X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=board%2Fsunxi%2Fboard.c;h=7d6d075f145ee93d4e3463544b7ccd3694ec9771;hb=032c6867a2925c95897afe07d1f0678114254cf6;hp=543b8098e938ff60d62f92b95be62f15229d41e3;hpb=6620377e4b8be3c232c59d673efcd673c30bc69f;p=u-boot

diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 543b8098e9..7d6d075f14 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -12,10 +12,24 @@
  */
 
 #include <common.h>
+#include <mmc.h>
+#ifdef CONFIG_AXP152_POWER
+#include <axp152.h>
+#endif
+#ifdef CONFIG_AXP209_POWER
+#include <axp209.h>
+#endif
+#ifdef CONFIG_AXP221_POWER
+#include <axp221.h>
+#endif
 #include <asm/arch/clock.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/display.h>
 #include <asm/arch/dram.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/mmc.h>
+#include <asm/io.h>
+#include <net.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -61,9 +75,9 @@ static void mmc_pinmux_setup(int sdc)
 		break;
 
 	case 1:
-		/* CMD-PH22, CLK-PH23, D0~D3-PH24~27 : 5 */
-		for (pin = SUNXI_GPH(22); pin <= SUNXI_GPH(27); pin++) {
-			sunxi_gpio_set_cfgpin(pin, SUN4I_GPH22_SDC1);
+		/* CMD-PG3, CLK-PG4, D0~D3-PG5-8 */
+		for (pin = SUNXI_GPG(3); pin <= SUNXI_GPG(8); pin++) {
+			sunxi_gpio_set_cfgpin(pin, SUN5I_GPG3_SDC1);
 			sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
 			sunxi_gpio_set_drv(pin, 2);
 		}
@@ -95,11 +109,36 @@ static void mmc_pinmux_setup(int sdc)
 
 int board_mmc_init(bd_t *bis)
 {
+	__maybe_unused struct mmc *mmc0, *mmc1;
+	__maybe_unused char buf[512];
+
 	mmc_pinmux_setup(CONFIG_MMC_SUNXI_SLOT);
-	sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT);
-#if !defined (CONFIG_SPL_BUILD) && defined (CONFIG_MMC_SUNXI_SLOT_EXTRA)
+	mmc0 = sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT);
+	if (!mmc0)
+		return -1;
+
+#if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
 	mmc_pinmux_setup(CONFIG_MMC_SUNXI_SLOT_EXTRA);
-	sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT_EXTRA);
+	mmc1 = sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT_EXTRA);
+	if (!mmc1)
+		return -1;
+#endif
+
+#if CONFIG_MMC_SUNXI_SLOT == 0 && CONFIG_MMC_SUNXI_SLOT_EXTRA == 2
+	/*
+	 * Both mmc0 and mmc2 are bootable, figure out where we're booting
+	 * from. Try mmc0 first, just like the brom does.
+	 */
+	if (mmc_getcd(mmc0) && mmc_init(mmc0) == 0 &&
+	    mmc0->block_dev.block_read(0, 16, 1, buf) == 1) {
+		buf[12] = 0;
+		if (strcmp(&buf[4], "eGON.BT0") == 0)
+			return 0;
+	}
+
+	/* no bootable card in mmc0, so we must be booting from mmc2, swap */
+	mmc0->block_dev.dev = 1;
+	mmc1->block_dev.dev = 0;
 #endif
 
 	return 0;
@@ -116,12 +155,87 @@ void i2c_init_board(void)
 #ifdef CONFIG_SPL_BUILD
 void sunxi_board_init(void)
 {
+	int power_failed = 0;
 	unsigned long ramsize;
 
+#ifdef CONFIG_AXP152_POWER
+	power_failed = axp152_init();
+	power_failed |= axp152_set_dcdc2(1400);
+	power_failed |= axp152_set_dcdc3(1500);
+	power_failed |= axp152_set_dcdc4(1250);
+	power_failed |= axp152_set_ldo2(3000);
+#endif
+#ifdef CONFIG_AXP209_POWER
+	power_failed |= axp209_init();
+	power_failed |= axp209_set_dcdc2(1400);
+	power_failed |= axp209_set_dcdc3(1250);
+	power_failed |= axp209_set_ldo2(3000);
+	power_failed |= axp209_set_ldo3(2800);
+	power_failed |= axp209_set_ldo4(2800);
+#endif
+#ifdef CONFIG_AXP221_POWER
+	power_failed = axp221_init();
+	power_failed |= axp221_set_dcdc1(CONFIG_AXP221_DCDC1_VOLT);
+	power_failed |= axp221_set_dcdc2(1200); /* A31:VDD-GPU, A23:VDD-SYS */
+	power_failed |= axp221_set_dcdc3(1200); /* VDD-CPU */
+#ifdef CONFIG_MACH_SUN6I
+	power_failed |= axp221_set_dcdc4(1200); /* A31:VDD-SYS */
+#else
+	power_failed |= axp221_set_dcdc4(0);    /* A23:unused */
+#endif
+	power_failed |= axp221_set_dcdc5(1500); /* VCC-DRAM */
+	power_failed |= axp221_set_dldo1(CONFIG_AXP221_DLDO1_VOLT);
+	power_failed |= axp221_set_dldo4(CONFIG_AXP221_DLDO4_VOLT);
+	power_failed |= axp221_set_aldo1(CONFIG_AXP221_ALDO1_VOLT);
+	power_failed |= axp221_set_aldo2(CONFIG_AXP221_ALDO2_VOLT);
+	power_failed |= axp221_set_aldo3(CONFIG_AXP221_ALDO3_VOLT);
+#endif
+
 	printf("DRAM:");
 	ramsize = sunxi_dram_init();
 	printf(" %lu MiB\n", ramsize >> 20);
 	if (!ramsize)
 		hang();
+
+	/*
+	 * Only clock up the CPU to full speed if we are reasonably
+	 * assured it's being powered with suitable core voltage
+	 */
+	if (!power_failed)
+		clock_set_pll1(CONFIG_CLK_FULL_SPEED);
+	else
+		printf("Failed to set core voltage! Can't set CPU frequency\n");
 }
 #endif
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+	unsigned int sid[4];
+
+	if (!getenv("ethaddr") && sunxi_get_sid(sid) == 0 &&
+			sid[0] != 0 && sid[3] != 0) {
+		uint8_t mac_addr[6];
+
+		mac_addr[0] = 0x02; /* Non OUI / registered MAC address */
+		mac_addr[1] = (sid[0] >>  0) & 0xff;
+		mac_addr[2] = (sid[3] >> 24) & 0xff;
+		mac_addr[3] = (sid[3] >> 16) & 0xff;
+		mac_addr[4] = (sid[3] >>  8) & 0xff;
+		mac_addr[5] = (sid[3] >>  0) & 0xff;
+
+		eth_setenv_enetaddr("ethaddr", mac_addr);
+	}
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_OF_BOARD_SETUP
+int ft_board_setup(void *blob, bd_t *bd)
+{
+#ifdef CONFIG_VIDEO_DT_SIMPLEFB
+	return sunxi_simplefb_setup(blob);
+#endif
+}
+#endif /* CONFIG_OF_BOARD_SETUP */