X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=cmd%2FKconfig;h=48a2a5720cf600853ef0e3c6ea0a2426167dc1d3;hb=caa2a2e5ab44d87faf51fafc780ecc985e0c05d6;hp=eb14e08f773d93cbec9ef5812544d22bc7361649;hpb=e8f80a5a58c9b506453cc0780687e8ed457d30a6;p=u-boot

diff --git a/cmd/Kconfig b/cmd/Kconfig
index eb14e08f77..48a2a5720c 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -137,8 +137,6 @@ config AUTOBOOT_STOP_STR_SHA256
 
 endmenu
 
-source "cmd/fastboot/Kconfig"
-
 config BUILD_BIN2C
 	bool
 
@@ -228,7 +226,7 @@ config CMD_BOOTEFI
 
 config CMD_BOOTEFI_HELLO_COMPILE
 	bool "Compile a standard EFI hello world binary for testing"
-	depends on CMD_BOOTEFI && (ARM || X86)
+	depends on CMD_BOOTEFI && (ARM || X86 || RISCV)
 	default y
 	help
 	  This compiles a standard EFI hello world application with U-Boot so
@@ -650,6 +648,18 @@ config CMD_DM
 	  can be useful to see the state of driver model for debugging or
 	  interest.
 
+config CMD_FASTBOOT
+	bool "fastboot - Android fastboot support"
+	depends on FASTBOOT
+	help
+	  This enables the command "fastboot" which enables the Android
+	  fastboot mode for the platform. Fastboot is a protocol for
+	  downloading images, flashing and device control used on
+	  Android devices. Fastboot requires either the network stack
+	  enabled or support for acting as a USB device.
+
+	  See doc/README.android-fastboot for more information.
+
 config CMD_FDC
 	bool "fdcboot - Boot from floppy device"
 	help
@@ -816,6 +826,21 @@ config CMD_MMC
 	help
 	  MMC memory mapped support.
 
+config CMD_MMC_RPMB
+	bool "Enable support for RPMB in the mmc command"
+	depends on CMD_MMC
+	help
+	  Enable the commands for reading, writing and programming the
+	  key for the Replay Protection Memory Block partition in eMMC.
+
+config CMD_MMC_SWRITE
+	bool "mmc swrite"
+	depends on CMD_MMC && MMC_WRITE
+	select IMAGE_SPARSE
+	help
+	  Enable support for the "mmc swrite" command to write Android sparse
+	  images to eMMC.
+
 config CMD_NAND
 	bool "nand"
 	default y if NAND_SUNXI
@@ -1094,6 +1119,10 @@ config BOOTP_SUBNETMASK
 	default y
 	depends on CMD_BOOTP
 
+config BOOTP_NTPSERVER
+	bool "Request & store 'ntpserverip' from BOOTP/DHCP server"
+	depends on CMD_BOOTP
+
 config BOOTP_PXE
 	bool "Send PXE client arch to BOOTP/DHCP server"
 	default y
@@ -1218,6 +1247,13 @@ config CMD_BMP
 	  the image into RAM, then using this command to look at it or display
 	  it.
 
+config CMD_BOOTCOUNT
+	bool "bootcount"
+	depends on BOOTCOUNT_LIMIT
+	help
+	  Enable the bootcount command, which allows interrogation and
+	  reset of the bootcounter.
+
 config CMD_BSP
 	bool "Enable board-specific commands"
 	help
@@ -1473,25 +1509,37 @@ config HASH_VERIFY
 	help
 	  Add -v option to verify data against a hash.
 
+config CMD_TPM_V1
+	bool
+
+config CMD_TPM_V2
+	bool
+
 config CMD_TPM
 	bool "Enable the 'tpm' command"
-	depends on TPM
+	depends on TPM_V1 || TPM_V2
+	select CMD_TPM_V1 if TPM_V1
+	select CMD_TPM_V2 if TPM_V2
 	help
 	  This provides a means to talk to a TPM from the command line. A wide
 	  range of commands if provided - see 'tpm help' for details. The
 	  command requires a suitable TPM on your board and the correct driver
 	  must be enabled.
 
+if CMD_TPM
+
 config CMD_TPM_TEST
 	bool "Enable the 'tpm test' command"
-	depends on CMD_TPM
+	depends on TPM_V1
 	help
-	  This provides a a series of tests to confirm that the TPM is working
-	  correctly. The tests cover initialisation, non-volatile RAM, extend,
-	  global lock and checking that timing is within expectations. The
-	  tests pass correctly on Infineon TPMs but may need to be adjusted
+	  This provides a a series of tests to confirm that the TPMv1.x is
+	  working correctly. The tests cover initialisation, non-volatile RAM,
+	  extend, global lock and checking that timing is within expectations.
+	  The tests pass correctly on Infineon TPMs but may need to be adjusted
 	  for other devices.
 
+endif
+
 endmenu
 
 menu "Firmware commands"