X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=cmd%2FKconfig;h=2fa0829925c1b9f290d982fbbc1a008a7dcdc2ba;hb=HEAD;hp=d440675b6e38a8285ac5982247e2436fa0a8d251;hpb=e89f8aae3d67cd3d2d04cedd9735c5e5fd32b621;p=u-boot diff --git a/cmd/Kconfig b/cmd/Kconfig index d440675b6e..2fa0829925 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -137,8 +137,6 @@ config AUTOBOOT_STOP_STR_SHA256 endmenu -source "cmd/fastboot/Kconfig" - config BUILD_BIN2C bool @@ -228,7 +226,7 @@ config CMD_BOOTEFI config CMD_BOOTEFI_HELLO_COMPILE bool "Compile a standard EFI hello world binary for testing" - depends on CMD_BOOTEFI && (ARM || X86) + depends on CMD_BOOTEFI && (ARM || X86 || RISCV) default y help This compiles a standard EFI hello world application with U-Boot so @@ -601,6 +599,14 @@ config CMD_ARMFLASH help ARM Ltd reference designs flash partition access +config CMD_ADC + bool "adc - Access Analog to Digital Converters info and data" + select ADC + select DM_REGULATOR + help + Shows ADC device info and permit printing one-shot analog converted + data from a named Analog to Digital Converter. + config CMD_CLK bool "clk - Show clock frequencies" help @@ -642,6 +648,18 @@ config CMD_DM can be useful to see the state of driver model for debugging or interest. +config CMD_FASTBOOT + bool "fastboot - Android fastboot support" + depends on FASTBOOT + help + This enables the command "fastboot" which enables the Android + fastboot mode for the platform. Fastboot is a protocol for + downloading images, flashing and device control used on + Android devices. Fastboot requires either the network stack + enabled or support for acting as a USB device. + + See doc/README.android-fastboot for more information. + config CMD_FDC bool "fdcboot - Boot from floppy device" help @@ -689,6 +707,13 @@ config CMD_FPGA_LOADP Supports loading an FPGA device from a bitstream buffer containing a partial bitstream. +config CMD_FPGA_LOAD_SECURE + bool "fpga loads - loads secure bitstreams (Xilinx only)" + depends on CMD_FPGA + help + Enables the fpga loads command which is used to load secure + (authenticated or encrypted or both) bitstreams on to FPGA. + config CMD_FPGAD bool "fpgad - dump FPGA registers" help @@ -808,6 +833,21 @@ config CMD_MMC help MMC memory mapped support. +config CMD_MMC_RPMB + bool "Enable support for RPMB in the mmc command" + depends on CMD_MMC + help + Enable the commands for reading, writing and programming the + key for the Replay Protection Memory Block partition in eMMC. + +config CMD_MMC_SWRITE + bool "mmc swrite" + depends on CMD_MMC && MMC_WRITE + select IMAGE_SPARSE + help + Enable support for the "mmc swrite" command to write Android sparse + images to eMMC. + config CMD_NAND bool "nand" default y if NAND_SUNXI @@ -1021,46 +1061,141 @@ config CMD_SETEXPR endmenu -menu "Network commands" - if NET -config CMD_NET - bool "bootp, tftpboot" +menuconfig CMD_NET + bool "Network commands" + default y + +if CMD_NET + +config CMD_BOOTP + bool "bootp" default y help - Network commands. bootp - boot image via network using BOOTP/TFTP protocol + +config CMD_DHCP + bool "dhcp" + depends on CMD_BOOTP + help + Boot image via network using DHCP/TFTP protocol + +config BOOTP_BOOTPATH + bool "Request & store 'rootpath' from BOOTP/DHCP server" + default y + depends on CMD_BOOTP + help + Even though the config is called BOOTP_BOOTPATH, it stores the + path in the variable 'rootpath'. + +config BOOTP_DNS + bool "Request & store 'dnsip' from BOOTP/DHCP server" + default y + depends on CMD_BOOTP + help + The primary DNS server is stored as 'dnsip'. If two servers are + returned, you must set BOOTP_DNS2 to store that second server IP + also. + +config BOOTP_DNS2 + bool "Store 'dnsip2' from BOOTP/DHCP server" + depends on BOOTP_DNS + help + If a DHCP client requests the DNS server IP from a DHCP server, + it is possible that more than one DNS serverip is offered to the + client. If CONFIG_BOOTP_DNS2 is enabled, the secondary DNS + server IP will be stored in the additional environment + variable "dnsip2". The first DNS serverip is always + stored in the variable "dnsip", when BOOTP_DNS is defined. + +config BOOTP_GATEWAY + bool "Request & store 'gatewayip' from BOOTP/DHCP server" + default y + depends on CMD_BOOTP + +config BOOTP_HOSTNAME + bool "Request & store 'hostname' from BOOTP/DHCP server" + default y + depends on CMD_BOOTP + help + The name may or may not be qualified with the local domain name. + +config BOOTP_PREFER_SERVERIP + bool "serverip variable takes precedent over DHCP server IP." + depends on CMD_BOOTP + help + By default a BOOTP/DHCP reply will overwrite the 'serverip' variable. + + With this option enabled, the 'serverip' variable in the environment + takes precedence over DHCP server IP and will only be set by the DHCP + server if not already set in the environment. + +config BOOTP_SUBNETMASK + bool "Request & store 'netmask' from BOOTP/DHCP server" + default y + depends on CMD_BOOTP + +config BOOTP_NTPSERVER + bool "Request & store 'ntpserverip' from BOOTP/DHCP server" + depends on CMD_BOOTP + +config BOOTP_PXE + bool "Send PXE client arch to BOOTP/DHCP server" + default y + depends on CMD_BOOTP && CMD_PXE + help + Supported for ARM, ARM64, and x86 for now. + +config BOOTP_PXE_CLIENTARCH + hex + depends on BOOTP_PXE + default 0x16 if ARM64 + default 0x15 if ARM + default 0 if X86 + +config BOOTP_VCI_STRING + string + depends on CMD_BOOTP + default "U-Boot.armv7" if CPU_V7A || CPU_V7M || CPU_V7R + default "U-Boot.armv8" if ARM64 + default "U-Boot.arm" if ARM + default "U-Boot" + +config CMD_TFTPBOOT + bool "tftpboot" + default y + help tftpboot - boot image via network using TFTP protocol config CMD_TFTPPUT bool "tftp put" + depends on CMD_TFTPBOOT help TFTP put command, for uploading files to a server config CMD_TFTPSRV bool "tftpsrv" + depends on CMD_TFTPBOOT help Act as a TFTP server and boot the first received file +config NET_TFTP_VARS + bool "Control TFTP timeout and count through environment" + depends on CMD_TFTPBOOT + default y + help + If set, allows controlling the TFTP timeout through the + environment variable tftptimeout, and the TFTP maximum + timeout count through the variable tftptimeoutcountmax. + If unset, timeout and maximum are hard-defined as 1 second + and 10 timouts per TFTP transfer. + config CMD_RARP bool "rarpboot" help Boot image via network using RARP/TFTP protocol -config CMD_DHCP - bool "dhcp" - depends on CMD_NET - help - Boot image via network using DHCP/TFTP protocol - -config CMD_PXE - bool "pxe" - depends on CMD_NET - select MENU - help - Boot image via network using PXE protocol - config CMD_NFS bool "nfs" default y @@ -1094,9 +1229,12 @@ config CMD_DNS config CMD_LINK_LOCAL bool "linklocal" + select LIB_RAND help Acquire a network IP address using the link-local protocol +endif + config CMD_ETHSW bool "ethsw" help @@ -1105,9 +1243,18 @@ config CMD_ETHSW operations such as enabling / disabling a port and viewing/maintaining the filtering database (FDB) -endif +config CMD_PXE + bool "pxe" + select MENU + help + Boot image via network using PXE protocol -endmenu +config CMD_WOL + bool "wol" + help + Wait for wake-on-lan Magic Packet + +endif menu "Misc commands" @@ -1123,6 +1270,13 @@ config CMD_BMP the image into RAM, then using this command to look at it or display it. +config CMD_BOOTCOUNT + bool "bootcount" + depends on BOOTCOUNT_LIMIT + help + Enable the bootcount command, which allows interrogation and + reset of the bootcounter. + config CMD_BSP bool "Enable board-specific commands" help @@ -1202,6 +1356,13 @@ config CMD_MISC help Delay execution for some time +config MP + bool "support for multiprocessor" + help + This provides an option to brinup + different processors in multiprocessor + cases. + config CMD_TIMER bool "timer" help @@ -1358,31 +1519,57 @@ config CMD_HASH saved to memory or to an environment variable. It is also possible to verify a hash against data in memory. +config CMD_HVC + bool "Support the 'hvc' command" + depends on ARM_SMCCC + help + Allows issuing Hypervisor Calls (HVCs). Mostly useful for + development and testing. + +config CMD_SMC + bool "Support the 'smc' command" + depends on ARM_SMCCC + help + Allows issuing Secure Monitor Calls (SMCs). Mostly useful for + development and testing. + config HASH_VERIFY bool "hash -v" depends on CMD_HASH help Add -v option to verify data against a hash. +config CMD_TPM_V1 + bool + +config CMD_TPM_V2 + bool + config CMD_TPM bool "Enable the 'tpm' command" - depends on TPM + depends on TPM_V1 || TPM_V2 + select CMD_TPM_V1 if TPM_V1 + select CMD_TPM_V2 if TPM_V2 help This provides a means to talk to a TPM from the command line. A wide range of commands if provided - see 'tpm help' for details. The command requires a suitable TPM on your board and the correct driver must be enabled. +if CMD_TPM + config CMD_TPM_TEST bool "Enable the 'tpm test' command" - depends on CMD_TPM + depends on TPM_V1 help - This provides a a series of tests to confirm that the TPM is working - correctly. The tests cover initialisation, non-volatile RAM, extend, - global lock and checking that timing is within expectations. The - tests pass correctly on Infineon TPMs but may need to be adjusted + This provides a a series of tests to confirm that the TPMv1.x is + working correctly. The tests cover initialisation, non-volatile RAM, + extend, global lock and checking that timing is within expectations. + The tests pass correctly on Infineon TPMs but may need to be adjusted for other devices. +endif + endmenu menu "Firmware commands" @@ -1573,6 +1760,7 @@ config CMD_KGDB config CMD_LOG bool "log - Generation, control and access to logging" + select LOG help This provides access to logging features. It allows the output of log data to be controlled to a limited extent (setting up the default @@ -1588,6 +1776,22 @@ config CMD_TRACE for analsys (e.g. using bootchart). See doc/README.trace for full details. +config CMD_AVB + bool "avb - Android Verified Boot 2.0 operations" + depends on LIBAVB + default n + help + Enables a "avb" command to perform verification of partitions using + Android Verified Boot 2.0 functionality. It includes such subcommands: + avb init - initialize avb2 subsystem + avb read_rb - read rollback index + avb write_rb - write rollback index + avb is_unlocked - check device lock state + avb get_uuid - read and print uuid of a partition + avb read_part - read data from partition + avb read_part_hex - read data from partition and output to stdout + avb write_part - write data to partition + avb verify - run full verification chain endmenu config CMD_UBI