X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=common%2Fcmd_mmc.c;h=2d51927060280bfc0289f00b5514131075829dd7;hb=337b0c52b3296f371d04aef71a833e09110e0e6b;hp=da5fef9db9dd936a995a92e04826a69fe0521635;hpb=4641c211f6e37454c30770521c4de79c725036b0;p=u-boot

diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
index da5fef9db9..2d51927060 100644
--- a/common/cmd_mmc.c
+++ b/common/cmd_mmc.c
@@ -131,36 +131,6 @@ U_BOOT_CMD(
 	"- display info of the current MMC device"
 );
 
-#ifdef CONFIG_SUPPORT_EMMC_BOOT
-static int boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access)
-{
-	int err;
-	err = mmc_boot_part_access(mmc, ack, part_num, access);
-
-	if ((err == 0) && (access != 0)) {
-		printf("\t\t\t!!!Notice!!!\n");
-
-		printf("!You must close EMMC boot Partition");
-		printf("after all images are written\n");
-
-		printf("!EMMC boot partition has continuity");
-		printf("at image writing time.\n");
-
-		printf("!So, do not close the boot partition");
-		printf("before all images are written.\n");
-		return 0;
-	} else if ((err == 0) && (access == 0))
-		return 0;
-	else if ((err != 0) && (access != 0)) {
-		printf("EMMC boot partition-%d OPEN Failed.\n", part_num);
-		return 1;
-	} else {
-		printf("EMMC boot partition-%d CLOSE Failed.\n", part_num);
-		return 1;
-	}
-}
-#endif
-
 static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	enum mmc_state state;
@@ -195,7 +165,7 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 			return 1;
 		else
 			return 0;
-	} else if (strncmp(argv[1], "part", 4) == 0) {
+	} else if (strcmp(argv[1], "part") == 0) {
 		block_dev_desc_t *mmc_dev;
 		struct mmc *mmc;
 
@@ -273,15 +243,16 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
 		return 0;
 #ifdef CONFIG_SUPPORT_EMMC_BOOT
-	} else if ((strcmp(argv[1], "open") == 0) ||
-			(strcmp(argv[1], "close") == 0)) {
+	} else if (strcmp(argv[1], "partconf") == 0) {
 		int dev;
 		struct mmc *mmc;
-		u8 part_num, access = 0;
+		u8 ack, part_num, access;
 
-		if (argc == 4) {
+		if (argc == 6) {
 			dev = simple_strtoul(argv[2], NULL, 10);
-			part_num = simple_strtoul(argv[3], NULL, 10);
+			ack = simple_strtoul(argv[3], NULL, 10);
+			part_num = simple_strtoul(argv[4], NULL, 10);
+			access = simple_strtoul(argv[5], NULL, 10);
 		} else {
 			return CMD_RET_USAGE;
 		}
@@ -293,32 +264,53 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		}
 
 		if (IS_SD(mmc)) {
-			printf("SD device cannot be opened/closed\n");
+			puts("PARTITION_CONFIG only exists on eMMC\n");
 			return 1;
 		}
 
-		if ((part_num <= 0) || (part_num > MMC_NUM_BOOT_PARTITION)) {
-			printf("Invalid boot partition number:\n");
-			printf("Boot partition number cannot be <= 0\n");
-			printf("EMMC44 supports only 2 boot partitions\n");
+		/* acknowledge to be sent during boot operation */
+		return mmc_set_part_conf(mmc, ack, part_num, access);
+	} else if (strcmp(argv[1], "bootbus") == 0) {
+		int dev;
+		struct mmc *mmc;
+		u8 width, reset, mode;
+
+		if (argc == 6) {
+			dev = simple_strtoul(argv[2], NULL, 10);
+			width = simple_strtoul(argv[3], NULL, 10);
+			reset = simple_strtoul(argv[4], NULL, 10);
+			mode = simple_strtoul(argv[5], NULL, 10);
+		} else {
+			return CMD_RET_USAGE;
+		}
+
+		mmc = find_mmc_device(dev);
+		if (!mmc) {
+			printf("no mmc device at slot %x\n", dev);
 			return 1;
 		}
 
-		if (strcmp(argv[1], "open") == 0)
-			access = part_num; /* enable R/W access to boot part*/
-		else
-			access = 0; /* No access to boot partition */
+		if (IS_SD(mmc)) {
+			puts("BOOT_BUS_WIDTH only exists on eMMC\n");
+			return 1;
+		}
 
 		/* acknowledge to be sent during boot operation */
-		return boot_part_access(mmc, 1, part_num, access);
-
-	} else if (strcmp(argv[1], "bootpart") == 0) {
+		return mmc_set_boot_bus_width(mmc, width, reset, mode);
+	} else if (strcmp(argv[1], "bootpart-resize") == 0) {
 		int dev;
-		dev = simple_strtoul(argv[2], NULL, 10);
+		struct mmc *mmc;
+		u32 bootsize, rpmbsize;
 
-		u32 bootsize = simple_strtoul(argv[3], NULL, 10);
-		u32 rpmbsize = simple_strtoul(argv[4], NULL, 10);
-		struct mmc *mmc = find_mmc_device(dev);
+		if (argc == 5) {
+			dev = simple_strtoul(argv[2], NULL, 10);
+			bootsize = simple_strtoul(argv[3], NULL, 10);
+			rpmbsize = simple_strtoul(argv[4], NULL, 10);
+		} else {
+			return CMD_RET_USAGE;
+		}
+
+		mmc = find_mmc_device(dev);
 		if (!mmc) {
 			printf("no mmc device at slot %x\n", dev);
 			return 1;
@@ -438,12 +430,12 @@ U_BOOT_CMD(
 	"mmc dev [dev] [part] - show or set current mmc device [partition]\n"
 	"mmc list - lists available devices\n"
 #ifdef CONFIG_SUPPORT_EMMC_BOOT
-	"mmc open <dev> <boot_partition>\n"
-	" - Enable boot_part for booting and enable R/W access of boot_part\n"
-	"mmc close <dev> <boot_partition>\n"
-	" - Enable boot_part for booting and disable access to boot_part\n"
-	"mmc bootpart <device num> <boot part size MB> <RPMB part size MB>\n"
-	" - change sizes of boot and RPMB partitions of specified device\n"
+	"mmc bootbus dev boot_bus_width reset_boot_bus_width boot_mode\n"
+	" - Set the BOOT_BUS_WIDTH field of the specified device\n"
+	"mmc bootpart-resize <dev> <boot part size MB> <RPMB part size MB>\n"
+	" - Change sizes of boot and RPMB partitions of specified device\n"
+	"mmc partconf dev boot_ack boot_partition partition_access\n"
+	" - Change the bits of the PARTITION_CONFIG field of the specified device\n"
 #endif
 	"mmc setdsr - set DSR register value\n"
 	);