X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=board%2Fxilinx%2Fzynq%2Fboard.c;h=738c31c6ee1f568cc95a6dd47ce34579f2853b64;hb=ade8bc14ad419f698406b162c9c5dfeee7406b4c;hp=82f2345c956b2bb61ae8398371a8f473c28bace8;hpb=4c89a369c7cd6e7ad3adec4601cfa69fec476164;p=u-boot

diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c
index 82f2345c95..738c31c6ee 100644
--- a/board/xilinx/zynq/board.c
+++ b/board/xilinx/zynq/board.c
@@ -5,6 +5,9 @@
  */
 
 #include <common.h>
+#include <fdtdec.h>
+#include <fpga.h>
+#include <mmc.h>
 #include <netdev.h>
 #include <zynqpl.h>
 #include <asm/arch/hardware.h>
@@ -12,21 +15,24 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifdef CONFIG_FPGA
-Xilinx_desc fpga;
+#if (defined(CONFIG_FPGA) && !defined(CONFIG_SPL_BUILD)) || \
+    (defined(CONFIG_SPL_FPGA_SUPPORT) && defined(CONFIG_SPL_BUILD))
+static xilinx_desc fpga;
 
 /* It can be done differently */
-Xilinx_desc fpga010 = XILINX_XC7Z010_DESC(0x10);
-Xilinx_desc fpga015 = XILINX_XC7Z015_DESC(0x15);
-Xilinx_desc fpga020 = XILINX_XC7Z020_DESC(0x20);
-Xilinx_desc fpga030 = XILINX_XC7Z030_DESC(0x30);
-Xilinx_desc fpga045 = XILINX_XC7Z045_DESC(0x45);
-Xilinx_desc fpga100 = XILINX_XC7Z100_DESC(0x100);
+static xilinx_desc fpga010 = XILINX_XC7Z010_DESC(0x10);
+static xilinx_desc fpga015 = XILINX_XC7Z015_DESC(0x15);
+static xilinx_desc fpga020 = XILINX_XC7Z020_DESC(0x20);
+static xilinx_desc fpga030 = XILINX_XC7Z030_DESC(0x30);
+static xilinx_desc fpga035 = XILINX_XC7Z035_DESC(0x35);
+static xilinx_desc fpga045 = XILINX_XC7Z045_DESC(0x45);
+static xilinx_desc fpga100 = XILINX_XC7Z100_DESC(0x100);
 #endif
 
 int board_init(void)
 {
-#ifdef CONFIG_FPGA
+#if (defined(CONFIG_FPGA) && !defined(CONFIG_SPL_BUILD)) || \
+    (defined(CONFIG_SPL_FPGA_SUPPORT) && defined(CONFIG_SPL_BUILD))
 	u32 idcode;
 
 	idcode = zynq_slcr_get_idcode();
@@ -44,6 +50,9 @@ int board_init(void)
 	case XILINX_ZYNQ_7030:
 		fpga = fpga030;
 		break;
+	case XILINX_ZYNQ_7035:
+		fpga = fpga035;
+		break;
 	case XILINX_ZYNQ_7045:
 		fpga = fpga045;
 		break;
@@ -53,7 +62,8 @@ int board_init(void)
 	}
 #endif
 
-#ifdef CONFIG_FPGA
+#if (defined(CONFIG_FPGA) && !defined(CONFIG_SPL_BUILD)) || \
+    (defined(CONFIG_SPL_FPGA_SUPPORT) && defined(CONFIG_SPL_BUILD))
 	fpga_init();
 	fpga_add(fpga_xilinx, &fpga);
 #endif
@@ -81,6 +91,14 @@ int board_late_init(void)
 	return 0;
 }
 
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+	puts("Board:\tXilinx Zynq\n");
+	return 0;
+}
+#endif
+
 int board_eth_init(bd_t *bis)
 {
 	u32 ret = 0;
@@ -105,11 +123,13 @@ int board_eth_init(bd_t *bis)
 #if defined(CONFIG_ZYNQ_GEM)
 # if defined(CONFIG_ZYNQ_GEM0)
 	ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR0,
-						CONFIG_ZYNQ_GEM_PHY_ADDR0, 0);
+				   CONFIG_ZYNQ_GEM_PHY_ADDR0,
+				   CONFIG_ZYNQ_GEM_EMIO0);
 # endif
 # if defined(CONFIG_ZYNQ_GEM1)
 	ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR1,
-						CONFIG_ZYNQ_GEM_PHY_ADDR1, 0);
+				   CONFIG_ZYNQ_GEM_PHY_ADDR1,
+				   CONFIG_ZYNQ_GEM_EMIO1);
 # endif
 #endif
 	return ret;
@@ -134,8 +154,27 @@ int board_mmc_init(bd_t *bd)
 
 int dram_init(void)
 {
+#ifdef CONFIG_OF_CONTROL
+	int node;
+	fdt_addr_t addr;
+	fdt_size_t size;
+	const void *blob = gd->fdt_blob;
+
+	node = fdt_node_offset_by_prop_value(blob, -1, "device_type",
+					     "memory", 7);
+	if (node == -FDT_ERR_NOTFOUND) {
+		debug("ZYNQ DRAM: Can't get memory node\n");
+		return -1;
+	}
+	addr = fdtdec_get_addr_size(blob, node, "reg", &size);
+	if (addr == FDT_ADDR_T_NONE || size == 0) {
+		debug("ZYNQ DRAM: Can't get base address or size\n");
+		return -1;
+	}
+	gd->ram_size = size;
+#else
 	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
-
+#endif
 	zynq_ddrc_init();
 
 	return 0;