X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=board%2Fnvidia%2Fseaboard%2Fseaboard.c;h=e581fddf4349c3ccae1a420edd0aed18f22e7900;hb=0ce033d2582129243aca10d3072a221386bbba44;hp=667f60a9bb940fe27422dc1f27dd24b83fe464d7;hpb=495dbd72dd1172de866ba323263a5b62cf454972;p=u-boot

diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c
index 667f60a9bb..e581fddf43 100644
--- a/board/nvidia/seaboard/seaboard.c
+++ b/board/nvidia/seaboard/seaboard.c
@@ -23,35 +23,23 @@
 
 #include <common.h>
 #include <asm/io.h>
-#include <asm/arch/tegra20.h>
+#include <asm/arch/tegra.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/funcmux.h>
+#include <asm/arch/gpio.h>
 #include <asm/arch/pinmux.h>
-#include <asm/arch/mmc.h>
 #include <asm/gpio.h>
-#ifdef CONFIG_TEGRA_MMC
-#include <mmc.h>
-#endif
 
 /* TODO: Remove this code when the SPI switch is working */
-#ifndef CONFIG_SPI_UART_SWITCH
-/*
- * Routine: gpio_config_uart_seaboard
- * Description: Force GPIO_PI3 low on Seaboard so UART4 works.
- */
-static void gpio_config_uart_seaboard(void)
+#if !defined(CONFIG_SPI_UART_SWITCH) && (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA)
+void gpio_early_init_uart(void)
 {
 	/* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */
+#ifndef CONFIG_SPL_BUILD
 	gpio_request(GPIO_PI3, NULL);
+#endif
 	gpio_direction_output(GPIO_PI3, 0);
 }
-
-void gpio_config_uart(void)
-{
-	if (machine_is_ventana())
-		return;
-	gpio_config_uart_seaboard();
-}
 #endif
 
 #ifdef CONFIG_TEGRA_MMC
@@ -59,7 +47,7 @@ void gpio_config_uart(void)
  * Routine: pin_mux_mmc
  * Description: setup the pin muxes/tristate values for the SDMMC(s)
  */
-static void pin_mux_mmc(void)
+void pin_mux_mmc(void)
 {
 	funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT);
 	funcmux_select(PERIPH_ID_SDMMC3, FUNCMUX_SDMMC3_SDB_4BIT);
@@ -69,26 +57,6 @@ static void pin_mux_mmc(void)
 	/* For CD GPIO PI5 */
 	pinmux_tristate_disable(PINGRP_ATC);
 }
-
-/* this is a weak define that we are overriding */
-int board_mmc_init(bd_t *bd)
-{
-	debug("board_mmc_init called\n");
-
-	/* Enable muxes, etc. for SDMMC controllers */
-	pin_mux_mmc();
-
-	debug("board_mmc_init: init eMMC\n");
-	/* init dev 0, eMMC chip, with 4-bit bus */
-	/* The board has an 8-bit bus, but 8-bit doesn't work yet */
-	tegra_mmc_init(0, 4, -1, -1);
-
-	debug("board_mmc_init: init SD slot\n");
-	/* init dev 1, SD slot, with 4-bit bus */
-	tegra_mmc_init(1, 4, GPIO_PI6, GPIO_PI5);
-
-	return 0;
-}
 #endif
 
 void pin_mux_usb(void)