X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=board%2Fmpl%2Fmip405%2Fmip405.c;h=9e8f9bbdd41ab95434d695e511609e869be8c64b;hb=53677ef18e25c97ac613349087c5cb33ae5a2741;hp=70eb5f4dca36c42971e020d40c2848e307c5821f;hpb=7205e4075d8b50e4dd89fe39ed03860b23cbb704;p=u-boot diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c index 70eb5f4dca..9e8f9bbdd4 100644 --- a/board/mpl/mip405/mip405.c +++ b/board/mpl/mip405/mip405.c @@ -65,13 +65,13 @@ #include #include "mip405.h" #include -#include <405gp_i2c.h> +#include <4xx_i2c.h> #include #include "../common/common_util.h" #include #include -extern block_dev_desc_t * scsi_get_dev(int dev); -extern block_dev_desc_t * ide_get_dev(int dev); + +DECLARE_GLOBAL_DATA_PTR; #undef SDRAM_DEBUG #define ENABLE_ECC /* for ecc boards */ @@ -89,12 +89,12 @@ extern ldiv_t ldiv (long int __numer, long int __denom); #endif -#define PLD_PART_REG PER_PLD_ADDR + 0 -#define PLD_VERS_REG PER_PLD_ADDR + 1 -#define PLD_BOARD_CFG_REG PER_PLD_ADDR + 2 -#define PLD_IRQ_REG PER_PLD_ADDR + 3 -#define PLD_COM_MODE_REG PER_PLD_ADDR + 4 -#define PLD_EXT_CONF_REG PER_PLD_ADDR + 5 +#define PLD_PART_REG PER_PLD_ADDR + 0 +#define PLD_VERS_REG PER_PLD_ADDR + 1 +#define PLD_BOARD_CFG_REG PER_PLD_ADDR + 2 +#define PLD_IRQ_REG PER_PLD_ADDR + 3 +#define PLD_COM_MODE_REG PER_PLD_ADDR + 4 +#define PLD_EXT_CONF_REG PER_PLD_ADDR + 5 #define MEGA_BYTE (1024*1024) @@ -167,6 +167,15 @@ const sdram_t sdram_table[] = { 3, /* Address Mode = 3 */ 5, /* size value */ 1}, /* ECC enabled */ + { 0x2f, /* Rev C, 128MByte -3 Board */ + 3, /* Case Latenty = 3 */ + 3, /* trp 20ns / 7.5 ns datain[27] */ + 3, /* trcd 20ns /7.5 ns (datain[29]) */ + 6, /* tras 44ns /7.5 ns (datain[30]) */ + 4, /* tcpt 44 - 20ns = 24ns */ + 3, /* Address Mode = 3 */ + 5, /* size value */ + 1}, /* ECC enabled */ { 0xff, /* terminator */ 0xff, 0xff, @@ -180,8 +189,6 @@ const sdram_t sdram_table[] = { void SDRAM_err (const char *s) { #ifndef SDRAM_DEBUG - DECLARE_GLOBAL_DATA_PTR; - (void) get_clocks (); gd->baudrate = 9600; serial_init (); @@ -232,8 +239,6 @@ void write_4hex (unsigned long val) int init_sdram (void) { - DECLARE_GLOBAL_DATA_PTR; - unsigned long tmp, baseaddr; unsigned short i; unsigned char trp_clocks, @@ -460,7 +465,7 @@ int init_sdram (void) return (0); } -int board_pre_init (void) +int board_early_init_f (void) { init_sdram (); @@ -550,7 +555,8 @@ void get_pcbrev_var(unsigned char *pcbrev, unsigned char *var) tmp >>= 1; } rc++; - if((((bc>>4) & 0xf)==0x1) /* Rev B PCB with */ + if(( (((bc>>4) & 0xf)==0x2) /* Rev C PCB or */ + || (((bc>>4) & 0xf)==0x1)) /* Rev B PCB with */ && (rc==0x1)) /* Population Option 1 is a -3 */ rc=3; *pcbrev=(bc >> 4) & 0xf; @@ -575,15 +581,15 @@ void get_pcbrev_var(unsigned char *pcbrev, unsigned char *var) int checkboard (void) { - unsigned char s[50]; + char s[50]; unsigned char bc, var; int i; backup_t *b = (backup_t *) s; puts ("Board: "); get_pcbrev_var(&bc,&var); - i = getenv_r ("serial#", s, 32); - if ((i == 0) || strncmp (s, BOARD_NAME,sizeof(BOARD_NAME))) { + i = getenv_r ("serial#", (char *)s, 32); + if ((i == 0) || strncmp ((char *)s, BOARD_NAME,sizeof(BOARD_NAME))) { get_backup_values (b); if (strncmp (b->signature, "MPL\0", 4) != 0) { puts ("### No HW ID - assuming " BOARD_NAME); @@ -671,7 +677,6 @@ extern flash_info_t flash_info[]; /* info for FLASH chips */ int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; /* adjust flash start and size as well as the offset */ gd->bd->bi_flashstart=0-flash_info[0].size; gd->bd->bi_flashsize=flash_info[0].size-CFG_MONITOR_LEN; @@ -699,6 +704,18 @@ void print_mip405_rev (void) var, pcbrev + 'A', part & 0x7F, vers); } + +#ifdef CONFIG_POST +/* + * Returns 1 if keys pressed to start the power-on long-running tests + * Called from board_init_f(). + */ +int post_hotkeys_pressed(void) +{ + return 0; /* No hotkeys supported */ +} +#endif + extern void mem_test_reloc(void); extern int mk_date (char *, struct rtc_time *); @@ -706,15 +723,15 @@ int last_stage_init (void) { unsigned long stop; struct rtc_time newtm; - unsigned char *s; + char *s; mem_test_reloc(); /* write correct LED configuration */ - if (miiphy_write (0x1, 0x14, 0x2402) != 0) { + if (miiphy_write("ppc_4xx_eth0", 0x1, 0x14, 0x2402) != 0) { printf ("Error writing to the PHY\n"); } /* since LED/CFG2 is not connected on the -2, * write to correct capability information */ - if (miiphy_write (0x1, 0x4, 0x01E1) != 0) { + if (miiphy_write("ppc_4xx_eth0", 0x1, 0x4, 0x01E1) != 0) { printf ("Error writing to the PHY\n"); } print_mip405_rev ();