X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=common%2Fboard_r.c;h=c4fd3eaf8cc1834a1292c79062340847a006f681;hb=b810aa1dd1b2c7facf47ca607cd780ec7976fd16;hp=907b33cca7624124cd251b656db219a1e5052449;hpb=0dac731d1932027f4f813ec7aede35d5e30dec0e;p=u-boot

diff --git a/common/board_r.c b/common/board_r.c
index 907b33cca7..c4fd3eaf8c 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -33,6 +33,7 @@
 #endif
 #include <logbuff.h>
 #include <malloc.h>
+#include <mapmem.h>
 #ifdef CONFIG_BITBANGMII
 #include <miiphy.h>
 #endif
@@ -55,6 +56,9 @@
 #include <dm/root.h>
 #include <linux/compiler.h>
 #include <linux/err.h>
+#ifdef CONFIG_AVR32
+#include <asm/arch/mmu.h>
+#endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -128,6 +132,8 @@ static int initr_reloc_global_data(void)
 {
 #ifdef __ARM__
 	monitor_flash_len = _end - __image_copy_start;
+#elif defined(CONFIG_NDS32)
+	monitor_flash_len = (ulong)&_end - (ulong)&_start;
 #elif !defined(CONFIG_SANDBOX) && !defined(CONFIG_NIOS2)
 	monitor_flash_len = (ulong)&__init_end - gd->relocaddr;
 #endif
@@ -164,14 +170,17 @@ static int initr_serial(void)
 	return 0;
 }
 
-#ifdef CONFIG_PPC
+#if defined(CONFIG_PPC) || defined(CONFIG_M68K)
 static int initr_trap(void)
 {
 	/*
 	 * Setup trap handlers
 	 */
+#if defined(CONFIG_PPC)
 	trap_init(gd->relocaddr);
-
+#else
+	trap_init(CONFIG_SYS_SDRAM_BASE);
+#endif
 	return 0;
 }
 #endif
@@ -224,7 +233,9 @@ static int initr_unlock_ram_in_cache(void)
 #ifdef CONFIG_PCI
 static int initr_pci(void)
 {
+#ifndef CONFIG_DM_PCI
 	pci_init();
+#endif
 
 	return 0;
 }
@@ -279,6 +290,9 @@ static int initr_dm(void)
 	/* Save the pre-reloc driver model and start a new one */
 	gd->dm_root_f = gd->dm_root;
 	gd->dm_root = NULL;
+#ifdef CONFIG_TIMER
+	gd->timer = NULL;
+#endif
 	return dm_init_and_scan(false);
 }
 #endif
@@ -435,6 +449,9 @@ static int initr_env(void)
 		env_relocate();
 	else
 		set_default_env(NULL);
+#ifdef CONFIG_OF_CONTROL
+	setenv_addr("fdtcontroladdr", gd->fdt_blob);
+#endif
 
 	/* Initialize from environment */
 	load_addr = getenv_ulong("loadaddr", 16, load_addr);
@@ -459,13 +476,14 @@ static int initr_env(void)
 	return 0;
 }
 
-#ifdef CONFIG_SC3
-/* TODO: with new initcalls, move this into the driver */
-extern void sc3_read_eeprom(void);
-
-static int initr_sc3_read_eeprom(void)
+#ifdef CONFIG_SYS_BOOTPARAMS_LEN
+static int initr_malloc_bootparams(void)
 {
-	sc3_read_eeprom();
+	gd->bd->bi_boot_params = (ulong)malloc(CONFIG_SYS_BOOTPARAMS_LEN);
+	if (!gd->bd->bi_boot_params) {
+		puts("WARNING: Cannot allocate space for boot parameters\n");
+		return -ENOMEM;
+	}
 	return 0;
 }
 #endif
@@ -486,7 +504,7 @@ static int initr_api(void)
 #endif
 
 /* enable exceptions */
-#ifdef CONFIG_ARM
+#if defined(CONFIG_ARM) || defined(CONFIG_AVR32)
 static int initr_enable_interrupts(void)
 {
 	enable_interrupts();
@@ -529,11 +547,14 @@ static int initr_kgdb(void)
 }
 #endif
 
-#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
+#if defined(CONFIG_STATUS_LED)
 static int initr_status_led(void)
 {
+#if defined(STATUS_LED_BOOT)
 	status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
-
+#else
+	status_led_init();
+#endif
 	return 0;
 }
 #endif
@@ -569,7 +590,7 @@ static int initr_bbmii(void)
 static int initr_net(void)
 {
 	puts("Net:   ");
-	eth_initialize(gd->bd);
+	eth_initialize();
 #if defined(CONFIG_RESET_PHY_R)
 	debug("Reset Ethernet PHY\n");
 	reset_phy();
@@ -681,6 +702,12 @@ init_fnc_t init_sequence_r[] = {
 	/* TODO: could x86/PPC have this also perhaps? */
 #ifdef CONFIG_ARM
 	initr_caches,
+	/* Note: For Freescale LS2 SoCs, new MMU table is created in DDR.
+	 *	 A temporary mapping of IFC high region is since removed,
+	 *	 so environmental variables in NOR flash is not availble
+	 *	 until board_init() is called below to remap IFC to high
+	 *	 region.
+	 */
 #endif
 	initr_reloc_global_data,
 #if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500)
@@ -695,7 +722,7 @@ init_fnc_t init_sequence_r[] = {
 #ifdef CONFIG_DM
 	initr_dm,
 #endif
-#ifdef CONFIG_ARM
+#if defined(CONFIG_ARM) || defined(CONFIG_NDS32)
 	board_init,	/* Setup chipselects */
 #endif
 	/*
@@ -714,7 +741,7 @@ init_fnc_t init_sequence_r[] = {
 #ifdef CONFIG_NEEDS_MANUAL_RELOC
 	initr_manual_reloc_cmdtable,
 #endif
-#ifdef CONFIG_PPC
+#if defined(CONFIG_PPC) || defined(CONFIG_M68K)
 	initr_trap,
 #endif
 #ifdef CONFIG_ADDR_MAP
@@ -752,16 +779,13 @@ init_fnc_t init_sequence_r[] = {
 	initr_flash,
 #endif
 	INIT_FUNC_WATCHDOG_RESET
-#if defined(CONFIG_PPC)
+#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_X86)
 	/* initialize higher level parts of CPU like time base and timers */
 	cpu_init_r,
 #endif
 #ifdef CONFIG_PPC
 	initr_spi,
 #endif
-#if defined(CONFIG_X86) && defined(CONFIG_SPI)
-	init_func_spi,
-#endif
 #ifdef CONFIG_CMD_NAND
 	initr_nand,
 #endif
@@ -775,11 +799,11 @@ init_fnc_t init_sequence_r[] = {
 	initr_dataflash,
 #endif
 	initr_env,
+#ifdef CONFIG_SYS_BOOTPARAMS_LEN
+	initr_malloc_bootparams,
+#endif
 	INIT_FUNC_WATCHDOG_RESET
 	initr_secondary_cpu,
-#ifdef CONFIG_SC3
-	initr_sc3_read_eeprom,
-#endif
 #if defined(CONFIG_ID_EEPROM) || defined(CONFIG_SYS_I2C_MAC_OFFSET)
 	mac_read_from_eeprom,
 #endif
@@ -810,13 +834,14 @@ init_fnc_t init_sequence_r[] = {
 	initr_kgdb,
 #endif
 	interrupt_init,
-#if defined(CONFIG_ARM)
+#if defined(CONFIG_ARM) || defined(CONFIG_AVR32)
 	initr_enable_interrupts,
 #endif
-#if defined(CONFIG_X86) || defined(CONFIG_MICROBLAZE)
+#if defined(CONFIG_X86) || defined(CONFIG_MICROBLAZE) || defined(CONFIG_AVR32) \
+	|| defined(CONFIG_M68K)
 	timer_init,		/* initialize timer */
 #endif
-#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
+#if defined(CONFIG_STATUS_LED)
 	initr_status_led,
 #endif
 	/* PPC has a udelay(20) here dating from 2002. Why? */
@@ -878,6 +903,10 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
 	int i;
 #endif
 
+#ifdef CONFIG_AVR32
+	mmu_init_r(dest_addr);
+#endif
+
 #if !defined(CONFIG_X86) && !defined(CONFIG_ARM) && !defined(CONFIG_ARM64)
 	gd = new_gd;
 #endif