X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=configs%2Fdisplay5_factory_defconfig;h=aa3bd4c8cfcc6baf20fe757009425932bf13dd4c;hb=8376e0e6f74c5e86a821cb81990f2b9429a364f3;hp=b65485fde7108546822f5ed81c93bab6e2860a7f;hpb=3bb6dc04a9b78c3db7c130bea7e817d77add275e;p=u-boot

diff --git a/configs/display5_factory_defconfig b/configs/display5_factory_defconfig
index b65485fde7..aa3bd4c8cf 100644
--- a/configs/display5_factory_defconfig
+++ b/configs/display5_factory_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
+CONFIG_SYS_TEXT_BASE=0x17800000
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
@@ -7,18 +8,20 @@ CONFIG_TARGET_DISPLAY5=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SPL=y
 CONFIG_FIT=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="run factory"
-CONFIG_SPL=y
+CONFIG_SUPPORT_RAW_INITRD=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
 CONFIG_SPL_DMA_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SPL_SPI_LOAD=y
 CONFIG_SPL_USB_HOST_SUPPORT=y
 CONFIG_SPL_USB_GADGET_SUPPORT=y
 CONFIG_SPL_USB_SDP_SUPPORT=y
@@ -30,7 +33,6 @@ CONFIG_CMD_ASKENV=y
 CONFIG_CRC32_VERIFY=y
 CONFIG_CMD_EEPROM=y
 CONFIG_CMD_DFU=y
-# CONFIG_CMD_FPGA is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
@@ -57,6 +59,7 @@ CONFIG_PARTITION_TYPE_GUID=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_DFU_MMC=y
 CONFIG_DFU_SF=y
+CONFIG_FSL_ESDHC=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_BAR=y
 CONFIG_SPI_FLASH_SPANSION=y
@@ -64,8 +67,9 @@ CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
 CONFIG_NETDEVICES=y
 CONFIG_FEC_MXC=y
-# CONFIG_SPL_DM_SERIAL is not set
 CONFIG_MXC_UART=y
+CONFIG_SPI=y
+CONFIG_MXC_SPI=y
 CONFIG_USB=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="Liebherr"