X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=configs%2FMele_M9_defconfig;h=dc7901f9afc5fd6cbaf88aae81547d10946ff4d1;hb=51f29370366a40fc54eec579c7567bc1356da6e4;hp=ea35024c1bcc0c74375500a4d86fcfbf052fb243;hpb=3f2f1a00394eb7ce7176f9d0930e40e55ba2c79c;p=u-boot

diff --git a/configs/Mele_M9_defconfig b/configs/Mele_M9_defconfig
index ea35024c1b..dc7901f9af 100644
--- a/configs/Mele_M9_defconfig
+++ b/configs/Mele_M9_defconfig
@@ -1,21 +1,22 @@
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
-CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-m9"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN6I=y
-CONFIG_DRAM_CLK=312
 CONFIG_DRAM_ZQ=120
-# The Mele M9 uses 3.3V for general IO
-CONFIG_AXP221_DCDC1_VOLT=3300
-# Ethernet phy power
-CONFIG_AXP221_DLDO1_VOLT=3300
-# USB hub power
-CONFIG_AXP221_DLDO4_VOLT=3300
-# Wifi power
-CONFIG_AXP221_ALDO1_VOLT=3300
-# Vbus gpio for usb1
 CONFIG_USB1_VBUS_PIN="PC27"
-# No Vbus gpio for usb2
 CONFIG_USB2_VBUS_PIN=""
+CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-m9"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_ISO_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_SUN7I_GMAC=y
+CONFIG_AXP_DCDC1_VOLT=3300
+CONFIG_AXP_ALDO1_VOLT=3300
+CONFIG_AXP_DLDO1_VOLT=3300
+CONFIG_AXP_DLDO4_VOLT=3300
+CONFIG_USB_EHCI_HCD=y