X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=cmd%2FKconfig;h=45c83359add828a60dd8e6f69f9b4abb39a2e44d;hb=60b2f9e7b97580b3a71d6fa119fc9c66491d963e;hp=cffc3afc4505fd16f8f8360bcdde0a23e585e7ea;hpb=7049f620002b18eef4ffc6512efafac4177e1b01;p=u-boot

diff --git a/cmd/Kconfig b/cmd/Kconfig
index cffc3afc45..45c83359ad 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -137,8 +137,6 @@ config AUTOBOOT_STOP_STR_SHA256
 
 endmenu
 
-source "cmd/fastboot/Kconfig"
-
 config BUILD_BIN2C
 	bool
 
@@ -228,7 +226,7 @@ config CMD_BOOTEFI
 
 config CMD_BOOTEFI_HELLO_COMPILE
 	bool "Compile a standard EFI hello world binary for testing"
-	depends on CMD_BOOTEFI && (ARM || X86)
+	depends on CMD_BOOTEFI && (ARM || X86 || RISCV)
 	default y
 	help
 	  This compiles a standard EFI hello world application with U-Boot so
@@ -650,6 +648,18 @@ config CMD_DM
 	  can be useful to see the state of driver model for debugging or
 	  interest.
 
+config CMD_FASTBOOT
+	bool "fastboot - Android fastboot support"
+	depends on FASTBOOT
+	help
+	  This enables the command "fastboot" which enables the Android
+	  fastboot mode for the platform. Fastboot is a protocol for
+	  downloading images, flashing and device control used on
+	  Android devices. Fastboot requires either the network stack
+	  enabled or support for acting as a USB device.
+
+	  See doc/README.android-fastboot for more information.
+
 config CMD_FDC
 	bool "fdcboot - Boot from floppy device"
 	help
@@ -697,6 +707,13 @@ config CMD_FPGA_LOADP
 	  Supports loading an FPGA device from a bitstream buffer containing
 	  a partial bitstream.
 
+config CMD_FPGA_LOAD_SECURE
+	bool "fpga loads - loads secure bitstreams (Xilinx only)"
+	depends on CMD_FPGA
+	help
+	  Enables the fpga loads command which is used to load secure
+	  (authenticated or encrypted or both) bitstreams on to FPGA.
+
 config CMD_FPGAD
 	bool "fpgad - dump FPGA registers"
 	help
@@ -823,6 +840,14 @@ config CMD_MMC_RPMB
 	  Enable the commands for reading, writing and programming the
 	  key for the Replay Protection Memory Block partition in eMMC.
 
+config CMD_MMC_SWRITE
+	bool "mmc swrite"
+	depends on CMD_MMC && MMC_WRITE
+	select IMAGE_SPARSE
+	help
+	  Enable support for the "mmc swrite" command to write Android sparse
+	  images to eMMC.
+
 config CMD_NAND
 	bool "nand"
 	default y if NAND_SUNXI
@@ -1194,6 +1219,7 @@ config CMD_DNS
 
 config CMD_LINK_LOCAL
 	bool "linklocal"
+	select LIB_RAND
 	help
 	  Acquire a network IP address using the link-local protocol
 
@@ -1491,25 +1517,37 @@ config HASH_VERIFY
 	help
 	  Add -v option to verify data against a hash.
 
+config CMD_TPM_V1
+	bool
+
+config CMD_TPM_V2
+	bool
+
 config CMD_TPM
 	bool "Enable the 'tpm' command"
-	depends on TPM
+	depends on TPM_V1 || TPM_V2
+	select CMD_TPM_V1 if TPM_V1
+	select CMD_TPM_V2 if TPM_V2
 	help
 	  This provides a means to talk to a TPM from the command line. A wide
 	  range of commands if provided - see 'tpm help' for details. The
 	  command requires a suitable TPM on your board and the correct driver
 	  must be enabled.
 
+if CMD_TPM
+
 config CMD_TPM_TEST
 	bool "Enable the 'tpm test' command"
-	depends on CMD_TPM
+	depends on TPM_V1
 	help
-	  This provides a a series of tests to confirm that the TPM is working
-	  correctly. The tests cover initialisation, non-volatile RAM, extend,
-	  global lock and checking that timing is within expectations. The
-	  tests pass correctly on Infineon TPMs but may need to be adjusted
+	  This provides a a series of tests to confirm that the TPMv1.x is
+	  working correctly. The tests cover initialisation, non-volatile RAM,
+	  extend, global lock and checking that timing is within expectations.
+	  The tests pass correctly on Infineon TPMs but may need to be adjusted
 	  for other devices.
 
+endif
+
 endmenu
 
 menu "Firmware commands"
@@ -1716,6 +1754,22 @@ config CMD_TRACE
 	  for analsys (e.g. using bootchart). See doc/README.trace for full
 	  details.
 
+config CMD_AVB
+	bool "avb - Android Verified Boot 2.0 operations"
+	depends on LIBAVB
+	default n
+	help
+	  Enables a "avb" command to perform verification of partitions using
+	  Android Verified Boot 2.0 functionality. It includes such subcommands:
+	    avb init - initialize avb2 subsystem
+	    avb read_rb - read rollback index
+	    avb write_rb - write rollback index
+	    avb is_unlocked - check device lock state
+	    avb get_uuid - read and print uuid of a partition
+	    avb read_part - read data from partition
+	    avb read_part_hex - read data from partition and output to stdout
+	    avb write_part - write data to partition
+	    avb verify - run full verification chain
 endmenu
 
 config CMD_UBI