X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=board%2Fsamtec%2Fvining_fpga%2Fsocfpga.c;h=2ee6d3b554904239db26dcd1f982322af7c6c847;hb=382bee57f19b4454e2015bc19a010bc2d0ab9337;hp=f3a92b5e645087c90f5defe2466112665a9df707;hpb=cc749523ae1adec3856f2b7fe77a6d856da4652a;p=u-boot

diff --git a/board/samtec/vining_fpga/socfpga.c b/board/samtec/vining_fpga/socfpga.c
index f3a92b5e64..2ee6d3b554 100644
--- a/board/samtec/vining_fpga/socfpga.c
+++ b/board/samtec/vining_fpga/socfpga.c
@@ -21,8 +21,8 @@ int board_late_init(void)
 	const unsigned int usb_nrst_gpio = 35;
 	int ret;
 
-	status_led_set(1, STATUS_LED_ON);
-	status_led_set(2, STATUS_LED_ON);
+	status_led_set(1, CONFIG_LED_STATUS_ON);
+	status_led_set(2, CONFIG_LED_STATUS_ON);
 
 	/* Address of boot parameters for ATAG (if ATAG is used) */
 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
@@ -69,9 +69,9 @@ int misc_init_r(void)
 	/* Check EEPROM signature. */
 	if (!(data[0] == 0xa5 && data[1] == 0x5a)) {
 		puts("Invalid I2C EEPROM signature.\n");
-		setenv("unit_serial", "invalid");
-		setenv("unit_ident", "VINing-xxxx-STD");
-		setenv("hostname", "vining-invalid");
+		env_set("unit_serial", "invalid");
+		env_set("unit_ident", "VINing-xxxx-STD");
+		env_set("hostname", "vining-invalid");
 		return 0;
 	}
 
@@ -82,13 +82,13 @@ int misc_init_r(void)
 			 (data[0x56] << 8) | (data[0x57] << 0);
 		memset(str, 0, sizeof(str));
 		sprintf(str, "%07i", serial);
-		setenv("unit_serial", str);
+		env_set("unit_serial", str);
 	}
 
 	if (!getenv("unit_ident")) {
 		memset(str, 0, sizeof(str));
 		memcpy(str, &data[0x2e], 18);
-		setenv("unit_ident", str);
+		env_set("unit_ident", str);
 	}
 
 	/* Set ethernet address from EEPROM. */