phys_size_t fixed_sdram(void)
 {
-	volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+	struct ccsr_ddr __iomem *ddr =
+		(struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR;
 	uint d_init;
 
 	out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS);
@@ -302,12 +289,10 @@ local_bus_init(void)
 	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
 	uint clkdiv;
-	uint lbc_hz;
 	sys_info_t sysinfo;
 
 	get_sys_info(&sysinfo);
 	clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
-	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	out_be32(&gur->lbiuiplldcr1, 0x00078080);
 	if (clkdiv == 16)
@@ -530,7 +515,7 @@ void pci_init_board(void)
 #endif /* CONFIG_PCI */
 
 #if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
 {
 #if defined(CONFIG_SYS_UCC_RMII_MODE)
 	int nodeoff, off, err;
@@ -550,7 +535,8 @@ void ft_board_setup(void *blob, bd_t *bd)
 			break;
 		}
 
-		err = fdt_fixup_phy_connection(blob, nodeoff, RMII);
+		err = fdt_fixup_phy_connection(blob, nodeoff,
+				PHY_INTERFACE_MODE_RMII);
 
 		if (err < 0) {
 			printf("WARNING: could not set phy-connection-type "
@@ -594,5 +580,7 @@ void ft_board_setup(void *blob, bd_t *bd)
 	fdt_board_fixup_esdhc(blob, bd);
 	fdt_board_fixup_qe_uart(blob, bd);
 	fdt_board_fixup_qe_usb(blob, bd);
+
+	return 0;
 }
 #endif