X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=configs%2FYones_Toptech_BD1078_defconfig;h=dcdb51a396eacc5016d2a6976902ce02d2fdf03c;hb=a3cc43551f8f1cab156d02a44999c07a7261fd14;hp=99cc0a77416c1a7b705155f6030b98b0ca43e3bd;hpb=849d597bac145d2fd352349892206e0a60366577;p=u-boot

diff --git a/configs/Yones_Toptech_BD1078_defconfig b/configs/Yones_Toptech_BD1078_defconfig
index 99cc0a7741..dcdb51a396 100644
--- a/configs/Yones_Toptech_BD1078_defconfig
+++ b/configs/Yones_Toptech_BD1078_defconfig
@@ -1,27 +1,29 @@
-# The Yones Toptech BD1078 is an A20 based 10" tablet with a 1024x600 lcd
-# screen, volume up/down and back buttons, headphones jack, mini hdmi, micro
-# usb (otg), micro usb (host), external micro-sd slot and a separate internal
-# micro-sd slot.
-#
-# Also see: http://linux-sunxi.org/Yones_Toptech_BD1078
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
-CONFIG_FDTFILE="sun7i-a20-yones-toptech-bd1078.dtb"
-CONFIG_MMC_SUNXI_SLOT_EXTRA=1
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN7I=y
+CONFIG_DRAM_CLK=408
+CONFIG_MMC0_CD_PIN="PH1"
+CONFIG_MMC1_CD_PIN="PH2"
 CONFIG_MMC1_PINS="PH"
-CONFIG_USB_MUSB_SUNXI=y
+CONFIG_MMC_SUNXI_SLOT_EXTRA=1
 CONFIG_USB0_VBUS_PIN="PB9"
 CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_AXP_GPIO=y
 CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:24,pclk_khz:63000,le:32,ri:287,up:22,lo:12,hs:1,vs:1,sync:3,vmode:0"
 CONFIG_VIDEO_LCD_DCLK_PHASE=0
-CONFIG_VIDEO_LCD_PANEL_LVDS=y
 CONFIG_VIDEO_LCD_POWER="PH8"
 CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
-CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW=n
-CONFIG_ARM=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_MACH_SUN7I=y
-CONFIG_DRAM_CLK=408
-CONFIG_DRAM_ZQ=127
-CONFIG_DRAM_EMR1=4
+# CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set
+CONFIG_VIDEO_LCD_PANEL_LVDS=y
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-yones-toptech-bd1078"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+CONFIG_SPL_I2C_SUPPORT=y
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_ISO_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_USB_MUSB_HOST=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y