X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=board%2Fsunxi%2FKconfig;h=2fcab602db07c2037d5865260393e84eb509ffe1;hb=0f00c38f017feb7f7e710b320e22560d1bd4add7;hp=7555896f740885343dd9f1f49f314635d3b34198;hpb=fce0a90a68de507dc827c1ff40d9e446047fa043;p=u-boot diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 7555896f74..2fcab602db 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -24,125 +24,124 @@ config MACH_SUN7I select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select SUPPORT_SPL + select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT config MACH_SUN8I bool "sun8i (Allwinner A23)" select CPU_V7 + select SUPPORT_SPL endchoice -config SYS_CONFIG_NAME - string - default "sun4i" if MACH_SUN4I - default "sun5i" if MACH_SUN5I - default "sun6i" if MACH_SUN6I - default "sun7i" if MACH_SUN7I - default "sun8i" if MACH_SUN8I - -choice - prompt "Board" - -config TARGET_A10_OLINUXINO_L - bool "A10_OLINUXINO_L" - depends on MACH_SUN4I - -config TARGET_A10S_OLINUXINO_M - bool "A10S_OLINUXINO_M" - depends on MACH_SUN5I - -config TARGET_A13_OLINUXINOM - bool "A13_OLINUXINOM" - depends on MACH_SUN5I - -config TARGET_A13_OLINUXINO - bool "A13_OLINUXINO" - depends on MACH_SUN5I - -config TARGET_A20_OLINUXINO_L2 - bool "A20_OLINUXINO_L2" - depends on MACH_SUN7I - -config TARGET_A20_OLINUXINO_L - bool "A20_OLINUXINO_L" - depends on MACH_SUN7I - -config TARGET_A20_OLINUXINO_M - bool "A20_OLINUXINO_M" - depends on MACH_SUN7I - -config TARGET_AUXTEK_T004 - bool "AUXTEK_T004" - depends on MACH_SUN5I - -config TARGET_BANANAPI - bool "BANANAPI" - depends on MACH_SUN7I - -config TARGET_COLOMBUS - bool "COLOMBUS" - depends on MACH_SUN6I - -config TARGET_CUBIEBOARD2 - bool "CUBIEBOARD2" - depends on MACH_SUN7I - -config TARGET_CUBIEBOARD - bool "CUBIEBOARD" - depends on MACH_SUN4I - -config TARGET_CUBIETRUCK - bool "CUBIETRUCK" - depends on MACH_SUN7I +config DRAM_CLK + int "sunxi dram clock speed" + default 312 if MACH_SUN6I || MACH_SUN8I + default 360 if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I + ---help--- + Set the dram clock speed, valid range 240 - 480, must be a multiple + of 24. -config TARGET_IPPO_Q8H_V5 - bool "IPPO_Q8H_V5" - depends on MACH_SUN8I +if MACH_SUN5I || MACH_SUN7I +config DRAM_MBUS_CLK + int "sunxi mbus clock speed" + default 300 + ---help--- + Set the mbus clock speed. The maximum on sun5i hardware is 300MHz. -config TARGET_PCDUINO3 - bool "PCDUINO3" - depends on MACH_SUN7I +endif -config TARGET_MELE_A1000G - bool "MELE_A1000G" - depends on MACH_SUN4I +config DRAM_ZQ + int "sunxi dram zq value" + default 123 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN8I + default 127 if MACH_SUN7I + ---help--- + Set the dram zq value. -config TARGET_MELE_A1000 - bool "MELE_A1000" - depends on MACH_SUN4I +if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I +config DRAM_EMR1 + int "sunxi dram emr1 value" + default 0 if MACH_SUN4I + default 4 if MACH_SUN5I || MACH_SUN7I + ---help--- + Set the dram controller emr1 value. -config TARGET_MELE_M3 - bool "MELE_M3" - depends on MACH_SUN7I +config DRAM_ODT_EN + int "sunxi dram odt_en value" + default 0 + ---help--- + Set the dram controller odt_en parameter. This can be used to + enable/disable the ODT feature. -config TARGET_MELE_M9 - bool "MELE_M9" - depends on MACH_SUN6I +config DRAM_TPR3 + hex "sunxi dram tpr3 value" + default 0 + ---help--- + Set the dram controller tpr3 parameter. This parameter configures + the delay on the command lane and also phase shifts, which are + applied for sampling incoming read data. The default value 0 + means that no phase/delay adjustments are necessary. Properly + configuring this parameter increases reliability at high DRAM + clock speeds. + +config DRAM_DQS_GATING_DELAY + hex "sunxi dram dqs_gating_delay value" + default 0 + ---help--- + Set the dram controller dqs_gating_delay parmeter. Each byte + encodes the DQS gating delay for each byte lane. The delay + granularity is 1/4 cycle. For example, the value 0x05060606 + means that the delay is 5 quarter-cycles for one lane (1.25 + cycles) and 6 quarter-cycles (1.5 cycles) for 3 other lanes. + The default value 0 means autodetection. The results of hardware + autodetection are not very reliable and depend on the chip + temperature (sometimes producing different results on cold start + and warm reboot). But the accuracy of hardware autodetection + is usually good enough, unless running at really high DRAM + clocks speeds (up to 600MHz). If unsure, keep as 0. -config TARGET_MINI_X_1GB - bool "MINI_X_1GB" - depends on MACH_SUN4I +choice + prompt "sunxi dram timings" + default DRAM_TIMINGS_VENDOR_MAGIC + ---help--- + Select the timings of the DDR3 chips. -config TARGET_MINI_X - bool "MINI_X" - depends on MACH_SUN4I +config DRAM_TIMINGS_VENDOR_MAGIC + bool "Magic vendor timings from Android" + ---help--- + The same DRAM timings as in the Allwinner boot0 bootloader. -config TARGET_BA10_TV_BOX - bool "BA10_TV_BOX" - depends on MACH_SUN4I +config DRAM_TIMINGS_DDR3_1066F_1333H + bool "JEDEC DDR3-1333H with down binning to DDR3-1066F" + ---help--- + Use the timings of the standard JEDEC DDR3-1066F speed bin for + DRAM_CLK <= 533MHz and the timings of the DDR3-1333H speed bin + for DRAM_CLK > 533MHz. This covers the majority of DDR3 chips + used in Allwinner A10/A13/A20 devices. In the case of DDR3-1333 + or DDR3-1600 chips, be sure to check the DRAM datasheet to confirm + that down binning to DDR3-1066F is supported (because DDR3-1066F + uses a bit faster timings than DDR3-1333H). + +config DRAM_TIMINGS_DDR3_800E_1066G_1333J + bool "JEDEC DDR3-800E / DDR3-1066G / DDR3-1333J" + ---help--- + Use the timings of the slowest possible JEDEC speed bin for the + selected DRAM_CLK. Depending on the DRAM_CLK value, it may be + DDR3-800E, DDR3-1066G or DDR3-1333J. -config TARGET_I12_TVBOX - bool "I12_TVBOX" - depends on MACH_SUN7I +endchoice -config TARGET_QT840A - bool "QT840A" - depends on MACH_SUN7I +endif -config TARGET_R7DONGLE - bool "R7DONGLE" - depends on MACH_SUN5I +config SYS_CLK_FREQ + default 912000000 if MACH_SUN7I + default 1008000000 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN8I -endchoice +config SYS_CONFIG_NAME + default "sun4i" if MACH_SUN4I + default "sun5i" if MACH_SUN5I + default "sun6i" if MACH_SUN6I + default "sun7i" if MACH_SUN7I + default "sun8i" if MACH_SUN8I config SYS_BOARD default "sunxi" @@ -154,6 +153,28 @@ config SPL_FEL bool "SPL/FEL mode support" depends on SPL default n + help + This enables support for Fast Early Loader (FEL) mode. This + allows U-Boot to be loaded to the board over USB by the on-chip + boot rom. U-Boot should be sent in two parts: SPL first, with + 'fel write 0x2000 u-boot-spl.bin; fel exe 0x2000' then U-Boot with + 'fel write 0x4a000000 u-boot.bin; fel exe 0x4a000000'. This option + shrinks the amount of SRAM available to SPL, so only enable it if + you need FEL. Note that enabling this option only allows FEL to be + used; it is still possible to boot U-Boot from boot media. U-Boot + SPL detects when it is being loaded using FEL. + +config UART0_PORT_F + bool "UART0 on MicroSD breakout board" + depends on SPL_FEL + default n + ---help--- + Repurpose the SD card slot for getting access to the UART0 serial + console. Primarily useful only for low level u-boot debugging on + tablets, where normal UART0 is difficult to access and requires + device disassembly and/or soldering. As the SD card can't be used + at the same time, the system can be only booted in the FEL mode. + Only enable this if you really know what you are doing. config FDTFILE string "Default fdtfile env setting for this board" @@ -199,6 +220,21 @@ config MMC_SUNXI_SLOT_EXTRA slot or emmc on mmc1 - mmc3. Setting this to 1, 2 or 3 will enable support for this. +config USB0_VBUS_PIN + string "Vbus enable pin for usb0 (otg)" + default "" + ---help--- + Set the Vbus enable pin for usb0 (otg). This takes a string in the + format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H. + +config USB0_VBUS_DET + string "Vbus detect pin for usb0 (otg)" + depends on USB_MUSB_SUNXI + default "" + ---help--- + Set the Vbus detect pin for usb0 (otg). This takes a string in the + format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H. + config USB1_VBUS_PIN string "Vbus enable pin for usb1 (ehci0)" default "PH6" if MACH_SUN4I || MACH_SUN7I @@ -215,4 +251,204 @@ config USB2_VBUS_PIN ---help--- See USB1_VBUS_PIN help text. +config VIDEO + boolean "Enable graphical uboot console on HDMI, LCD or VGA" + default y + ---help--- + Say Y here to add support for using a cfb console on the HDMI, LCD + or VGA output found on most sunxi devices. See doc/README.video for + info on how to select the video output and mode. + +config VIDEO_HDMI + boolean "HDMI output support" + depends on VIDEO && !MACH_SUN8I + default y + ---help--- + Say Y here to add support for outputting video over HDMI. + +config VIDEO_VGA + boolean "VGA output support" + depends on VIDEO && (MACH_SUN4I || MACH_SUN7I) + default n + ---help--- + Say Y here to add support for outputting video over VGA. + +config VIDEO_VGA_VIA_LCD + boolean "VGA via LCD controller support" + depends on VIDEO && (MACH_SUN5I || MACH_SUN6I || MACH_SUN8I) + default n + ---help--- + Say Y here to add support for external DACs connected to the parallel + LCD interface driving a VGA connector, such as found on the + Olimex A13 boards. + +config VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH + boolean "Force sync active high for VGA via LCD controller support" + depends on VIDEO_VGA_VIA_LCD + default n + ---help--- + Say Y here if you've a board which uses opendrain drivers for the vga + hsync and vsync signals. Opendrain drivers cannot generate steep enough + positive edges for a stable video output, so on boards with opendrain + drivers the sync signals must always be active high. + +config VIDEO_VGA_EXTERNAL_DAC_EN + string "LCD panel power enable pin" + depends on VIDEO_VGA_VIA_LCD + default "" + ---help--- + Set the enable pin for the external VGA DAC. This takes a string in the + format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H. + +config VIDEO_LCD_MODE + string "LCD panel timing details" + depends on VIDEO + default "" + ---help--- + LCD panel timing details string, leave empty if there is no LCD panel. + This is in drivers/video/videomodes.c: video_get_params() format, e.g. + x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:0,vmode:0 + +config VIDEO_LCD_DCLK_PHASE + int "LCD panel display clock phase" + depends on VIDEO + default 1 + ---help--- + Select LCD panel display clock phase shift, range 0-3. + +config VIDEO_LCD_POWER + string "LCD panel power enable pin" + depends on VIDEO + default "" + ---help--- + Set the power enable pin for the LCD panel. This takes a string in the + format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H. + +config VIDEO_LCD_RESET + string "LCD panel reset pin" + depends on VIDEO + default "" + ---help--- + Set the reset pin for the LCD panel. This takes a string in the format + understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H. + +config VIDEO_LCD_BL_EN + string "LCD panel backlight enable pin" + depends on VIDEO + default "" + ---help--- + Set the backlight enable pin for the LCD panel. This takes a string in the + the format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of + port H. + +config VIDEO_LCD_BL_PWM + string "LCD panel backlight pwm pin" + depends on VIDEO + default "" + ---help--- + Set the backlight pwm pin for the LCD panel. This takes a string in the + format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H. + +config VIDEO_LCD_BL_PWM_ACTIVE_LOW + bool "LCD panel backlight pwm is inverted" + depends on VIDEO + default y + ---help--- + Set this if the backlight pwm output is active low. + +config VIDEO_LCD_PANEL_I2C + bool "LCD panel needs to be configured via i2c" + depends on VIDEO + default n + ---help--- + Say y here if the LCD panel needs to be configured via i2c. This + will add a bitbang i2c controller using gpios to talk to the LCD. + +config VIDEO_LCD_PANEL_I2C_SDA + string "LCD panel i2c interface SDA pin" + depends on VIDEO_LCD_PANEL_I2C + default "PG12" + ---help--- + Set the SDA pin for the LCD i2c interface. This takes a string in the + format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H. + +config VIDEO_LCD_PANEL_I2C_SCL + string "LCD panel i2c interface SCL pin" + depends on VIDEO_LCD_PANEL_I2C + default "PG10" + ---help--- + Set the SCL pin for the LCD i2c interface. This takes a string in the + format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H. + + +# Note only one of these may be selected at a time! But hidden choices are +# not supported by Kconfig +config VIDEO_LCD_IF_PARALLEL + bool + +config VIDEO_LCD_IF_LVDS + bool + + +choice + prompt "LCD panel support" + depends on VIDEO + ---help--- + Select which type of LCD panel to support. + +config VIDEO_LCD_PANEL_PARALLEL + bool "Generic parallel interface LCD panel" + select VIDEO_LCD_IF_PARALLEL + +config VIDEO_LCD_PANEL_LVDS + bool "Generic lvds interface LCD panel" + select VIDEO_LCD_IF_LVDS + +config VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828 + bool "MIPI 4-lane, 513Mbps LCD panel via SSD2828 bridge chip" + select VIDEO_LCD_SSD2828 + select VIDEO_LCD_IF_PARALLEL + ---help--- + 7.85" 768x1024 LCD panels, such as LG LP079X01 or AUO B079XAN01.0 + +config VIDEO_LCD_PANEL_HITACHI_TX18D42VM + bool "Hitachi tx18d42vm LCD panel" + select VIDEO_LCD_HITACHI_TX18D42VM + select VIDEO_LCD_IF_LVDS + ---help--- + 7.85" 1024x768 Hitachi tx18d42vm LCD panel support + +config VIDEO_LCD_TL059WV5C0 + bool "tl059wv5c0 LCD panel" + select VIDEO_LCD_PANEL_I2C + select VIDEO_LCD_IF_PARALLEL + ---help--- + 6" 480x800 tl059wv5c0 panel support, as used on the Utoo P66 and + Aigo M60/M608/M606 tablets. + +endchoice + + +config USB_MUSB_SUNXI + bool "Enable sunxi OTG / DRC USB controller in host mode" + default n + ---help--- + Say y here to enable support for the sunxi OTG / DRC USB controller + used on almost all sunxi boards. Note currently u-boot can only have + one usb host controller enabled at a time, so enabling this on boards + which also use the ehci host controller will result in build errors. + +config USB_KEYBOARD + boolean "Enable USB keyboard support" + default y + ---help--- + Say Y here to add support for using a USB keyboard (typically used + in combination with a graphical console). + +config GMAC_TX_DELAY + int "GMAC Transmit Clock Delay Chain" + default 0 + ---help--- + Set the GMAC Transmit Clock Delay Chain value. + endif