X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=board%2Ftrab%2Frs485.c;h=6a3a4cda9ce5e56895f30465799a3e5a9a6647ed;hb=272017853339f5b9685f9488bdaf5405812d12a4;hp=97aea91c8e9d1f2c42a8c6ea55c12c02f29b4fc7;hpb=792a09eb9d5d8c4f74b7e9f2e887316d511a4e80;p=u-boot

diff --git a/board/trab/rs485.c b/board/trab/rs485.c
index 97aea91c8e..6a3a4cda9c 100644
--- a/board/trab/rs485.c
+++ b/board/trab/rs485.c
@@ -2,7 +2,7 @@
  * (C) Copyright 2003
  * Martin Krause, TQ-Systems GmbH, <martin.krause@tqs.de>
  *
- * Based on cpu/arm920t/serial.c, by Gary Jennejohn
+ * Based on arch/arm/cpu/arm920t/serial.c, by Gary Jennejohn
  * (C) Copyright 2002 Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -22,7 +22,7 @@
  */
 
 #include <common.h>
-#include <s3c2400.h>
+#include <asm/arch/s3c24x0_cpu.h>
 #include "rs485.h"
 
 static void rs485_setbrg (void);
@@ -42,7 +42,7 @@ static void trab_rs485_disable_rx(void);
 
 static void rs485_setbrg (void)
 {
-	S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
+	struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR);
 	int i;
 	unsigned int reg = 0;
 
@@ -67,7 +67,7 @@ static void rs485_setbrg (void)
 
 static void rs485_cfgio (void)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	gpio->PFCON &= ~(0x3 << 2);
 	gpio->PFCON |=  (0x2 << 2); /* configure GPF1 as RXD1 */
@@ -101,7 +101,7 @@ int rs485_init (void)
  */
 int rs485_getc (void)
 {
-	S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
+	struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR);
 
 	/* wait for character to arrive */
 	while (!(uart->UTRSTAT & 0x1));
@@ -114,7 +114,7 @@ int rs485_getc (void)
  */
 void rs485_putc (const char c)
 {
-	S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
+	struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR);
 
 	/* wait for room in the tx FIFO */
 	while (!(uart->UTRSTAT & 0x2));
@@ -131,7 +131,7 @@ void rs485_putc (const char c)
  */
 int rs485_tstc (void)
 {
-	S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
+	struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR);
 
 	return uart->UTRSTAT & 0x1;
 }
@@ -168,7 +168,7 @@ static void set_rs485re(unsigned char rs485re_state)
 
 static void set_rs485de(unsigned char rs485de_state)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	/* This is on PORT A bit 11 */
 	if(rs485de_state)