X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=common%2FKconfig;h=4da095a4fd76240ae2490bcb3a76a9014169995f;hb=effb79027e9a178c14e80f48c907332048d0fb3d;hp=7273c3faca7b2e9a5c7a10571b76c54866309d1c;hpb=4585601ae2147730fcf342ed9b57a2c684503490;p=u-boot diff --git a/common/Kconfig b/common/Kconfig index 7273c3faca..4da095a4fd 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -18,6 +18,15 @@ config BOOTSTAGE Calls to show_boot_progress() will also result in log entries but these will not have names. +config SPL_BOOTSTAGE + bool "Boot timing and reported in SPL" + depends on BOOTSTAGE + help + Enable recording of boot time in SPL. To make this visible to U-Boot + proper, enable BOOTSTAGE_STASH as well. This will stash the timing + information when SPL finishes and load it when U-Boot proper starts + up. + config BOOTSTAGE_REPORT bool "Display a detailed boot timing report before booting the OS" depends on BOOTSTAGE @@ -37,14 +46,19 @@ config BOOTSTAGE_REPORT 29,916,167 26,005,792 bootm_start 30,361,327 445,160 start_kernel -config BOOTSTAGE_USER_COUNT - hex "Number of boot ID numbers available for user use" - default 20 +config BOOTSTAGE_RECORD_COUNT + int "Number of boot stage records to store" + default 30 + help + This is the size of the bootstage record list and is the maximum + number of bootstage records that can be recorded. + +config SPL_BOOTSTAGE_RECORD_COUNT + int "Number of boot stage records to store for SPL" + default 5 help - This is the number of available user bootstage records. - Each time you call bootstage_mark(BOOTSTAGE_ID_ALLOC, ...) - a new ID will be allocated from this stash. If you exceed - the limit, recording will stop. + This is the size of the bootstage record list and is the maximum + number of bootstage records that can be recorded. config BOOTSTAGE_FDT bool "Store boot timing information in the OS device tree" @@ -90,7 +104,7 @@ config BOOTSTAGE_STASH_ADDR config BOOTSTAGE_STASH_SIZE hex "Size of boot timing stash region" - default 4096 + default 0x1000 help This should be large enough to hold the bootstage stash. A value of 4096 (4KiB) is normally plenty. @@ -170,6 +184,39 @@ config BOOTDELAY See doc/README.autoboot for details. +config USE_BOOTARGS + bool "Enable boot arguments" + help + Provide boot arguments to bootm command. Boot arguments are specified + in CONFIG_BOOTARGS option. Enable this option to be able to specify + CONFIG_BOOTARGS string. If this option is disabled, CONFIG_BOOTARGS + will be undefined and won't take any space in U-Boot image. + +config BOOTARGS + string "Boot arguments" + depends on USE_BOOTARGS + help + This can be used to pass arguments to the bootm command. The value of + CONFIG_BOOTARGS goes into the environment value "bootargs". Note that + this value will also override the "chosen" node in FDT blob. + +config USE_BOOTCOMMAND + bool "Enable a default value for bootcmd" + help + Provide a default value for the bootcmd entry in the environment. If + autoboot is enabled this is what will be run automatically. Enable + this option to be able to specify CONFIG_BOOTCOMMAND as a string. If + this option is disabled, CONFIG_BOOTCOMMAND will be undefined and + won't take any space in U-Boot image. + +config BOOTCOMMAND + string "bootcmd value" + depends on USE_BOOTCOMMAND + default "run distro_bootcmd" if DISTRO_DEFAULTS + help + This is the string of commands that will be used as bootcmd and if + AUTOBOOT is set, automatically run. + menu "Console" config MENU @@ -211,6 +258,27 @@ config IDENT_STRING help This options adds the board specific name to u-boot version. +config LOGLEVEL + int "loglevel" + default 4 + range 0 8 + help + All Messages with a loglevel smaller than the console loglevel will + be compiled in. The loglevels are defined as follows: + + 0 (KERN_EMERG) system is unusable + 1 (KERN_ALERT) action must be taken immediately + 2 (KERN_CRIT) critical conditions + 3 (KERN_ERR) error conditions + 4 (KERN_WARNING) warning conditions + 5 (KERN_NOTICE) normal but significant condition + 6 (KERN_INFO) informational + 7 (KERN_DEBUG) debug-level messages + +config SPL_LOGLEVEL + int + default LOGLEVEL + config SILENT_CONSOLE bool "Support a silent console" help @@ -352,17 +420,97 @@ config SYS_STDIO_DEREGISTER endmenu +menu "Logging" + +config LOG + bool "Enable logging support" + help + This enables support for logging of status and debug messages. These + can be displayed on the console, recorded in a memory buffer, or + discarded if not needed. Logging supports various categories and + levels of severity. + +config SPL_LOG + bool "Enable logging support in SPL" + help + This enables support for logging of status and debug messages. These + can be displayed on the console, recorded in a memory buffer, or + discarded if not needed. Logging supports various categories and + levels of severity. + +config LOG_MAX_LEVEL + int "Maximum log level to record" + depends on LOG + default 5 + help + This selects the maximum log level that will be recorded. Any value + higher than this will be ignored. If possible log statements below + this level will be discarded at build time. Levels: + + 0 - panic + 1 - critical + 2 - error + 3 - warning + 4 - note + 5 - info + 6 - detail + 7 - debug + +config SPL_LOG_MAX_LEVEL + int "Maximum log level to record in SPL" + depends on SPL_LOG + default 3 + help + This selects the maximum log level that will be recorded. Any value + higher than this will be ignored. If possible log statements below + this level will be discarded at build time. Levels: + + 0 - panic + 1 - critical + 2 - error + 3 - warning + 4 - note + 5 - info + 6 - detail + 7 - debug + +config LOG_CONSOLE + bool "Allow log output to the console" + depends on LOG + default y + help + Enables a log driver which writes log records to the console. + Generally the console is the serial port or LCD display. Only the + log message is shown - other details like level, category, file and + line number are omitted. + +config LOG_SPL_CONSOLE + bool "Allow log output to the console in SPL" + depends on LOG_SPL + default y + help + Enables a log driver which writes log records to the console. + Generally the console is the serial port or LCD display. Only the + log message is shown - other details like level, category, file and + line number are omitted. + +config LOG_TEST + bool "Provide a test for logging" + depends on LOG + default y if SANDBOX + help + This enables a 'log test' command to test logging. It is normally + executed from a pytest and simply outputs logging information + in various different ways to test that the logging system works + correctly with varoius settings. + +endmenu + config DEFAULT_FDT_FILE string "Default fdt file" help This option is used to set the default fdt file to boot OS. -config SYS_NO_FLASH - bool "Disable support for parallel NOR flash" - default n - help - This option is used to disable support for parallel NOR flash. - config VERSION_VARIABLE bool "add U-Boot environment variable vers" default n @@ -385,7 +533,7 @@ config BOARD_LATE_INIT config DISPLAY_CPUINFO bool "Display information about the CPU during start up" - default y if ARM || BLACKFIN || NIOS2 || X86 || XTENSA + default y if ARM || NIOS2 || X86 || XTENSA help Display information about the CPU that U-Boot is running on when U-Boot starts up. The function print_cpuinfo() is called @@ -393,7 +541,7 @@ config DISPLAY_CPUINFO config DISPLAY_BOARDINFO bool "Display information about the board during start up" - default y if ARM || M68K || MIPS || PPC || SPARC || XTENSA + default y if ARM || M68K || MIPS || PPC || SANDBOX || XTENSA help Display information about the board that U-Boot is running on when U-Boot starts up. The board function checkboard() is called @@ -403,7 +551,6 @@ menu "Start-up hooks" config ARCH_EARLY_INIT_R bool "Call arch-specific init soon after relocation" - default y if X86 help With this option U-Boot will call arch_early_init_r() soon after relocation. Driver model is running by this point, and the cache @@ -420,7 +567,6 @@ config ARCH_MISC_INIT config BOARD_EARLY_INIT_F bool "Call board-specific init before relocation" - default y if X86 help Some boards need to perform initialisation as soon as possible after boot. With this option, U-Boot calls board_early_init_f() @@ -430,4 +576,16 @@ config BOARD_EARLY_INIT_F endmenu +menu "Security support" + +config HASH + bool # "Support hashing API (SHA1, SHA256, etc.)" + help + This provides a way to hash data in memory using various supported + algorithms (such as SHA1, MD5, CRC32). The API is defined in hash.h + and the algorithms it supports are defined in common/hash.c. See + also CMD_HASH for command-line access. + +endmenu + source "common/spl/Kconfig"